Skip to main content

previous disabled Page of 53
and
  1. No Access

    Article

    A B-element-rich representative of the α-V3S type: AuPb3

    The crystal structure of the recently described intermetallic phase AuPb3 was found to be of the tetragonal α-V3S type witha=11.959Å andc=5.877Å; the atomic positions have been refined. Relationships to the Fe3P ...

    R. Wang, B. C. Giessen in Metallurgical Transactions (1971)

  2. No Access

    Article

    Formation of metastable low temperature allotropie solid solutions in rare earth-zirconium systems

    The mutual solid solubilities of the heavy rare earth metals (Gd, Tb, Dy, Ho, Er, and Lu) with zirconium have been greatly extended by splat quenching the alloys from the molten state to room temperature. All ...

    R. Wang in Metallurgical Transactions (1972)

  3. No Access

    Article

    Direct observations of dislocations in splat-cooled Co5Pr

    H. P. Singh, R. Wang, L. E. Murr in Journal of Materials Science (1972)

  4. No Access

    Article

    Metastable solubility limits of primary HCP solid solutions quenched from the liquid state

    The extension of metastable solid solubility limits of Ti, Zr, and Hf in hcp rare earth elements Gd, Tb, Dy, Ho, Er and Lu, including Sc and Y, were obtained by quenching alloys from the liquid state Both the ...

    R. Wang, Y. B. Kim in Metallurgical transactions (1974)

  5. No Access

    Article

    Observation of twin faults in sputter-deposited high-purity nickel

    R. Wang, S. D. Dahlgren in Journal of Materials Science (1975)

  6. No Access

    Article

    An electron microscopy study of the metastable structures in splat-cooled erbium-zirconium alloys

    The metastable structures produced by splat-cooling in Er-Zr alloys were investigated by using transmission electron microscopy and X ray analysis in order to deduce the mechanism by which a continuous series ...

    G. H. Narayanan, R. Wang in Journal of Materials Science (1976)

  7. No Access

    Article

    Short-range structure of amorphous alloys (reply)

    R. WANG in Nature (1979)

  8. No Access

    Article

    Effect of oxygen on microstructures of high-rate sputter-deposited Nb3Sn superconductors

    The role of excess oxygen and deposition temperature on the microstructure and critical temperature (T c ) has been studied in high-rate, sputter deposited Nb3Sn...

    J. L. Brimhall, R. Wang in Metallurgical Transactions A (1979)

  9. No Access

    Article

    Annealing behaviour of amorphous μ- phase alloys of FeW and MoCo

    Crystallization in sputter deposited, amorphous FeW and MoCo of μ-phase composition alloys has been studied using transmission electron microscopy (TEM), electrical resistivity and X-ray diffraction. The amorphou...

    J. L. Brimhall, R. Wang, H. E. Kissinger in Journal of Materials Science (1980)

  10. No Access

    Article

    Crystallization of sputter deposited amorphous MoNi

    A crystallization temperature of ∼ 1000 K was observed for an amorphous alloy of MoNi. Recovery of the amorphous matrix prior to crystallization was noted, however. During crystallization, a Mo-rich phase and ...

    J. L. Brimhall, H. E. Kissinger, R. Wang in Journal of Materials Science (1981)

  11. No Access

    Chapter and Conference Paper

    Cyclic Strain Localization and Fatigue Crack Initiation in Persistent Slip Bands in Face-Centred Cubic Metals and Single-Phase Alloys

    The development of persistent slip bands (PSBs) exhibiting the ladder structure in fatigued metals and alloys is discussed in terms of the slip mode and the irreversibility of slip under conditions of cyclic s...

    H. Mughrabi, R. Wang in Defects and Fracture (1982)

  12. No Access

    Article

    Corrosion behavior of Ni+-Ion Irradiated NiTi Alloys

    Corrosion behavior of Ni+ -irradiated NiTi alloys was studied in chloride solutions, together with unirradiated NiTi material with different surface conditions. Ion irradiation with either 2.5 or 5 MeV Ni+ ions t...

    R. Wang, J. L. Brimhall in MRS Online Proceedings Library (1983)

  13. No Access

    Article

    MCC Corrosion Tests at Reference Testing Conditions for A27 Cast steel in Hanford Ground Water

    The Materials Characterization Center (MCC) at Pacific Northwest Lab- oratory is performing three kinds of corrosion tests for the Basalt Waste Isolation Project (BWIP) to establish the interlaboratory reprodu...

    M. D. Merz, F. Gerber, R. Wang in MRS Online Proceedings Library (1986)

  14. No Access

    Article

    Direct TEM observation of microstructures of the austenitic/carbon steels welded joint

    The successive alteration of the microstructure from the weld metal zone through weld bonds to the heat-affected zone of a Cr18Ni13 austenitic-0.45% C steels welded joint has been observed using transmission elec...

    C. Pan, R. Wang, J. Gui, Y. Shi in Journal of Materials Science (1990)

  15. No Access

    Article

    Antiplane eigenstrain problem of a circular inclusion in nonlocal elasticity

    The antiplane eigenstrain problem of a circular inclusion is investigated in nonlocal elasticity. The nonlocals tress fields are obtained analytically by generalizing the classical line force concept to the ca...

    R. Wang in Acta Mechanica (1990)

  16. No Access

    Article

    Varicocele in the rat: a new experimental model

    With no consistent animal prototype for the study of varicocele, we set out to create a model in the rat by complete ligation of the main branch of left spermatic vein (MBSV) or by partial ligation of the left...

    R. Wang, J. -S. Chang, X. -M. Zhou, D. -Y. Chen in Urological Research (1991)

  17. No Access

    Article

    Dissipative hydrodynamic oscillators

    The Kelvin-Helmholtz interfacial instability of two flowing superposed viscous liquids is described in terms of a dissipative harmonic-oscillator model. The instability threshold corresponds to the vanishing v...

    R. Wang, X. -L. Chu, M. G. Velarde, A. Sanfeld in Il Nuovo Cimento D (1992)

  18. No Access

    Article

    Application of nonlocal elasticity to the energetics for solute atoms in body-centered cubic transition metals with dislocations

    The self-energy of interstitial atoms and the interaction energies between edge or screw dislocations and interstitial atoms at octahedral or tetrahedral interstitial positions in body-centered cubic transitio...

    R. Wang, G. L. Chen, Z. Q. Sun in Metallurgical Transactions A (1992)

  19. No Access

    Chapter and Conference Paper

    Growth characteristics of the diatoms Pseudonitzschia pungens and P. fraudulenta exposed to ultraviolet radiation

    Interest in the biology of planktonic, chain-forming Pseudonitzschia species has grown recently after the discovery of toxin production in Pseudonitzschia pungens and related taxa, following the outbreak of shell...

    P. E. Hargraves, J. Zhang, R. Wang, Y. Shimizu in Twelfth International Diatom Symposium (1993)

  20. No Access

    Chapter and Conference Paper

    Perspective on TCAD Integration at Berkeley

    A perspective on TCAD integration is given along with highlights from work at Berkeley on applications and future systems which contain exploratory aspects of interest in TCAD development. The aspects of inter...

    A. Neureuther, R. Wang, J. Helmsen in Technology CAD Systems (1993)

previous disabled Page of 53