Skip to main content

and
  1. Chapter and Conference Paper

    Designing Waterborne Protective Coatings Through Manipulating the Nanostructure of Acrylic-Based Nanocomposites

    Waterborne coatings with intended functionalities have been designed by manipulating acrylic-based nanocomposites with different nanostructures. Taking advantage of the favorable structure of acrylic copolymer...

    S. Ji, H. Gui, G. Guan, M. Zhou, Q. Guo in Nanotechnology in Construction for Circula… (2023)

  2. Chapter and Conference Paper

    Thermal Transfer Effects of CRTS II Slab Track Under Various Meteorological Conditions

    With the evolution of climate change, the thermal transfer effects of ballastless track in high-speed railways under complicated environmental conditions becomes increasingly important, governed by a number of...

    R. Zhou, W. H. Yuan, Y. D. Du, H. L. Liu in Nanotechnology in Construction for Circula… (2023)

  3. Chapter and Conference Paper

    Life Cycle Assessment of the Environmental Impacts of Virgin Concrete Replacement by CO2 Concrete in a Residential Building

    Concrete is one of the most consumed materials in construction, with 25 billion tons produced globally per year.

    M. Ma, Y. Zhou, V. W. Y. Tam, K. N. Le in Nanotechnology in Construction for Circula… (2023)

  4. Chapter and Conference Paper

    Nonlinear Wind-Induced Vibration Behaviors of Multi-tower Suspension Bridges Under Strong Wind Conditions

    The aerodynamic characteristics of a multispan suspension bridge differ from those of a two-span suspension bridge. In this study we investigated the nonlinear aerodynamic characteristics of the Maanshan Bridg...

    R. Zhou, Y. J. Ge, Y. Yang, Y. D. Du in Nanotechnology in Construction for Circula… (2023)

  5. No Access

    Chapter and Conference Paper

    High Precision Machining of Micro-pyramid Array of Electroless Ni-P Plating Based on Relative Tool Sharpness Effect

    Relative tool sharpness (RTS) is identified as the ratio of undeformed chip thickness to tool cutting edge radius, which plays an important role in affecting the micro- or nano-machining process. This paper st...

    Qian Yu, Tianfeng Zhou, Yao Hu, Jia Zhou in Proceedings of the 7th International Confe… (2022)

  6. No Access

    Chapter and Conference Paper

    Mechanical, Thermal Properties and Ablation Resistance of Unsaturated Polyester Inhibitor by α-Type Zirconium Phosphate and Multi-walled Carbon Nanotubes

    Unsaturated polyesters (UP) as solid propellant inhibitor have been widely used in weapons and equipments, however, with the gradual improvement of solid propellant properties, higher and higher performance re...

    Lisheng Zhou, Guohui Chen, Yang Li in 2021 International Conference on Developme… (2022)

  7. No Access

    Chapter and Conference Paper

    Effect of Nano-copper-Ultrafine Carbon Composite on Thermal Decomposition of CL-20

    Ultrathin carbon loaded With nano-copper (Cu-C composite) was mixed With Hexanitrohexaazazo wurtane (CL-20); Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to observe t...

    Wen-**g Zhou, Juan Zhao, Yan-li Ning in 2021 International Conference on Developme… (2022)

  8. No Access

    Chapter and Conference Paper

    Highly Flexible PU Electrospun Membrane Decorated with CNTs and AgNPs for EMI Shielding Application

    By virtue of severe electromagnetic wave pollution in modern society, it is imperative to develop the high-performance devices for effective electromagnetic interference (EMI) shielding. In this work, a novel,...

    Guoxi Luo, Ke Chen, Min Li, Qiankun Zhang in Proceedings of the 7th International Confe… (2022)

  9. No Access

    Chapter and Conference Paper

    Effect of Impact Fracture of RDX-Based High-Energy Gun Propellant on the Combustion Properties

    To study the influence of impact fracture on the combustion properties of gun propellants, a series of impact tests were carried out on RDX-based high-energy gun propellants by a drop** hammer impact device....

    **g Zhou, Ding Wei, Da Li in 2021 International Conference on Developme… (2022)

  10. No Access

    Chapter and Conference Paper

    Temperature and Thickness Dependent Mechanical Properties of Ti/Ni Multilayer Thin Films

    Strong temperature and thickness dependent mechanical properties of Ti/Ni multilayer thin films have been observed with layer thickness from 200 nm to 6 nm and annealing temperature from room temperature to 50...

