![Loading...](https://link.springer.com/static/c4a417b97a76cc2980e3c25e2271af3129e08bbe/images/pdf-preview/spacer.gif)
11,125 Result(s)
-
Article
Correction: Study on Roof Deformation and Failure Law of Close Distance Coal Seams Mining Based on Digital Image Correlation
-
Article
One-Pot Template-Free Synthesis of Mesoporous ZnCo2O4 Microbubbles for Oxygen Evolution Reaction
Spinel ZnCo2O4 is an important multi-functional material with wide applications, such as electrocatalytic oxygen evolution reaction. However, it still remains a challenge to synthesize ZnCo2O4 with complex morpho...
-
Article
Shear-Coupled Multiaxial Deformation Behavior of Rolled AZ31B Magnesium Alloy
The mechanical behavior of a rolled AZ31B magnesium alloy under uniaxial loading, combined axial torsion, and combined axial-transverse shear loading with different strain paths has been investigated, which in...
-
Article
Tailoring the Microstructure and Mechanical Properties of Ta-Alloyed AlCoCrFeNi High-Entropy Alloys
Laves phase-reinforced high-entropy alloys (HEAs) have drawn widespread interest due to their excellent mechanical performance at room/elevated temperatures. In this work, we prepare a few (AlCoCrFeNi)100-xTax (x
-
Article
Effect of Annealing Stress on the Magnetic Properties of High-Grade Non-oriented Electrical Steel
Effect of annealing stresses on the magnetic properties of non-oriented electrical steel has been studied. When the annealing stress increases from 2.5 to 4.5 MPa, the iron loss P1.0/400 of non-oriented electrica...
-
Article
Thin-Film Faradaic/Electric Double-Layer Capacitor Enabled by Porous Chromium Nitride Electrode
With the rise of wearable device applications, efficient energy storage devices with flexible properties have become an important research direction. Among these devices, supercapacitors with high stability an...
-
Article
Effect of Mn Contents on Microstructure Evolution and Recrystallization Behavior of 18.5 Pct Cr Low-Nickel Type Duplex Stainless Steel During Multi-pass Hot Compression
This study examined the effect of manganese (Mn) contents (3.12 to 8.97 pct) and three-pass deformation distributions on dynamic recrystallization (DRX) and dislocation evolution during hot compression of low-...
-
Article
Comparison of Modifications for Enhancing the Electrooxidation Performance of Porous Ni Foil Catalytic Electrodes Derived from Paper Templates: Cu-Added Alloying and In Situ Growth of Ni-S Nanosheets
Improving the performance of porous nickel-based material used widely in the energy field is necessary. Alloying and increasing the specific surface area are essential approaches. This study used rice paper (...
-
Article
Analyzing the Contraction Force of Artificial Muscles Under Negative Pressure Actuation
Artificial muscles actuated by negative pressure offer significant benefits over those driven by positive pressure, such as high contraction ratios and improved safety, making them a promising option for vario...
-
Article
Mechanisms of Genipin and MCNT effects on the actuation properties and failure of chitosan gel bionic artificial muscles
The poor actuation characteristics of current bionic artificial muscles limit their application in engineering practice. Chitosan and graphene are used as the main components to prepare bionic artificial muscl...
-
Article
First principles study on the mechanical properties and generalized stacking fault energy of CsCl, CsBr and CsI
In this paper, the lattice constants, elastic anisotropies, and elastic constants (C11, C12 and C44) of three Cs halide materials, CsCl, CsBr and CsI have been investigated for the first time by using first-pr...
-
Article
A Novel Reclamation Method of Chemical–Mechanical Grinding for Inorganic Binder Waste Sand in Aluminum Alloy Casting Process
The current approach to reclaiming inorganic binder waste sand discharged during the aluminum alloy casting process typically involves mechanical grinding combined with calcination treatment (650–700 °C). Howe...
-
Article
Failure analysis of nanoscale VO2 used as the cathode electrode for aqueous zinc-ion batteries
In this study, VO2 nanoparticles were synthesized in a single step using a simple and rapid low-temperature combustion synthesis method. When used as the cathode electrode material for aqueous zinc-ion batteries....
-
Article
APTES functionalized AlGaN/GaN HEMT for carbon dioxide sensing at room temperature
In this work, the 3-aminopropyltriethoxysilane (APTES) was functionalized in the gate region of AlGaN/GaN high electron mobility transistor (HEMT) for carbon dioxide sensing. The results indicate that the fixa...
-
Article
Low-Temperature Oxidation of Diesel Particulate Matter Using Dielectric Barrier Discharge Plasma
The oxidation behavior of actual diesel particulate matter (DPM) prepared from diesel combustion was studied using a dielectric barrier discharge (DBD) reactor. The primary oxidation temperature (T30 at which 30%...
-
Article
The Comprehensive Effect of Electronic Irradiation and Thermal Cycling on the Thermal and Mechanical Properties of Sn-3.0Ag-0.5Cu Solder Joints
The rapid development of aerospace electronics towards lightweight and miniaturized designs has put forward higher requirements for the reliability of device interconnection. It is crucial to study the effects...
-
Article
Process Parameter Optimization and Corrosion Performance Evaluation of Electrodeposited Ni-SiC Coatings Modified by Laser Remelting
Electrodeposited nanocomposite coatings have received considerable attention owing to their excellent properties. However, nanocomposite coatings usually have defects, such as pores and nanoparticle aggregatio...
-
Article
Recent advances in integrated capture and electrochemical conversion of CO2
Capturing and electrochemically converting carbon dioxide (CO2) from industrial point sources, such as flue gas, is a promising approach to mitigate the greenhouse effect and protect the environment. However, the...
-
Article
A review of recent advances in the stability, efficacy, and biosafety of black phosphorus-based drug delivery
Two-dimensional black phosphorus nanosheets (BPNSs) possess remarkable structures and properties, including a honeycomb-like wrinkled morphology and a tunable direct band gap. These attributes make BPNSs highl...
-
Article
Dissimilar Laser Welding of Plastic to Stainless Steel with a Flat-Top Heat Source: Numerical Simulation and Experimental Investigation
Diode laser with a flat-top beam was very suitable for the joining of plastic and metals as its uniform energy distribution to fine tuning the temperature, which facilitates the melting of plastic achieving a ...