Search
Search Results
-
Dynamic characteristics of gear-rotor system with gear eccentricity and wear fault
Due to installation errors and poor lubrication conditions, the gear system has both eccentricity and wear fault. The eccentricity effect of the gear...
-
Assembly line balancing with product and operator oriented sequence dependent task times using tabu search algorithm
The problem is formulated as a mixed-integer nonlinear programming model, with the objective of minimizing sequence-dependent setups while meeting...
-
Nonlinear vibration analysis in high speed milling of single crystal silicon considering dynamic cutting thickness
In the milling process, the spindle vibration response is an important factor affecting the machining quality and accuracy. In this article, the...
-
Interaction and optimisation study of the influence of calcium-carbide-waste, crumb rubber, and fly-ash on the mechanical properties of a developed self-compacting-rubberized concrete for sustainable manufacturing processes
This study presents an innovative approach to develo** ecologically sustainable self-compacting concrete. It utilises high-volume fly ash (HVFA)...
-
A Study on Solidification Behavior of a High Pressure Die Cast Aluminum Swing Arm Using Commercial Modeling Software To Predict Porosity Level
In the automobile industry, aluminum casting is a commonly utilized production process for structural components. However, flaws in aluminum castings...
-
An experimental assessment of roll waves evolution in mud-like fluids flowing down steep slopes
The free-surface behavior prediction is conditioned by the appearance of hydrodynamic instabilities, which may arise at the interface when flow...
-
-
Multimode Design and Analysis of an Integrated Leg-Arm Quadruped Robot with Deployable Characteristics
To improve locomotion and operation integration, this paper presents an integrated leg-arm quadruped robot (ILQR) that has a reconfigurable joint....
-
Impact of surface roughness on the coefficient of friction of polymer-on-polymer contacts for deflection pulley-rope systems in the lift industry
The coefficient of friction (CoF) between the deflection pulley and rope in a lift strongly affects the life span of the rope. Although surface...
-
Particle Condensation in Two-Temperature (2T) Arc Plasmas of Various SF6 Replacements
Fluorinated gases, e.g., CF 3 I, C 3 F 8 , C 4 F 8 , C 4 F 7 N, and C 5 F 10 O, show potential to replace SF 6 in power industry due to their high dielectric strength...
-
Application of Friction Riveting technique for the assembly of electronic components on printed circuit boards (PCB)
This study focuses on the effects of reducing the diameter of rivets used in Friction Riveting due to the need for downscaling when joining...
-
An optical remote sensing image encryption algorithm for sensitive targets in sea-related scenes
Satellite remote sensing images, obtained through imaging earth from space, are widely used in military and national economic construction. Remote...
-
Study of the impact of metallic components Cu, Ni, Cr, and Mo on the microstructure of Al2O3–Cu–Me composites
The study explores the microstructural design of hybrid Al 2 O 3 –Cu–Me composites formed by centrifugal slip casting into porous molds. Obtained...
-
System identification based on characteristic curves: a mathematical connection between power series and Fourier analysis for first-order nonlinear systems
Recently, the s inosoidal o utput r esponse in p ower s eries (SORPS) formalism was presented for system identification and simulation. Based on the...
-
Calculation of the decomposition products of C5F10O-Air mixtures from 500 K to 3500 K with a chemical kinetic model
C 5 F 10 O-Air mixtures have a great potential to replace SF 6 in medium-voltage power equipment. However, during the partial overheating or arc...
-
A three-in-one dynamic shared bicycle demand forecasting model under non-classical conditions
AbstractBicycle sharing systems are becoming highly popular and there have accumulated a large volume of users’ trajectory data. In a bicycle sharing...
-
Manufacture of tunnel-shaped sheet metal parts with improved accuracy using novel toolpath strategies for single point incremental forming
Single point incremental forming is a novel sheet metal forming process that crafts 3D shapes out of sheet metal using layerwise deformation of the...
-
Numerical study on local failures of reinforced concrete slabs against underwater close-in explosions
Reinforced concrete (RC) slabs are the primary load-carrying member of underwater facilities. They can suffer severe local failures such as...
-
The Comparison between Additively Manufactured and Molded 3D Scaffolds for Tissue Engineering Applications
Blood vessels are essential as they transport oxygen and nutrients. To address the increasing mortality rate from cardiovascular diseases, modern...
-
Effect of micromorphology on measurement of residual stress of ground silicon wafers using Raman spectroscopy
Wafer rotation grinding is widely used to obtain thin and ultrathin silicon wafers due to its high precision and efficiency. Residual stress would be...
