Skip to main content

29,958 Result(s)

within **u-**u Zhang Remove this filter Characterization and Evaluation of Materials Remove this filter

Page of 1,498
and

  1. No Access

    Article

    Component gradually varied templates-derived carbons: effect of composition of template on their structure and supercapacitor performances

    The composition and chemical properties of template could influence the morphology, texture and surface chemistry of the resultant carbon and their performances for supercapacitor. Herein, we systematically in...

    Jianghui Cheng, Shihui Yu, Bei Cheng, Wanju Zhang… in Journal of Materials Science (2024)

  2. No Access

    Article

    Structural characterization and magnetic behavior of Ni2FeGa alloy nanowires fabricated by pulsed electrodeposition

    Ni44.1Fe33.2Ga22.8 (NFG) Heusler alloy nanowires were fabricated using a pulsed electrodeposition method. The challenge of co-depositing the Ga element in ternary alloy nanowires was addressed by employing dual c...

    Lei Liu, Yunxiu Zhao, Yingde Zhang, Jiaohong Huang… in Journal of Nanoparticle Research (2024)

  3. No Access

    Article

    Ag/Ni Sintering Metallization on Si3N4 Ceramic Package Substrate

    Metal-coated Si3N4 ceramic substrates exhibit exceptional reliability, rendering them highly promising candidates for implementation in high-power electronics. To create Ag/Ni coated Si3N4 substrate, Ni coating w...

    Beiji Wang, **angya Jia, Shunjian Xu… in Journal of Materials Engineering and Perfo… (2024)

  4. No Access

    Article

    Study on the Precipitation Strengthening Mechanism of Mg–10Zn–5Al–0.2Sc Alloy

    The Mg–10Zn–5Al–0.2Sc (wt%) alloy was fabricated through gravity casting and subsequent heat treatment. The microstructure and precipitates of the alloy samples were meticulously examined using OM, SEM/EDS, an...

    A. X. Jiang, Z. Y. You, S. S. **, Y. G. Zhang… in International Journal of Metalcasting (2024)

  5. No Access

    Article

    Design of elastic metamaterial plate and application in subway vibration isolation

    While using the subway brings people convenient transportation, The low frequency vibration caused by metro is one of the factors that seriously threaten the physical and mental health of human beings and the ...

    Qian Wang, Linchang Miao, Haizhong Zheng, Peng **ao, Benben Zhang in Applied Physics A (2024)

  6. No Access

    Article

    Rapid analysis of untreated food samples by gel loading tip spray ionization mass spectrometry

    Rapid, efficient, versatile, easy-to-use, and non-expensive analytical approaches are globally demanded for food analysis. Many ambient ionization approaches based on electrospray ionization (ESI) have been de...

    Md. Matiur Rahman, Shuanglong Wang, Jiaquan Xu… in Analytical and Bioanalytical Chemistry (2024)

  7. No Access

    Article

    First principles study on the mechanical properties and generalized stacking fault energy of CsCl, CsBr and CsI

    In this paper, the lattice constants, elastic anisotropies, and elastic constants (C11, C12 and C44) of three Cs halide materials, CsCl, CsBr and CsI have been investigated for the first time by using first-pr...

    Shaorong Li, Dongwei Qiao, Chengyue Wang, **aozhi Wu, Hao Wang… in Applied Physics A (2024)

  8. No Access

    Article

    Reduction of High-Frequency Core Loss of a Fe77.2Si11B8.5Cu0.8Nb2.5 Soft Magnetic Nanocrystalline Alloy by Minor Alloying

    Enhancing saturation magnetic flux density (Bs) while reducing high-frequency core loss in Finemet-type nanocrystalline alloys is of great significance in achieving the miniaturization, high-frequency, and energy...

    Shushen Guo, Yanhui Li, Yibing Zhang, Lu Yang… in Acta Metallurgica Sinica (English Letters) (2024)

  9. No Access

    Article

    Evolution of Inclusion Distribution in Continuous Casting Slabs During Strip Feeding

    Feeding strip significantly enhances continuous cast slab quality. To clarify its impact on inclusion distribution, a mathematical model coupling flow, solidification and inclusion motion have been developed. ...

    Rui Zhang, Hong-Chun Zhu, Hua-Bing Li… in Metallurgical and Materials Transactions B (2024)

  10. No Access

    Article

    Formation of polycrystalline-Co particle-chains in Cu–Co alloy during liquid-phase sintering in a high magnetic field

    Liquid-phase sintering of Cu–30 wt.% Co alloy, involving liquid Cu coexisting with solid Co particles, was performed with and without a 12 T magnetic field. The microstructure evolution and coarsening behavior...

