Skip to main content

7 Result(s)

within P Matteazzi Remove this filter Materials Science Remove this filter Characterization and Evaluation of Materials Remove this filter

and

  1. No Access

    Article

    Mössbauer surface study of nitrogen-implanted high carbon martensite

    G. Principi, P. Matteazzi, E. Ramous, G. Longworth in Journal of Materials Science (1980)

  2. No Access

    Article

    Mechanically driven syntheses of carbides and silcides

    Most metal carbides or slicides may be synthesized at room temperature, by ball milling mixtures of elemental powders for some tens of hours with a vibratory mill. Both stable and metastable compounds containi...

    G. Le Caër, E. Bauer-Grosse, A. Pianelli, E. Bouzy… in Journal of Materials Science (1990)

  3. No Access

    Article

    Thermal evolution of Co1−x-Px electrodeposited ribbons and its influence on the electrical resistivity

    Co-P ribbons have been obtained by electrodeposition on aluminium substrates. The effect of changing the current density (in the range 8–19 A dm−2) and the H3PO3 concentration on the nature of the phases present ...

    F. Branda, L. Lanotte, A. Costantini, P. Matteazzi in Journal of Materials Science (1993)

  4. No Access

    Article

    Crystallization of amorphous Fe73.5Si13.5B9Nb3Cu1

    A study is reported on the devitrification behaviour of the amorphous alloy Fe73.5Si13.5B9Nb3Cu1. Samples of the studied glass underwent isothermal and non-isothermal heat treatments in a thermal analysis appa...

    F Branda, A Costantini, L Lanotte, P Matteazzi in Journal of Materials Science (1997)

  5. No Access

    Article

    Mechanical properties and deformation mechanisms of nanocrystalline Fe/Cu 60/40 composites

    The effect of grain size upon the strength of nanocrystalline iron/copper (Fe/Cu) composites has been explored. Composites of composition 60 Fe/40 Cu (by weight) were produced by consolidation of ball-milled p...

    V. L. Tagarielli, N. A. Fleck, A. Colella, P. Matteazzi in Journal of Materials Science (2011)

  6. No Access

    Article

    Coefficient of Friction Measured from Nano- to Macro-Normal Loads on Plasma Sprayed Nanostructured Cermet Coatings

    Alumina dispersed FeCuAl-based nanostructured cermet coatings were deposited from nanostructured powders by atmospheric plasma spraying on low carbon steel substrates. Nanostructuring was retained in the depos...

    A. K. Basak, J.-P. Celis, M. Vardavoulias… in Metallurgical and Materials Transactions A (2014)

  7. No Access

    Article

    Structural and Tribological Properties of Nanostructured Supersonic Cold Sprayed Ni-20 wt.% Sn Coatings

    80-μm-thick nanostructured coatings consisting of a Ni solid solution, Ni3Sn, Ni3Sn2, and metastable NiSn intermetallic phases were deposited via supersonic cold spraying onto inconel 718 alloy substrates. These ...

    E. P. Georgiou, S. Dosta, J. Fernández, P. Matteazzi… in Journal of Thermal Spray Technology (2016)