9 Result(s)
-
Chapter and Conference Paper
Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” Based Composites Produced by Hot Forging Diffusion Process
Within the framework of the common research project, the mechanical properties and fatigue behaviour of recycled thin sheet Ti-Al-based composites reinforced with atomized scrap aluminium (AA7075) and Nb eleme...
-
Chapter and Conference Paper
Development of Recycled Aluminium (AA7075 + AA1050)-Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sintering + Forging
A new recycled hybrid composite has been designed by using a special do** process and a combined method, “sintering + forging” of recycled “AA 7075 + AA1050” and basically used rice husk as a fine powder and...
-
Chapter and Conference Paper
Design of Recycled “A356-A7075” Matrix Composites Reinforced with “Nb2Al-Zr” Produced by Sinter Forging
In this research, the mechanical properties of recycled aluminum (A356-A7075)-based composites reinforced with Nb2Al-ZrO2-TiAl have been evaluated. Different amounts of Nb2Al doped with ZrO2 were mixed with atomi...
-
Chapter and Conference Paper
Development of Recycled Alumix431-Based Composites Reinforced with TiB2, TiC, and B4C Fine Ceramic Powders for Aircraft Applications Produced by a Combined Method: Sintering + Forging
In this chapter, the microstructural formation and static/cyclic compression behavior of recycled Alumix (aluminum alloy) matrix hybrid composites reinforced with TiB2, TiC, and B4C are studied. It is aimed as an...
-
Chapter and Conference Paper
Development of Ni-Al-Based Composites Reinforced with Recycled AA7075 + AA1050 and Ceramics Produced by the Sintering + Forging Process
In this study, the microstructural formation and static/cyclic compression behavior of “Ni-Al+AA7075+AA1050”-based composites reinforced with ceramics (TiC-TiB2) have been evaluated. It is aimed at creating a new...
-
Article
Open AccessConductive 3D nano-biohybrid systems based on densified carbon nanotube forests and living cells
Conductive biohybrid cell-material systems have applications in bioelectronics and biorobotics. To date, conductive scaffolds are limited to those with low electrical conductivity or 2D sheets. Here, 3D biohyb...
-
Chapter and Conference Paper
Development of Ni-Al/Nb2Al/ZrO2-Based Composites for Aircraft Engine Applications Produced by a Combined Method: Sintering + Forging
In this study, the microstructural formation and static/dynamic compression behaviour of the recycled Ni-Al/Nb2Al/ZrO2 matrix-hybrid composites reinforced with Nb and ZrO2 will be studied. It is intended to be an...
-
Chapter and Conference Paper
Toughening Mechanism of Silicon Whiskers and Alumina Fibres (γ-Al2O3) Reinforced Ni-Al-Cu Matrix Composites Through “Sintering + Forging”
In this study, the microstructural formation and static/dynamic compression behaviour of recycled Ni-Al-Cu matrix hybrid composites reinforced with silicon whiskers and alumina (Al2O3) fibres will be studied. It ...
-
Chapter and Conference Paper
Recycled Ti-Al-Cu Matrix Composites Reinforced with Silicon Whiskers and γ-Alumina (Al2O3) Fibres Through Sintering + Forging
In this study, the microstructural formation and static/dynamic compression behaviour of the recycled Ti-Al-Cu matrix hybrid composites reinforced with silicon whiskers and alumina (Al2O3) fibres are examined. It...
