![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
-
Article
Programming an efficient technique for designing smart C-doped MIC with dual self-protection for information and high-energy
Constructing self-protected metastable intermolecular composites (MICs) enables the regulation of microstructures towards boosting controllable detonation performance, and also prevents information leakage, wh...
-
Article
Microwave excited hyperthermy and catalysis of heterostructured Au/Cu–BTA for effective bacteria killing by accelerating charge separation
Deep tissue infections caused by pathogenic bacteria seriously threat the lives of patients. In this study, a smart heterostructured Au/Cu–BTA (BTA = 1,2,4,5-benzenetetramine) with microwave (MW) response is s...
-
Article
Open AccessStrain-mediated phase crossover in Ruddlesden–Popper nickelates
Recent progress on the signatures of pressure-induced high-temperature superconductivity in Ruddlesden–Popper (RP) nickelates (Lan+1NinO3n+1) has attracted growing interest in both theoretical calculations and ex...
-
Article
Arranging cation mixing and charge compensation of TiNb2O7 with W6+ do** for high lithium storage performance
TiNb2O7 is an advanced anode material for high-energy density lithium-ion batteries (LIBs) due to its considerable specific capacity and satisfactory safety. However, its rate capability is limited by its poor io...
-
Article
High-throughput screening and machine learning for the efficient growth of high-quality single-wall carbon nanotubes
It has been a great challenge to optimize the growth conditions toward structure-controlled growth of single-wall carbon nanotubes (SWCNTs). Here, a high-throughput method combined with machine learning is rep...
-
Article
Photoluminescence properties and energy transfer of novel orange–red emitting phosphors: Ba3Bi2(PO4)4: Sm3+, Eu3+ for white light-emitting diodes
Sm3+, Eu3+ co-coped Ba3Bi2(PO4)4 phosphors, as potential phosphors for white light-emitting diode applications, were synthesized through the solid-state reaction method for the first time. The crystal structure, ...
-
Article
Microstructure and mechanical properties of TC4 joints brazed with Ti–Zr–Cu–Sn amorphous filler alloy
The Ti51.44Zr16.26Cu30Sn2.3 (at%) amorphous filler alloy in a ribbon form was prepared by melt spinning. The Ti–6Al–4V alloy was brazed in vacuum furnace by using the Ti51.44Zr16.26Cu30Sn2.3 amorphous filler allo...
-
Article
Effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 high-entropy alloy coating fabricated by magnetron sputtering
The effects of substrate temperature and deposition time on the morphology and corrosion resistance of FeCoCrNiMo0.3 coating fabricated by magnetron sputtering were investigated by scanning electron microscopy an...
-
Article
Investigation of the stable and the metastable liquidus miscibility gaps in Fe–Sn and Fe–Cu binary systems
Two kinds of experimental methods were tried in the present work: (i) the powder metallurgy method combined with differential thermal analysis (DTA) to determine the metastable liquidus miscibility gap for a F...
-
Article
Preparation of paraffin-based phase-change microcapsules and application in geopolymer coating
A type of paraffin phase-change microcapsule for thermal insulation of exterior walls was prepared by in situ polymerization of low-softening-point paraffin (46°C) as core material and acrylic copolymer as she...
-
Article
Erratum to: Thermal stability, mechanical properties and corrosion behavior of a Mg–Cu–Ag–Gd metallic glass with Nb addition
-
Article
Thermal stability, mechanical properties and corrosion behavior of a Mg–Cu–Ag–Gd metallic glass with Nd addition
By the minor addition of Nb to a Mg–Cu–Ag–Gd alloy, a Mg–Cu–Ag–Gd–Nb bulk metallic glass (BMG) with improved thermal stability and corrosion resistance as well as good mechanical properties was developed. Mg54Cu2...
-
Article
Effect of Post-weld Heat Treatment on the Microstructure and Corrosion Resistance of Deposited Metal of a High-Chromium Nickel-Based Alloy
The evolution of Cr23C6 carbides in the deposited metal (DM) of a high-chromium nickel-based alloy was investigated after the post-weld heat treatment (PWHT) at 650, 750, 850, and 950 °C, respectively. With the i...
-
Article
A New Understanding of Stress Corrosion Cracking Mechanism of X80 Pipeline Steel at Passive Potential in High-pH Solutions
Susceptibilities to stress corrosion cracking (SCC) of X80 pipeline steel in relatively concentrated carbonate/bicarbonate solutions with different chloride ion concentrations or pH value at a passive potentia...
-
Article
As-cast microstructures and solidification paths of the Nb–Si–Ti ternary alloys in Nb5Si3–Ti5Si3 region
The as-cast microstructures and solidification paths of the Nb–Si–Ti ternary alloys in the Nb5Si3–Ti5Si3 region were investigated. Since there exist some isomorphous compounds in the Nb5Si3–Ti5Si3 region, such as...
-
Article
Thermodynamic modeling of the Ge-La binary system
The Ge-La binary system was critically assessed by means of the calculation of phase diagram (CALPHAD) technique. The associate model was used for the liquid phase containing the constituent species Ge, La, Ge3La