-
Article
Specific Features of the Fracture of High-Chromium Cast Irons Under Abrasive Wear
It is shown that the fracture of high-chromium cast irons in dry and wet abrasive media depends on their chemical composition, structures, distribution of chromium in the metal base, properties of the abrasive...
-
Article
Influence of intermetallic inclusions on the endurance of aluminum alloys
The results of experimental and theoretical investigations of the influence of intermetallic inclusions on the fatigue limit of secondary aluminum alloys are presented. We study AK8M3 secondary silumin. The in...
-
Article
Spongy titanium alloyed with oxygen for the production of titanium alloys
We study the influence of alloying of spongy titanium with oxygen on the structure, mechanisms of fracture, and mechanical properties of titanium. It is shown that, within the range of concentrations 0.05–0.30...
-
Article
The effect of copper on the structure and properties of graphitized steel
The effect of copper on the structure, mechanical properties, heat resistance and thermal conductivity of graphitized steel is investigated.
-
Article
Effect of copper on the cyclic crack resistance and heat resistance of graphitic steels
We study the effect of copper content (0.05–3.45 mass %) on the structure of the matrix and graphitic phase of graphitic steels (GS) annealed for globular perlite. It has been established that the effect of co...
-
Article
Effect of copper on the cyclic crack resistance and heat resistance of graphitic steels
We study the effect of copper content (0.05–3.45 mass %) on the structure of the matrix and graphitic phase of graphitic steels (GS) annealed for globular perlite. It has been established that the effect of co...
-
Article
Influence of Phosphide Eutectics on the Wear Resistance of High-Strength Cast Irons
-
Article
Enhancement of the Cyclic Crack Resistance of Graphitic Steels
We study the influence of silicon (1.0–2.5%), copper (0.5–1.5%), and aluminum (0.05–0.25%) on the structure of the matrix and graphitic phase of annealed graphitic steels (GS) containing 1.6% of carbon. We hav...
-
Article
Silicocarbide Phase in Wear-Resistant Alloys
This work is devoted to the problems of formation of a silicocarbide hardening phase in rapidly cooled alloys of the Fe – C – Cr – B – Si system. The presence of this phase in the alloys is proved by means of ...
-
Article
Cyclic Crack Resistance of Grey and High-Strength Cast Irons with Increased Phosphorus Content
We investigated the influence of phosphorus (0.02–0.76%) on the microstructure, short-term strength, cyclic crack resistance characteristics, and micromechanism of fatigue fracture of grey and high-strength ca...
-
Article
Effect of phosphide eutectic on the properties of a cast iron alloy
The most technologically advanced material for valve seats of internal-combustion engines are the phosphorus-alloyed cast irons strengthened by a reinforcing phase consisting of the phosphide eutectic and ceme...
-
Article
Failure of cast iron in thermocyclic loading and in molten glass mass
-
Article
Improving the service properties of cast iron glass molds
-
Article
Influence of the shape of graphite inclusions on the stress concentration and mechanical properties of cast iron
-
Article
Corrosion fracture micromechanism of cast steel
-
Article
Micromechanism of fracture of cast irons
-
Article
Ways of improving the service life of glass molds
-
Article
Cooling glass molds with running water
-
Article
Quick method of determining the cold resistance of cast steel
-
Article
Dependence of electrochemical heterogeneity of steel on the degree of contamination by nonmetallic inclusions