Skip to main content

previous disabled Page of 2
and
  1. No Access

    Article

    Microstructure of Batch Hot-Dip Zn-5 Wt Pct Al Coatings: Comparison of Ball-Milling Pretreatment and Conventional Pretreatment

    Instead of pickling and solvent fluxing in the conventional batch hot-dip galvanizing, ball-milling pretreatment was used to study the crystal orientation of the Q235 steel surface and the structure growth of ...

    Zhiwei Li, Shijun Zhou, Yulong Zhou, in Metallurgical and Materials Transactions A (2024)

  2. Article

    Open Access

    Black TiO2-based nanoparticles as Toll-like receptor stimulator delivery system for enhanced photothermal-immunotherapy of pancreatic cancer

    The tumor-specific immune responses, essential for removing residual lesions and preventing tumor metastases, can be stimulated by tumor-associated antigens (TAAs) released following photothermal therapy (PTT)...

    Liu Xu, Ruoyu Wu, Jia**g Ni, Lufei **, Kaiwei Xu, Yuchao Zhu in Cancer Nanotechnology (2024)

  3. No Access

    Article

    Effect of Pre-oxidation Condition on the Microstructure of a Hot-Dip Galvanized Coating on Nodular Cast Iron

    In this paper, the pre-oxidation products, surface silicon content, hot-dip galvanized layer structure and corrosion resistance of nodular cast iron pre-oxidized by sodium bicarbonate were studied by scanning ...

    Weiyu Chen, Changjun Wu, Liu Ya in Journal of Materials Engineering and Perfo… (2024)

  4. No Access

    Article

    Synergistic Effect of Lanthanum and Melt Purification on the Microstructure of Hypereutectic Al–Si Alloy

    The synergistic effect of lanthanum and melt purification on the microstructure of hypereutectic Al–Si alloy was investigated by optical microscopy, scanning electron microscopy/energy dispersive spectroscopy,...

    Yilei **g, Ya Liu, Hao** Peng in Transactions of the Indian Institute of Me… (2023)

  5. No Access

    Article

    Effect of Self-Inoculation Treatment on Microstructure and Mechanical Properties of Eutectic Al–Si Alloy

    Eutectic Al–Si alloy was self-inoculated by spheroidized Al–12.6Si alloy. The microstructure and mechanical properties of self-inoculated eutectic Al–Si alloy were observed by optical microscopy, scanning elec...

    Ze Zhu, Hongbao Li, Ya Liu, Jianhua Wang, Xu** Su in Physics of Metals and Metallography (2023)

  6. No Access

    Article

    Effects of Cu Content on the Mechanical, Degradable, and Antibacterial Properties of the As-Cast Zn-3Al-xCu Alloys

    Degradable zinc alloys are a new type of medical material that has great potentials to be used in bone implants. In this work, a series of degradable Zn-3Al-xCu (x = 0, 0.5, 1.0, and 1.5 wt.%) alloys were designe...

    Jie Zhan, **aolong Huang, Yang Yang in Journal of Materials Engineering and Perfo… (2023)

  7. No Access

    Article

    Effect of Cooling Conditions on the Solidification Microstructure and Mechanical Properties of Al–18Si Alloy

    In this paper, the effects of cooling conditions on the solidification microstructure and mechanical properties of Al–18Si alloy were studied. Results show that the cooling rate up to about 250 K/s could be ob...

    Ze Zhu, Han Zhou, Ya Liu, Changjun Wu in Transactions of the Indian Institute of Me… (2023)

  8. No Access

    Article

    Formation and fracture characteristics of friction stir lap joint of Alclad 2A12-T42 aluminum alloy at different tilt angles

    The focus of the current investigation is on how tilt angle (TA) affects the formation and fracture characteristics of friction stir lap welded in 2A12-T42 aluminum alloy. The results demonstrated that as the ...

    Zulai Huang, Shulei Sun, Jianhua Wang, Li Zhou, Ning Guo in Welding in the World (2023)

  9. No Access

    Article

    Effect of KCl–ZnCl2 Ball-Milling Fluxing on Microstructure and Corrosion of Iron Ingot Hot-Dip Zinc Coating

    In this study, scanning electron microscopy, differential scanning calorimetry, X-ray photoelectron spectroscopy, and electrochemical workstation were used to study the effect of KCl–ZnCl2 ball-milling fluxing on...

    Zhiwei Li, Hao** Peng, Aijun **e in Metallurgical and Materials Transactions A (2023)

  10. No Access

    Article

    Segregation of Si and Mg at Fe(110)/Al(110) Interface

    The interface structure and electronic properties of Fe(110)/Al(110) are investigated by the first-principles plane-wave pseudopotential method. The interface segregation position of Si and Mg is determined, a...

