11 Result(s)
-
Article
Design of a piston forging process using a hybrid Taguchi method and multiple criteria decision-making
In the process of hot forging aluminum pistons, many factors must be considered. In this study, the goal to which was to design the process parameters of the piston in forging, material temperatures, friction ...
-
Chapter and Conference Paper
Study on Super Stable All-Solid-State Battery at High Temperature
All-solid-state type lithium-ion batteries are expected to become the next generation power sources because of their safety, reliability, high energy density, and incombustibility. The typical all-solid-state ...
-
Chapter and Conference Paper
Electrochemical Performance of LiMn0.5-XNi0.5-XAl2XO2 by Hydrothermal Method
In lithium ion batteries, lithium cobalt oxide is extensively used as a cathode material. However, cobalt has high cost and toxicity, researchers have been investigating for the development of a cobalt free ca...
-
Article
Dithering method for improving the surface quality of a microstructure in projection microstereolithography
In layered manufacturing, geometrical gap occurs between the computer-aided design (CAD) model and the fabricated, due to the stair-step** effect. It will deteriorate the surface quality of the microstructur...
-
Article
Cross-section segmentation for improving the shape accuracy of microstructure array in projection microstereolithography
Microstereolithography is a microfabrication technology done in a layer-by-layer fashion. It is useful to fabricate a microstructure with both a high aspect ratio and a complex shape. Projection microstereolit...
-
Article
Mass production of 3-D microstructures using projection microstereolithography
Microstereolithography (MSL) technology is derived from the conventional stereolithography process and can meet the demands for fabricating complex 3-D microstructures with high resolution. This technology can...
-
Article
Design of microstereolithography system based on dynamic image projection for fabrication of three-dimensional microstructures
As demands for complex microstructures with high aspect ratios have increased, the existing methods, MEMS and LIGA, have had difficulties co** with the number of masks and fabricable heights. A microstereoli...
-
Article
A real-time intelligent multiple fault diagnostic system
Modern manufacturing systems and their failure modes are very complex, and efficient fault diagnosis is essential for higher productivity. However, traditional fault diagnostic systems that perform sequential ...
-
Article
A real-time intelligent multiple fault diagnostic system
Modern manufacturing systems and their failure modes are very complex, and efficient fault diagnosis is essential for higher productivity. However, traditional fault diagnostic systems that perform sequential ...
-
Article
Determination of fabrication direction to minimize post-machining in FDM by prediction of non-linear roughness characteristics
Rapid Prototy** (RP) is a technology that generates physical objects directly from CAD data. As a prototype can be rapidly built by using this technology, the product cycle is remarkably reduced in manufactu...
-
Article
Hybrid shop floor control system for Computer Integrated Manufacturing (CIM)
A shop floor can be considered as an important level to develop Computer Integrated Manufacturing system (CIMs). However, a shop floor is a dynamic environment where unexpected events continuously occur, and i...