    Siyu Zhang, Tie Liu, Ling Miao, Kai Wang, **aoming Liu… in Journal of Materials Science (2024)

  11. No Access

    Article

    APTES functionalized AlGaN/GaN HEMT for carbon dioxide sensing at room temperature

    In this work, the 3-aminopropyltriethoxysilane (APTES) was functionalized in the gate region of AlGaN/GaN high electron mobility transistor (HEMT) for carbon dioxide sensing. The results indicate that the fixa...

    Linxin Xu, Heqiu Zhang, Yihang Wu… in Journal of Materials Science: Materials in… (2024)

  12. No Access

    Article

    Investigation of the Impact of Thermo-Stam**, Fiber Orientation, and Metal Thickness on the Formability of Fiber Metal Laminates

    Despite being invented several decades ago, fiber metal laminates (FMLs) still encounter challenges in large-scale manufacturing, especially in forming small and complex-shaped components. These challenges ari...

    Hamza Blala, Cheng Pengzhi, Zhang Shenglun, Cheng Gang… in Applied Composite Materials (2024)

  13. No Access

    Article

    Highly toughened PP/Rice husk charcoal composites modified Ethylene Propylene Diene Monomer (EPDM) with glycidyl methacrylate

    In this article, a strategy is proposed to prepare highly toughened composites from polypropylene (PP), rice husk charcoal (RHC) and glycidyl methacrylate (GMA)-modified EPDM using melt blending and hot pressi...

    Y. B. Wang, X. L. Deng, B. Y. Cao, H. P. Feng, J. Chen… in Journal of Polymer Research (2024)

  14. No Access

    Article

    Effect and Mechanism of Refinement on Macro-segregation in Squeeze Casting Low-Tin Bearing Alloys

    During the investigation of the direct squeeze casting process for the production of Al-5Sn-Cu low-tin bearing alloy parts, particularly floating bushings, this study has explored the effect and mechanism of g...

    Ming Xu, Yanguo Yin, Jilin Miao, **aoliang Fang… in International Journal of Metalcasting (2024)

  15. No Access

    Article

    Preparation and property of PVA-based colorful coating composite reinforced with silica aerogel particles filled by high-loaded flame retardant

    Hydrophilic mesoporous silica aerogel particles were synthesized via self-assembly of amphiphilic polymer (Ph8-PEG6-PEOS) and its instantaneous hydrolysis and condensation in the alkaline environment. Meanwhil...

    Yilin Feng, Ran Xu, Ying Li, Beibo Zhang, Jiali Wang… in Colloid and Polymer Science (2024)

  16. No Access

    Article

    Microstructure and Wear Resistance of In Situ Synthesized (Ti,V)C Reinforced Nickel Matrix Composite Coatings

    In situ synthesized (Ti, V)C reinforced Ni-based composite coatings were prepared using laser cladding method. The phase composition, microstructure, hardness, and wear resistance of the composite coatings wit...

    Ze Sun, Hanguang Fu, Jian Lin, Jiguang Zhang… in Journal of Materials Engineering and Perfo… (2024)

  17. No Access

    Article

    A facile injectable and self-healing carbon dot/oxidative polysaccharide hydrogel with sustained release capability and potent antibacterial activity

    Multi-functional hydrogels possess significant potential for use in clinical medical treatments. In this study, we synthesized a polysaccharide hydrogel containing carbon dots (CDs) for the purpose of creating...

    Peili Li, Zhiyue Wang, Meizhe Yu, Chen Cheng, Junhua Chen… in Journal of Materials Science (2024)

  18. No Access

    Article

    Low-Temperature Oxidation of Diesel Particulate Matter Using Dielectric Barrier Discharge Plasma

    The oxidation behavior of actual diesel particulate matter (DPM) prepared from diesel combustion was studied using a dielectric barrier discharge (DBD) reactor. The primary oxidation temperature (T30 at which 30%...

    Baoyong Ren, Tiantian Zhang, Zuliang Wu, **g Li… in Plasma Chemistry and Plasma Processing (2024)

  19. No Access

    Article

    Nitrogen–carbon-induced spinodal structure in plasma nitrocarburized 38CrMoAl with hollow cathode discharging

    The commonly utilized nitriding steel 38CrMoAl is employed for components subjected to low-impact loads but high wear. In this investigation, 38CrMoAl underwent plasma nitrocarburizing using a hollow cathode p...

    Zhehao Zhang, Zhengwei Wang, Minghao Shao, Yongyong He… in Journal of Materials Science (2024)

  20. No Access

    Article

    Defect-engineered chiral metal–organic frameworks

    Chirality has an important impact on chemical and biological research, as most active substances are chiral. In recent decades, metal–organic frameworks (MOFs), which are assembled from metal ions or clusters ...

    **aohui Niu, Yuewei Wang, Yongqi Liu, Mei Yuan, Jianying Zhang… in Microchimica Acta (2024)

Page of 1,498