    Hong** Wang 王洪金, Xu** Su 苏旭** in Journal of Wuhan University of Technology-… (2023)

  11. No Access

    Article

    The Influence of Al on the Surface Properties of the Hot-dip Galvanized Melt

    Wettability of Zn-Al alloy melt on the pure iron substrate at 450 °C was studied. The effect of Al content (Zn, Zn-1Al, Zn-2Al, Zn-3Al, Zn-4Al, and Zn-5Al) on the wetting behavior and interfacial reaction was ...

    Zhiwei Li **智伟, Ruiwen Ruan, in Journal of Wuhan University of Technology-… (2022)

  12. No Access

    Article

    Effect of Surface Micromorphology and Roughness of Iron Ingot on Microstructures of Hot-Dip Galvanized Coating

    This study uses ball milling instead of pickling pretreatment to investigate the effect of the surface micromorphology and roughness of the iron ingot on microstructures of the hot-dip galvanized coating. The ...

    Zhiwei Li, Hao** Peng, Ya Liu in Transactions of the Indian Institute of Me… (2022)

  13. No Access

    Article

    Preparation of silver nanoparticles with ionic liquid-modified carbon dots: from mechanism to the application in H2O2 sensing

    There has been growing interest in preparing silver nanoparticles (AgNPs) under mild conditions in short time and using AgNPs to detect hydrogen peroxide. Here, we report the facile preparation of AgNPs by co-...

    Quanxing Mao, **aolei Kong, E Shuang, Jianhua Wang in Journal of Materials Science (2020)

  14. No Access

    Article

    Effect of Complex Modification on Microstructure and Mechanical Properties of Hypoeutectic Al–Si

    Hypoeutectic Al–Si alloy was modified by Al–5Ti and Al–3P alloys. The microstructure, fracture morphology, and mechanical properties of the alloys were characterized using optical microscopy, scanning electron...

    Jianhua Wang, Yaling Liu, Jiaqing Zhu in Metallography, Microstructure, and Analysis (2019)

  15. No Access

    Article

    Effect of Mg on Microstructure and Growth Kinetics of Zn-22.3Al-1.1Si Coating

    The effects of Mg on the microstructure and growth kinetics of the hot-dip Zn-22.3Al-1.1Si-x Mg (x = 0, 0.2, 0.4, and 0.6) coatings were investigated in detail. Scanning electron microscopy with energy dispersive...

    Hao Tu 涂浩, Dasheng Wei, Shengjie Zhou in Journal of Wuhan University of Technology-… (2019)

  16. No Access

    Article

    Self-assembled nanoparticles for cellular delivery of peptide nucleic acid using amphiphilic N,N,N-trimethyl-O-alkyl chitosan derivatives

    Peptide nucleic acid (PNA) holds enormous potentials as antisense/antigenic drug due to its specific binding ability and biostability with DNA or RNA. However, the poor cellular delivery is the key obstacle in...

    Chundong Liu, Jianhua Wang, Sheng Huang in Journal of Materials Science: Materials in… (2018)

  17. No Access

    Article

    Effect of spheroidization of eutectic Si on mechanical properties of eutectic Al–Si alloys

    Al–12.6Si was annealed at both 500 and 560 °C for different lengths of time in this study. Additionally, the effects of annealing treatment on the spheroidization of eutectic Si and the mechanical properties o...

    Jianhua Wang, Jiaqing Zhu, Ya Liu, Hao** Peng, Xu** Su in Journal of Materials Research (2018)

  18. No Access

    Article

    Probing the role of metal cations on the aggregation behavior of amyloid β-peptide at a single molecule level by AFM

    With the development of nanotechnology, understanding of intermolecular interactions on a single molecule level by atomic force spectroscopy (AFM) has played an important role in molecular biology and biomedic...

    Yang **e, Jianhua Wang, Chundong Liu in Journal of Nanoparticle Research (2016)

  19. No Access

    Article

    Phase Equilibria of the Sn–Ni–V System: The 980°C Isothermal Section and the Sn-Rich Corner at 600°C and 300°C

    Ternary Sn–Ni–V alloys were prepared and annealed at 980°C, 600°C, and 300°C for 15, 60 and 60 days, respectively. The annealed alloys were metallographically examined and the equilibrium phases formed were id...

    Changjun Wu, Xu** Su, Hao** Peng, Ya Liu, Hao Tu in Journal of Electronic Materials (2015)

  20. No Access

    Article

    Phase Equilibria of the Sn-Ni-V System at 800°C

    Ternary Sn-Ni-V alloys were prepared and annealed at 800°C for 60 days. The annealed alloys were metallographically examined, and the equilibrium phases formed were identified on the basis of compositional det...

    Changjun Wu, Xu** Su, Jianhua Wang, Ya Liu, Hao Tu in Journal of Electronic Materials (2014)

previous disabled Page of 2