    Zhou Yang, Junlan Wang in Micro and Nanomechanics, Volume 5 (2017)

  11. No Access

    Chapter and Conference Paper

    Dynamic Fracture Analysis of Semi-circular Bending (SCB) Specimen by the Optical Method of Caustics

    Semi-Circular Bending (SCB) specimens are widely used in fracture analysis of geo materials due to their simple geometry and loading condition, and also the ability of introducing complete combinations of mode...

    Guiyun Gao, Jie Zhou, Zheng Li in Dynamic Behavior of Materials, Volume 1 (2014)

  12. No Access

    Chapter and Conference Paper

    Heterogeneous Structures with Negative Effective Mass

    Dynamic mass of a composite is different from the gravitational one; careful placement of mass elements in the composite may result in resonance under wave loading. This resonant effect will induce negative ef...

    Shanshan Yao, **aoming Zhou, Gengkai Hu in IUTAM Symposium on Surface Effects in the … (2013)

  13. No Access

    Chapter and Conference Paper

    Size and Surface Effects on Stress-Diffusion Coupling in Silicon Nanowire Electrodes

    The development of diffusion-induced stresses (DIS) in amorphous alloy nanowire-based Li-ion battery electrodes is analyzed using a finite deformation model with full diffusion/stress coupling. The analyses re...

    Y. F. Gao, M. Zhou in IUTAM Symposium on Surface Effects in the … (2013)

  14. No Access

    Chapter and Conference Paper

    New Insight into Pile-up in Thin Film Indentation

    A new method of accurately and reliably extract the actual Young’s modulus of a thin film on a substrate has been developed. The method is referred to as the discontinuous elastic interface transfer model. The...

    B. C. Prorok, B. Frye, B. Zhou, K. Schwieker in MEMS and Nanotechnology, Volume 4 (2011)

  15. No Access

    Chapter and Conference Paper

    Advances in Thin Film Indentation

    A new method to accurately and reliably extract the actual Young’s modulus of a thin film on a substrate by indentation was developed. The method involved modifying the discontinuous elastic interface transfer...

    B. Zhou, K. Schwieker, B. Frye, B. C. Prorok in MEMS and Nanotechnology, Volume 4 (2011)

  16. No Access

    Chapter and Conference Paper

    Research on Large-size Pre-hardened Mould Blocks of Plastic Mould Steels

    Plastic mould steels are the most versatile alloy steels whose consumption amount is the largest among mould and die steels. Pre-hardened plastic mould blocks are mainly used for manufacturing large moulds of ...

    Dangshen Ma, Lin Wang, Aijun Kang, Qiang Guo, Yongwei Wang, Zaizhi Chen in Advanced Steels (2011)

  17. No Access

    Chapter and Conference Paper

    Visual Feedback Control of a Micro Lathe

    Micromachining progresses rapidly in recent years. In this research, a micro lathe which is installable and operational inside SEM vacuum chamber has been designed and developed. As a first step, visually guid...

    Hirotaka Ojima, Katsuhiro Saito, Libo Zhou in Towards Synthesis of Micro-/Nano-systems (2007)

  18. No Access

    Chapter and Conference Paper

    Path Control Scheme for Vision Guided Micro Manipulation System

    Cloning is new and growing industry. However, the cell manipulation like enucleating and injection are manually done by skilled operators with the aid of a microscope, and thus tedious and time consuming. Thus...

    Hiroyuki Asano, Zhougjun Qiu, Libo Zhou in Towards Synthesis of Micro-/Nano-systems (2007)

  19. No Access

    Chapter and Conference Paper

    Study on Subsurface Damage Generated in Ground Si Wafer

    In this paper, we study and evaluate the subsurface damage of the ground wafers to understand the effect of residual stress on the wafer deflection. The experimental results show that two indexes of depth of t...

    Bahman Soltani Hosseini, Libo Zhou in Towards Synthesis of Micro-/Nano-systems (2007)

  20. No Access

    Chapter and Conference Paper

    Shape Memory Effect and Pseudoelasticity in Cu Nanowires

    We report the discovery of a novel pseudoelastic behavior in single-crystalline Cu nanowires through atomistic simulations. Under tensile loading and unloading, the nanowires are capable of recovering elongati...

    Wuwei Liang, Min Zhou in IUTAM Symposium on Mechanical Behavior and… (2007)