Skip to main content

9 Result(s)

within Kui **a Remove this filter Engineering Remove this filter Engineering, general Remove this filter Environment, general Remove this filter

and

  1. No Access

    Article

    Research Status of High-Manganese High-Aluminum Steel and Key Points of Continuous Casting

    Fe-Mn-Al-C high-manganese and high-aluminum (high-Mn and high-Al) steel has the characteristics of high strength at room temperature and low temperature, good fatigue performance, high elongation, and good ene...

    Guo-**ng Qiu, Jia-Ning Li, Kui Chen, Guang Xu, Yong-Kun Yang, **ao-Ming Li in JOM (2024)

  2. No Access

    Article

    Grain Refinement and Mechanical Properties of Photovoltaic Frame 6063 Al Alloy with an Addition of ECAP-ed Al-5%Ti-1%B Master Alloy

    The Al-5%Ti-1%B master alloy was subjected to equal channel angular pressing (ECAP), aiming to investigate the effects of the ECAP passes and addition amounts of the Al-5%Ti-1%B master alloy on the microstruct...

    Dong Sheng Wang, Wei Wei, Kun **a Wei, Igor V. Alexandrov, Xu Long An, Dan Dan Wang… in JOM (2024)

  3. No Access

    Article

    An Efficient Dealkalization of Red Mud Through Microwave Roasting and Water Leaching

    How to obtain an efficient dealkalization process is a key issue for the resource treatment process of red mud. In this work, CaO was added to red mud and then mixed by ball milling after the mixture had been ...

    Kui Zeng, Xuejun Quan, Qibing Jiang, Zhanghao Jiang, Facheng Qiu in JOM (2022)

  4. No Access

    Article

    Tailored Fully Lamellar Microstructure of a Newly Developed Mn-Containing β-Solidifying γ-TiAl Alloys Rolled Bar

    A low-cost Mn-containing β-solidifying γ-TiAl alloys Ti-44Al-4Mn-0.8Mo-0.1B-0.1C (at.%) alloy (named as TMM alloy) was invented. Rolled bars with a diameter of 12 mm were fabricated by conventional hot rolling...

    **aobing Li, Kun Qian, Lei Shu, Mengshu Zhang, Bo Chen, Kui Liu in JOM (2022)

  5. No Access

    Article

    Fabrication and Characterization of Sr-doped Hydroxyapatite Porous Scaffold

    Strontium (Sr) is a trace metal ion that exists in natural bones. It not only regulates metabolism but also promotes osteoblast differentiation and the formation of new bones. In this study, a new method was d...

    Ke Li, Shuiyuan Li, Fanrong Ai, **chao Yan, Kui Zhou in JOM (2021)

  6. No Access

    Article

    Hydrothermal CO2-assisted Pretreatment of Wheat Straw for Hemicellulose Degradation Followed with Enzymatic Hydrolysis for Glucose Production

    Hydrothermal CO2-assisted pretreatment was carried out for selective degradation of hemicellulose in wheat straw to produce pentose and enhancement the efficiency of enzymatic hydrolysis for glucose production. T...

    Ruizhen Wang, **fang Yue, Jianchun Jiang, **g Li… in Waste and Biomass Valorization (2021)

  7. No Access

    Article

    Mining Scheme Optimization and Stope Structural Mechanic Characteristics for a Deep and Large Ore Body

    Several large ore bodies are exposed to poor environments. Thus, designing a reasonable mining scheme for the stress characteristics and stability of stope structures is essential. In this study, Fast Lagrangi...

    Kang Zhao, Qing Wang, Shuijie Gu, Ke** Zhou, Shengtang Zhu, Qiang Li, Kui Zhao in JOM (2019)

  8. Article

    Effects of oxygen content of pitch precursors on the porous texture and surface chemistry of pitch-based activated carbon fibers

    Oxidized pitches with different oxygen content were prepared using ethylene tar as a raw material by air-blowing method, then the resultant pitch-based activated carbon fibers (ACFs) were prepared through spin...

    Hanpeng Wang, Jianxiao Yang, Jun Li, Kui Shi, Xuanke Li in SN Applied Sciences (2019)

    Download PDF (1047 KB) View Article

  9. No Access

    Article

    Effects of Mold Current on Slag Skin and Heat Flow Distribution During Electroslag Remelting at Given Power Input

    A transient model including the electromagnetic field, fluid flow, and heat transfer has been developed based on the volume-of-fluid model and dynamic mesh technique. At given power input, two cases were simul...

    Jia Yu, Fubin Liu, Huabing Li, Zhouhua Jiang, Kui Chen, **n Geng in JOM (2019)