Skip to main content

88 Result(s)

within Article Remove this filter Zhong** Yang Remove this filter Materials Science Remove this filter

previous disabled Page of 5
and

  1. No Access

    Article

    Effect of Temperature and Grain Boundary on Void Evolution in Irradiated Copper: A Phase-Field Study

    The continued existence of high-energy radiation in nuclear reactors at high temperatures results in the formation of radiation-induced voids, which will further lead to inevitable swellings of polycrystalline...

    Qionghuan Zeng, Yiming Chen, Zhongsheng Yang… in Acta Metallurgica Sinica (English Letters) (2024)

  2. No Access

    Article

    Pressure-driven metallization with significant changes of structural and photoelectric properties in two-dimensional EuSbTe3

    Two-dimensional materials are widely considered to be highly promising for the development of photodetectors. To improve the performance of these devices, researchers often employ techniques such as defect eng...

    Zhi-Kai Zhu, Zhong-Yang Li, Zhen Qin, Yi-Ming Wang, Dong Wang, **ao-Hui Zeng… in Rare Metals (2024)

  3. No Access

    Article

    Versatile graphene/polyelectrolyte aqueous dispersion for fiber-based wearable sensors and electroluminescent devices

    Conductive dispersion is a crucial building block for obtaining conductive fibers/textiles used in wearable sensing, energy supply, and flexible display devices. However, despite the graphene’s stable chemical...

    Zhenyu Miao 缪振宇, Rouhui Yu 余柔会, **aowen Bai 白晓文… in Science China Materials (2024)

  4. No Access

    Article

    Study on Galvanic Corrosion Behavior of AH36 Steel and TC4 Alloy Processed by Plasma Electrolytic Oxidation

    The plasma electrolytic oxidation (PEO) technology was used to prepare ceramic coating on the surface of titanium alloy to prevent the galvanic corrosion of AH36/TC4(PEO). The results showed that after PEO tre...

    **n Li, Qiaoqin Guo, Huishan **, Mingxu Li… in Journal of Materials Engineering and Perfo… (2024)

  5. No Access

    Article

    Effects of Micro-arc Oxidation/Multi-arc Ion Plating Composite Treatment on Microstructure and Properties of TC4 Titanium Alloy

    TC4 titanium alloy was treated by micro-arc oxidation (MAO) technology, and then CrN coating was prepared on the surface of MAO coating by multi-arc ion plating (MAIP) technology to form MAO/CrN composite film...

    Jihui Chen, Qiaoqin Guo, Zhong Yang… in Journal of Materials Engineering and Perfo… (2024)

  6. No Access

    Article

    Influence of Sintering Process Parameters on Properties and Dimensional Accuracy of MIM17-4PH Stainless Steel

    17-4PH stainless steel has high strength and corrosion resistance and is widely used in mechanical engineering, aerospace and medical fields. Due to the difficulty of traditional processing, it is mostly prepa...

    Tuoyang Wang, Xuyun Qiao, Duxin Li… in Transactions of the Indian Institute of Me… (2024)

  7. No Access

    Article

    Study of Different Melt Flow Index of Polyformaldehyde on Metal Injection Molding 17-4PH Stainless Steel

    In metal injection molding, the fluidity of the polyformaldehyde (POM)-based binder is poor, which causes the appearance of defects such as insufficient injection and wrinkles, thus reducing the dimensional ac...

    Bin Wang, XuYun Qiao, Zheng Huang… in Transactions of the Indian Institute of Me… (2023)

  8. No Access

    Article

    Enhancing the Yield Strength of Casting Eutectic High-Entropy Alloys via Coherent Precipitates

    Eutectic high-entropy alloys (EHEAs) have shown good as-cast tensile strength and ductility due to the combination of soft and hard phases. However, the yield strengths of casting EHEAs are less competitive. W...

    **n Liu, Zhongsheng Yang, Dingcong Cui… in Metallurgical and Materials Transactions A (2023)

  9. No Access

    Article

    An Investigation into the Mechanisms of B2-NiAl in the Thermal Conductivity and Mechanical Properties of Light Duplex Steel

    In this work, the microstructure, mechanical properties and thermal conductivity of the xNiAl/Fe−20Cr-15Ni-6Al-2Mo (x = 0, 10, 20, 30 wt.%) prepared by mechanical alloying and vacuum hot-pressing sintering wer...

    Naqing Lei, Ya** Bai, Jian** Li… in Journal of Materials Engineering and Perfo… (2023)

  10. Article

    Open Access

    Switchable photothermal conversion efficiency for reprogrammable actuation

    Reprogrammable soft matter brings flexibility to soft robots so that they can display various motions, which is flourishing in soft robotics. However, the reprogramming of photoresponsive materials used in sof...

