Skip to main content

109 Result(s)

within Mingliang **an Remove this filter Materials Science Remove this filter English Remove this filter

previous disabled Page of 6
and

  1. No Access

    Article

    Unraveling the Influence of Static Magnetic Field on Carbide Precipitation and Mechanical Properties in Large-Scale H13 Hot Work Die Steel

    In order to evaluate the potential application advantages of static magnetic field on the development of electroslag remelted large-scale H13 steel technology, the carbides, inclusions, solute segregation and ...

    Chengkuan Ma, Mingliang Zhang, Yi Zhang… in Metallurgical and Materials Transactions B (2024)

  2. No Access

    Article

    Photothermal therapy of tuberculosis using targeting pre-activated macrophage membrane-coated nanoparticles

    Conventional antibiotics used for treating tuberculosis (TB) suffer from drug resistance and multiple complications. Here we propose a lesion–pathogen dual-targeting strategy for the management of TB by coating M...

    Bin Li, Wei Wang, Lu Zhao, Yunxia Wu, **aoxue Li, Dingyuan Yan… in Nature Nanotechnology (2024)

  3. No Access

    Article

    Design of Non-Heat Treatable High Pressure Die Casting Al Alloys: A Review

    In recent years, Non-Heat Treatable High Pressure Die Casting Al alloys (NHT-HPDC Al alloys) have been proposed and developed for integrated die casting in the automotive industry. These alloys exhibit excelle...

    Hongyi Zhu, Cunjuan **a, Huawei Zhang… in Journal of Materials Engineering and Perfo… (2024)

  4. No Access

    Article

    Numerical Investigation on Grain Structure of Magnetic-Controlled Electroslag Remelted Ingot Based on CAFE and Equivalent Treatment Method

    A transient two-dimensional axisymmetric model is developed to investigate the influence of the applied transverse static magnetic field (TSMF) on the grain morphology of the electroslag remelted (ESR) ingot. ...

    Zhibin **a, Zhonghao Sun, Mingliang Zhang… in Metallurgical and Materials Transactions B (2024)

  5. Article

    Open Access

    Hard ferromagnetism in van der Waals Fe3GaTe2 nanoflake down to monolayer

    Two-dimensional (2D) magnetic materials are of not only fundamental scientific interest but also promising candidates for numerous applications. However, so far only a few intrinsic magnets with long-ranged or...

    Mingjie Wang, Bin Lei, Kejia Zhu, Yazhou Deng… in npj 2D Materials and Applications (2024)

    Download PDF (1113 KB) View Article

  6. No Access

    Chapter

    Selected Recent Work on Endo-Functionalization of Cylindrical Macrocyclic Artificial Receptors for Mimicking Protein–Ligand Interactions

    In medicinal chemistry, a significant part of the process involves modifying the way a small molecule interacts with a target receptor, which is typically a protein. The objective is usually to enhance or damp...

    Yahu A. Liu, Zhuo Wang, Weibo Hu… in Advanced Materials for Multidisciplinary A… (2024)

  7. No Access

    Article

    MAPbBr3/Bi2WO6 Z-scheme-heterojunction photocatalysts for photocatalytic CO2 reduction

    Photocatalytic CO2 reduction has emerged as a promising strategy for converting solar energy into valuable chemicals, capturing the attention of scientists across various disciplines. Organic and inorganic perovs...

    Yawen Zhang, Njemuwa Nwaji, Lihua Wu, Mingliang **… in Journal of Materials Science (2024)

  8. No Access

    Article

    Numerical Investigation About the Effect of Axial Static Magnetic Field on Improvement of Metal Pool Profile During Electroslag Remelting Process

    A transient two-dimensional (2D) coupled mathematical model was developed to study the effect of external axial static magnetic field (ASMF) on the evolution of metal pool profiles. Electromagnetic flow, heat ...

    Zhibin **a, Zhonghao Sun, Mingliang Zhang… in Metallurgical and Materials Transactions B (2023)

  9. No Access

    Article

    Effect of Post-Weld Heat Treatment on the Microstructure and Mechanical Properties of ERNiCrMo-3 Weld Metals

    A investigation was done to determine the effect of post-weld heat treatment on the microstructure and mechanical properties of ERNiCrMo-3 weld metals produced by metal inert gas shielded welding. The microstr...

    Mingliang Ji, **chu Wan, Xu Zhang… in Transactions of the Indian Institute of Me… (2023)

  10. No Access

    Article

    Achieving ultrahigh fatigue resistance in AlSi10Mg alloy by additive manufacturing

    Since the first discovery of the fatigue phenomenon in the late 1830s, efforts to fight against fatigue failure have continued. Here we report a fatigue resistance phenomenon in nano-TiB2-decorated AlSi10Mg enabl...

