![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Evaluation of flow boiling heat transfer in horizontal circular trapezoidal-shaped microfin tube
Experimental investigations were conducted to analyze the evaporation heat transfer of R407c inside a horizontal microfin (trapezoidal-shaped) Cu-tube. The experiments were performed in equipment specifically ...
-
Article
Surface wettability change on TF nanocoated surfaces during pool boiling heat transfer of refrigerant R-141b
Experiments were performed to demonstrate the impact of surface wettability on the nucleate boiling heat transfer of Silicon Dioxide (SiO2) Thin Film (TF) nanocoated surfaces using the saturated refrigerant R-141...
-
Chapter and Conference Paper
Energy Saving Potential of an Air-Conditioning System with Desiccant and Solar Assisted Ventilation
In this paper, a simulation analysis has been performed using Energy Plus software on the conventional vapor compression-based building cooling system for warm-humid climate. In order to achieve an energy effi...
-
Chapter and Conference Paper
Energy Production Through Gasification of Waste Biomass in Punjab Region
This paper presents useful energy (gas and power) production from the three waste biomass (dried grass, leaves, and dead branches) through gasification technology. These waste biomasses were collected in the I...
-
Article
Generalized inverse analysis for fins of different profiles with all temperature-dependent parameters
An inverse analysis is done to predict unknown and optimal dimensions of a fin satisfying either a given temperature or maximizing heat transfer rate. The profile simulating many geometries involves all temper...
-
Article
A fin design employing an inverse approach using simplex search method
This paper is aimed at estimating unknown parameters in a rectangular fin satisfying a predefined temperature. The differential transformation along with simplex method is used. The study has been done for dif...