Search
Search Results
-
Development of accumulative roll bonding for metallic composite material preparation and mechanical/functional applications
Accumulative roll bonding (ARB) is a severe plastic deformation method to prepare the metallic composite material by physical method at room to...
-
Effect of two-pass rolling of textured roll and polished roll on surface topography and mechanical properties of 316L stainless steel ultra-thin strip
The textured roll and polished roll were applied instead of the ground roll in a 20-high mill to conduct two-pass rolling of 316L stainless steel...
-
Microstructural evolution during tempering process and mechanical properties of Cr–Ni–Mo–V/Nb high strength steel
High strength steels exhibit superior mechanical properties due to the unique microstructure, which successfully solves the drawback of the...
-
Wettability and corrosion behavior between alkaline slag from sodium smelting of vanadium–titanium magnetite and refractory substrates
The sodium smelting of vanadium–titanium magnetite can achieve the comprehensive utilization of Fe, V, and Ti. However, the generation of alkaline...
-
Interfacial behaviors between ZG13Cr9Mo1VNbN stainless steel and chromite sand
To elucidate the formation mechanisms of burn-on sand and metal penetration during sand casting, some laboratory experiments were carried out at...
-
Effect of TiO2 and BaO on viscosity and potassium removal capacity of blast furnace slag
In order to increase the utilization rate of vanadium–titanium magnetite in blast furnace smelting, the viscosity and potassium removal capacity of...
-
Identification of working conditions and prediction of FeO content in sintering process of iron ore fines
The iron oxide (FeO) content had a significant impact on both the metallurgical properties of sintered ores and the economic indicators of the...
-
Effect of TiO2 addition on microstructures and properties of MgO–CaO refractory aggregates
MgO–CaO (40 wt.% CaO) refractory aggregates were prepared using the calcined dolomite and light-burned magnesia fine powder as raw materials and TiO 2 ...
-
Quantitative characterization of reaction behavior between La-bearing FeCrAl melt and CaO–Al2O3–La2O3-based slags and its guidance for design of mold flux
The reaction behavior between CaO–Al 2 O 3 –La 2 O 3 -based slags and La-bearing FeCrAl melt was quantitatively characterized, which was further compared...
-
Effect of initial microstructure on microstructure evolution and mechanical properties of 0.12C martensitic steels during quenching and tempering
The microstructure evolution and mechanical properties of a Fe–0.12C–0.2Si–1.6Mn–0.3Cr–0.0025B (wt.%) steel with different initial microstructures,...
-
Effect of distance between heat sources on droplet transfer behavior and weld formation of AH36 during laser and CWW GMAW arc hybrid welding
In order to analyze the influence of the distance between heat sources ( D LA ) on the welding process, the effects of D LA on the droplet transfer...
-
Iron recovery and dephosphorization behaviors from high-phosphorus oolitic hematite by gas-based direct reduction and magnetic separation
With the depletion of high-quality iron ore resources, high-phosphorus oolitic hematite (HPOH) has attracted great attention due to its large reserve...
-
Effect of cooling method on TiN precipitation behavior of high-titanium high-strength steel during solidification
Metallographic microscopy, scanning electron microscopy and TiN growth thermodynamic and kinetic equations were used to investigate the morphology,...
-
Effect of silica on crystallization process of calcium ferrite: thermodynamic and kinetic analysis
SiO 2 is the main component of gangue in sinters and a crucial constituent in the formation of the SiO 2 –Fe 2 O 3 –CaO (SFC) system. The non-isothermal...
-
High-temperature corrosion resistance of Fe–Cr–Mo amorphous coating for water wall protection of USC boiler
A novel Fe–Cr–Mo amorphous coating, a high-temperature corrosion-resistant material for water wall protection of power plant ultra-supercritical...
-
Underoil superhydrophilic flame-retardant 3D porous composite for efficient on-demand emulsion separation: Interface engineering design on sphagnum moss
Oil pollution and the energy crisis make oil-water separation an urgent for human need. The widespread use of materials with a single emulsion...
-
High-temperature wetting behavior between slag and refractory
Slag corrosion is one of the main factors of the damage of refractory, and its primary manifestations involve the melting of refractory in slag and...
-
Refining mechanism of tin–bismuth alloy solidified structure upon applying direct current attached mold
Herein, the effect of direct current (DC) attached the mold on refining the microstructure and alleviating the central segregation of a tin–bismuth...
-
Methodology for the assessment of the friction torque of ball slewing bearings considering preload scatter
This manuscript presents an innovative methodology for the assessment of the friction torque of ball slewing bearings. The methodology aims to...