    Chengyi Dan, Yuchi Cui, Yi Wu, Zhe Chen, Hui Liu, Gang Ji, Yakai **ao… in Nature Materials (2023)

  11. No Access

    Article

    Enhanced high temperature mechanical properties and heat resistance of an Al–Cu–Mg–Fe–Ni matrix composite reinforced with in-situ TiB2 particles

    Enhancing the high temperature mechanical properties and the thermal stability of aluminum alloys are in urgent demand for the lightweight application scenarios (such as pistons, fan blades, crankshafts) worki...

    Siming Ma, **g Dai, Chengcheng Zhang, Mingliang Wang… in Journal of Materials Science (2023)

  12. No Access

    Article

    Interatomic electron transfer promotes electroreduction CO2-to-CO efficiency over a CuZn diatomic site

    Diatomic site catalysts (DACs) with two adjacent atomic metal species can provide synergistic interactions and more sophisticated functionalities to break the bottleneck of intrinsic drawbacks of single atom c...

    Jican Hao, Han Zhu, Qi Zhao, Jiace Hao, Shuanglong Lu, **aofan Wang… in Nano Research (2023)

  13. No Access

    Article

    Synergistic effect of diethylene triamine penta(methylene phosphonic acid) and graphene oxide barrier on anti-scaling and anti-corrosion performance of superhydrophobic coatings

    In this study, a novel diethylene triamine penta(methylene phosphonic acid) (DTPMPA)- and graphene oxide (GO)-modified superhydrophobic anodized aluminum (DGSAA) coating was fabricated. The obtained coatings w...

    Mingliang Zhu, Hongwei Li, Ruixia Yuan, Huijuan Qian… in Frontiers of Materials Science (2023)

  14. Article

    Open Access

    Abnormal thickness-dependent magneto-transport properties of vdW magnetic semiconductor Cr2Si2Te6

    Cr2Si2Te6 (CST) is a van der Waals (vdW) ferromagnetic semiconductor. The unique spin model and temperature-dependent magnetic ordering of CST provide opportunities for the next generation of two-dimensional (2D)...

    Yun Li, Zheng Chen, Jie Wang, Teng li, Mingliang Tian… in npj 2D Materials and Applications (2023)

    Download PDF (1785 KB) View Article

  15. No Access

    Article

    Microstructure and mechanical properties of an in-situ TiB2 particle reinforced AlSi10Mg composite additive manufactured by selective electron beam melting

    Selective electron beam melting (SEBM) has been recently employed for additive manufacturing (AM) Al alloys but showing comparatively low hardness and strength. In this work, SEBM technique was employed to add...

    Kaiwei Wu, Siming Ma, **n Fang, Yang Li, Wenbin Kan… in Journal of Materials Science (2023)

  16. No Access

    Article

    Oligomer nanoparticle release from polylactic acid plastics catalysed by gut enzymes triggers acute inflammation

    The health risks of exposure to ‘eco-friendly’ biodegradable plastics of anthropogenic origin and their effects on the gastrointestinal tract are largely unknown. Here we demonstrate that the enzymatic hydroly...

    Meng**g Wang, Qianqian Li, Changzhi Shi, Jia Lv, Youdong Xu… in Nature Nanotechnology (2023)

  17. No Access

    Article

    Improving the electrochemical performance of LiNi0.5Mn1.5O4 cathode material by a coating of manganese phosphate

    In this paper, MnPO4-coated LiNi0.5Mn1.5O4 (MP-LNMO) has been successfully synthesized using a simple liquid-phase coating method. The experimental results showed that MP-LNMO with a coating of 1 wt% displayed th...

    Junqing Yan, Mingliang Yuan, Shuai **e, Tanxin Wang… in Journal of Materials Research (2023)

  18. No Access

    Article

    Research progress of cellulose-derived carbon-based composites for microwave absorption

    As a natural biopolymer, cellulose has the advantages of good biodegradability, good thermal stability, easy processing and low cost. As a result, cellulose and its derivatives have received widespread attenti...

    Zhengguo Jiao, **hu Hu, Mingliang Ma… in Journal of Materials Science: Materials in… (2023)

  19. No Access

    Article

    A novel high-entropy alloy with an exceptional combination of soft magnetic properties and corrosion resistance

    The lack of corrosion resistance limits the application of most conventional soft magnetic materials (SMMs) in a corrosive environment, especially in seawater. Hence, enhancing the corrosion resistance of SMMs...

    Jiacheng Duan 段嘉诚, Mingliang Wang 王明亮, Rui Huang 黄瑞… in Science China Materials (2023)

  20. No Access

    Article

    Synthesis of (MgCoNiCuZn)O high-entropy oxide composites by microwave heating

    (MgCoNiCuZn)O high-entropy oxide (HEO) composites with chemically uniform single rock-salt structure were successfully synthesized thorough a microwave heating process. Heating temperatures were employed at 65...

    Yuanzheng Lou, Li Guan, Yanke Wang… in Journal of Materials Science: Materials in… (2023)

previous disabled Page of 6