140 Result(s)
within
Chapter
Pan **g
Characterization and Evaluation of Materials
-
Chapter and Conference Paper
In Situ Investigation of Iron Ore Stock Pile During Its Stacking and Reclaiming Process
The physical properties of a of iron ore were in situ investigated during its stacking . The total weight of was around 200,000 tons. The stacking lasted for 480 h. The tested physical properties includ...
-
Chapter and Conference Paper
Particle Size Matching Mechanism of Blending Ore and Solid Fuel in Sintering Process
The particle size of imported iron ores has gradually become bigger, which is adverse to mineralization and reaction process. At present, only imported iron ore fines are used in plant. And it is hard to c...
-
Chapter and Conference Paper
Effect of Mg with Different Combination Form of Mg–Ca in MgO-Bearing Fluxes on Fluidity of Liquid Phase in Sintering Process
MgO was considered to be an indispensable mineral composition of the modern process. reflecting the scope of effective bonding makes a clear distinction among in the process. Mg–Ca combination forms of...
-
Chapter and Conference Paper
Effects of Basicity, FeO, and TiO2 on Phase Transformation and Viscosity of TiO2-Bearing Primary Slag in Blast Furnace
Characteristics and behaviors of are of central importance for the cohesive zone. This work focuses on phase transformation and of CaO–SiO2–Al2O3–MgO–FeO–TiO2 slag (TiO2 = 4~16 wt%, CaO/SiO2 = 1.1 ~ 1.5, FeO ...
-
Chapter
Advanced Transmission X-ray Microscopy for Energy Materials and Devices
Transmission X-ray microscopy (TXM) can acquire a full-field projection image with spatial resolution of tens of nanometers using one-time exposure. Thus, it is easy to combine this imaging method with compute...
-
Chapter and Conference Paper
Novel Texture Controlling of Mg Alloys
-
Chapter and Conference Paper
Experimental Study of CO2 for Vanadium Extraction by Segmented Combined Blowing in Converter
In order to further explore the application of CO2 in in converter, the initial injection was 1300 and 1320 °C, and the CO2 ratio changed with the injection time of 1, 3, 6, and 10 min when the initial prop...
-
Chapter and Conference Paper
Effect of CO2 on Vanadium Extraction and Thermal Effect in Top-Bottom Combined Blowing Converter
In order to better study the application of CO2 in the process of a converter, the simulation experiment of combined injection was carried out under laboratory conditions by changing the of CO2 and O2 at th...
-
Chapter and Conference Paper
Use of Magnetic Susceptibility Measurement for Analysis of Self-Organized Magnetic Nanoparticles in Biological Systems
Magnetic susceptibility (MS) measurements for analysis of superparamagnetic iron oxide nanoparticles (SPIONs) in various biological systems were applied. The MS measurements by the Faraday method were carried ...
-
Chapter and Conference Paper
Effect of Water Flow Distribution on the Performance of Aluminium Small-Form Ingot Chains
Small-form lines are widely used to produce pure and foundry alloys due to their productivity and the convenience of small-form ingots for remelting and handling operations. The throughput of is typicall...
-
Chapter and Conference Paper
Highly Enhanced Cross Tensile Strength of the Resistance Spot Welded Medium Manganese Steel by Optimized Post-heating Pulse
The in the evolution and (CTS) variation of the resistance spot welded 7Mn (MMS) was studied. The results showed that the in the nugget fabricated by 4.0 kA was , yet the one by 4.5 kA was . Acco...
-
Chapter and Conference Paper
How to Measure High-Temperature Heat Capacity Reliably by Drop Calorimetry
High-temperature heat capacity measurements can be a very powerful means to investigate and understand the properties of materials, and high-temperature heat capacity values are also the key thermodynamic data...
-
Chapter and Conference Paper
Study on the Interaction Process Between Mold Flux and TiN/TiO2 by Sessile Drop Method
The interfacial property is the key factor to determine the solubility and of solid inclusions by in the process. In this study, the interfacial interactions between droplet and , substrates were in...
-
Chapter and Conference Paper
Nanotreating High-Zinc Al–Zn–Mg–Cu Alloy by TiC Nanoparticles
High-zinc Al–Zn–Mg–Cu alloys offer the highest strength among all mostly due to high-volume after heat treatment. However, the high zinc content makes the alloys more sensitive to hot cracking and stress c...
-
Chapter and Conference Paper
High Strength Nanotreated Filler Material for TIG Welding of AA6061
Incorporating structural parts into functional assemblies using a variety of techniques, such as bolting, riveting, brazing, and welding is important for today’s industry and society. When joining AA6061 by Tu...
-
Chapter and Conference Paper
Preparation of Expanded Slag Ball with Blast Furnace Slag by Rotary Cup
Molten (BF) is a kind of liquid resource with abundant waste heat which has not been recycled in the and industry. At present, the treatment of is usually water quenching and air cooling accumulati...
-
Chapter and Conference Paper
A Review of Research on Alumina Extraction from High-Alumina Fly Ash and a New Method for Preparing Alumina by Electrotransformation
When bauxite and resources are limited, becomes a potential resource. The of high value-added elements in is of great significance to resource circulation. In order to solve the difficult of valuab...
-
Chapter and Conference Paper
Preparation of Na4V2O7 Powder by Solid-State Reaction
As one of the critical intermediate compounds of the sodium roasting converter slag, sodium pyrovanadate ( powder was synthesized by solid-state reaction using NaCO3 and V2O5 as raw materials in this study. The ...
-
Chapter and Conference Paper
Leaching of Platinum Group Metals from Automobile Spent Catalyst
for recovering using oxidizing . is regarded as oxidant and hydrochloric acid as reagent. The experimental results show that the best conditions are as follows: the concentration of hydrochlori...
-
Chapter and Conference Paper
Utilization of Ground Sinter Feed for Oxidized Pellet Production and Its Effect on Pellet Consolidation and Metallurgical Properties
With a growing demand for high-grade feeds as well as a considerable increase in ore price, using cost-effective and high-grade sinter feeds for oxidized pellets production becomes more attractive. In this p...