    Yongcheng He, Haojun Liu, Jiajia Luo, Nuo Li, Lihua Li… in npj Flexible Electronics (2023)

    Download PDF (5239 KB) View Article

  11. No Access

    Article

    Effect of N2/Ar Ratio on Microstructure and Tribological Property of Arc Plasma-Assisted Nitrided 40CrNiMoA Steel

    40CrNiMoA steel was nitrided by arc plasma-assisted nitriding (PAN) process at 430 °C, 1 Pa for 3 h with different N2/Ar ratios. Their structures, micrographs, microhardness profiles and tribological properties w...

    Ning Zhang, Zhongyi Yang, Hongtao Li… in Transactions of the Indian Institute of Me… (2023)

  12. No Access

    Article

    Growth Behavior and Wear Resistance of PEO Coatings in Bipolar Mode

    Plasma electrolytic oxidation (PEO) coatings were prepared using a pulsed bipolar power supply to investigate the effects of different cathodic currents on the growth mechanism of PEO coatings on 6061 aluminum...

    Chaolang Qian, Bo Chen, Hongtao Li, Rui Shi… in Transactions of the Indian Institute of Me… (2023)

  13. No Access

    Article

    Mechanical and Tribological Behavior of Branched Polyethyleneimine/Polyacrylic Acid Coatings on Ti6Al4V Substrate

    This study investigated the mechanical and tribological properties of branched polyethyleneimine/polyacrylic acid (bPEI/PAA) coatings. (bPEI/PAA) coatings were prepared on Ti6Al4V substrate using layer-by-laye...

    Yaling Deng, Yu Xu, **ngya Ni, Wencheng LiYu… in Journal of Materials Engineering and Perfo… (2023)

  14. No Access

    Article

    Investigation of Ti Content on Thermal Fatigue Behavior of Fe-25Mn-9Al-8Ni-1C Alloy

    Fe-25Mn-9Al-8Ni-1C-xTi (x = 0, 0.1, 0.2, 0.3, 0.4 wt.%) alloy was prepared by vacuum arc melting method, and the corresponding microstructure, tensile properties and thermal fatigue properties were studied. The r...

    Fan Guo, Ya** Bai, Keke Tian, Zhong Yang… in Journal of Materials Engineering and Perfo… (2023)

  15. No Access

    Article

    Preparation and properties of W/O emulsion bacteriostatic microcapsules loaded with KDF

    Potassium diformate (KDF) has broad prospects in replacing common antibiotics in animal feed; however, the utilization rate of KDF in the animal intestine is low. Therefore, it is necessary to construct a drug...

    **aoNan Zhang, Zhongxin Yang, Wenqin Xu, **ng Li… in Journal of Materials Research (2023)

  16. Article

    Enhancing bioactivity and stability of polymer-based material-tissue interface through coupling multiscale interfacial interactions with atomic-thin TiO2 nanosheets

    Stable and bioactive material—tissue interface (MTF) basically determines the clinical applications of biomaterials in wound healing, sustained drug release, and tissue engineering. Although many inorganic nan...

    Rongchen Xu, **aodan Mu, Zunhan Hu, Chongzhi Jia, Zhenyu Yang… in Nano Research (2023)

    Download PDF (20197 KB)

  17. No Access

    Article

    Fabricating ion-conducting channel in SU-8 matrix for high-performance patternable polymer electrolytes

    Advances in electrochemical energy storage technologies drive the need for battery safety performance and miniaturization, which calls for the easily processable polymer electrolytes suitable for on-chip micro...

    Tianzhao Li, Xuelei Pan, Zhongzhuo Yang, Fang Liu, Kesong Yu, Lin Xu… in Nano Research (2023)

  18. No Access

    Article

    Oxidation Behavior of Cu-Pb Bearing Alloys

    The oxidation kinetics of Cu-Pb bearing alloys was investigated under a temperature domain between 25 and 700 °C. It has been found that during oxidation process, lead was easy to diffuse in the channel formed...

    Qiaoqin Guo, Jihui Chen, Yuntao Dong… in Journal of Materials Engineering and Perfo… (2023)

  19. Article

    Open Access

    Repair of critical diaphyseal defects of lower limbs by 3D printed porous Ti6Al4V scaffolds without additional bone grafting: a prospective clinical study

    The repair of critical diaphyseal defects of lower weight-bearing limbs is an intractable problem in clinical practice. From December 2017, we prospectively applied 3D printed porous Ti6Al4V scaffolds to recon...

    Bingchuan Liu, Guo** Hou, Zhongwei Yang… in Journal of Materials Science: Materials in… (2022)

    Download PDF (1364 KB) View Article

  20. No Access

    Article

    Study of Polytetrahydrofuran on Polyoxymethylene-Based Binder in Metal Injection Molding

    The feedstock prepared by polyoxymethylene (POM)-based binder usually has high viscosity and poor fluidity in the injection process, which can easily cause defects such as insufficient injection, flow lines an...

    Zheng Huang, Xuyun Qiao, Chuxiong Ding… in Transactions of the Indian Institute of Me… (2022)

previous disabled Page of 5