Skip to main content

Page of 53
and
  1. No Access

    Article

    Strategies and methods of nanocrystal technology for targeting drug delivery

    Nanocrystals is an important pharmaceutics approach to improve the drug efficacy of insoluble candidate compounds. However, the current nanocrystal-targeted delivery strategy and delivery efficiency are still ...

    Linying Xue, Jianhua Ding, Yanchao Liu, Yingying Ma in Journal of Nanoparticle Research (2024)

  2. No Access

    Article

    Research on triazine-based nitrogen-doped porous carbon/Pebax mixed-matrix membranes for CO2 separation and its gas transport mechanism

    Nitrogen-doped porous carbon (NPC) has a rich microporous structure and nitrogen-rich units, and its nitrogen-containing group can interact strongly with the PEO chain segment of Pebax, synergistically improvi...

    Peilin Li, Wenzhong Ma, **g Zhong, Yang Pan in Journal of Nanoparticle Research (2024)

  3. No Access

    Article

    Local Influences of Transient Basicity Segregation in Iron-Bearing Materials on Softening and Melting in Blast Furnaces at High Temperatures

    The distribution of iron-bearing granular materials in the throat of a blast furnace (BF) plays a crucial role in influencing their performance at high temperatures. Therefore, it is essential to establish a q...

    Zhehan Liao, Kai Wang, Yizhang Yang in Metallurgical and Materials Transactions B (2024)

  4. No Access

    Article

    Exfoliation Corrosion of As-Extruded Mg–1Li–1Ca: the Influence of the Superficial Layer

    Exfoliation corrosion (EFC) has rarely been reported for wrought magnesium alloys. Enhanced EFC of the as-extruded Mg–1Li–1Ca alloy was observed after the removal of outermost fine-grained skins. The microstru...

    Ze-Song Wei, Zi-You Ding, Lei Cai in Acta Metallurgica Sinica (English Letters) (2024)

  5. No Access

    Article

    Effect of quaternized chitosan magnetic nanoparticles carrying indocyanine green phototherapy on cervical cancer cells

    The objective of the study is to prepare quaternized chitosan magnetic nanoparticles (ICG@Fe3O4@QCS) loaded with indocyanine green and to investigate their properties. Fe3O4@QCS nanoparticles were prepared by a o...

    **aohui Tang, Qian Zhang, Kadireya Aikelamu, **gya Bai in Journal of Nanoparticle Research (2024)

  6. No Access

    Article

    Penetration-Dependent Microstructures in TiO2-Induced Weld Metal of EH36 Shipbuilding Steel

    Microstructural characteristics has been investigated along the weld metal penetration of EH36 shipbuilding steel processed by CaF2–30 wt. pct TiO2 flux under 60 kJ·cm−1 submerged arc welding. It is demonstrated ...

    Yongwu Wu, **aobo Yuan, Ming Zhong, Junjie Ma in Metallurgical and Materials Transactions A (2024)

  7. No Access

    Article

    Effects of Heat Treatment on the Mechanical and Corrosion Resistance Properties of 316L NRHH Porous Bone Scaffolds by Selective Laser Melting

    Heat treatment was applied to 316L porous scaffolds with a negative re-entrant hexagonal honeycomb (NRHH) structure made by selective laser melting (SLM) at temperatures between 450 °C and 1100 °C. The effects...

    **nzhi Hu, Shubo Xu, **aoyu Ju, **quan Ma in Metallurgical and Materials Transactions A (2024)

  8. Article

    Open Access

    New Insight into Toughness Enhancement in a Lath Martensitic Steel

    Grain refinement of the parent austenite led to a significant change in the intervariant boundary network of martensite, ultimately improving the mechanical properties (i.e., toughness and hardness). Molecular dy...

    Ahmad Mirzaei, Christopher D. Barrett in Metallurgical and Materials Transactions A (2024)

  9. No Access

    Article

    Effect of Differential Flow Blowing Argon and Nozzle Position on Mixing Time and Slag Eye in Dual Nozzle Ladle Using Water Model Experiment

    Established a 1/4 water model experimental system to study the mixing phenomenon and slag eye during ladle refining process. On the basis of traditional equal flow bottom blowing method, differential flow bott...

    Ning Wang, Zhongqiu Liu, Baokuan Li in Metallurgical and Materials Transactions B (2024)

  10. No Access

    Article

    The modification of nano-activated carbon used to construct particle electrodes and its application in degradation of nitrosodiethylamine

    Activated carbon has broad application prospects for treating pollutants due to its easy availability, low cost and good adsorption. In our work, nano-activated carbons (NAC) with abundant functional groups ar...

    Liyan Ma, Fengyi Sun, Zhuwu Jiang, Hongcheng Di, Chuntao Pan in Carbon Letters (2024)

  11. No Access

    Article

    Self-healing mechanisms for Ge–Sb–S chalcogenide glasses upon gamma irradiation

    We report atomistic mechanisms that directly correlate the time-dependent optical responses of bulk Ge23Sb7S70 chalcogenide glasses to their metastable structural defects created and subsequently annihilated foll...

    Myungkoo Kang, Byoung-Uk Sohn, Qingyang Du, Danhao Ma, Ruturaj Pujari in MRS Bulletin (2024)

  12. No Access

    Article

    Effect of Room Temperature Ultrasonic Vibration Compression on the Microstructure Evolution and Mechanical Properties of AZ91 Alloy

    To investigate the potential of direct ultrasonic vibration on improving the performance of magnesium alloys, this study first employed the ultrasonic vibration compression (UVC) on the solid solution treated ...

    Ziyue Xu, Huan Liu, Luyao Li, Chao Sun in Acta Metallurgica Sinica (English Letters) (2024)

  13. No Access

    Article

    Synthesis of multicolor fluorescent CDs from natural plant kaempferide and their application in anti-counterfeiting inks

    Carbon dots (CDs) are versatile nanomaterials with tunable luminescent properties. We used a natural plant kaempferol as a carbon source to synthesize multicolor CDs by reacting it with various nitrogen source...

    Lin** Ma, **ang Long, Yanshun Ma, Shaogui Wu in Carbon Letters (2024)

  14. No Access

    Article

    Influence of Fe on the Distribution Characteristics of P in Silicon Melt During Directional Solidification

    Other impurity components in silicon melt at high temperature will affect P removal from metallurgical-grade silicon (MG–Si). Fe is one of the most abundant impurities in silicon and therefore probably affects...

    Qian He, Linjun Han, Jijun Wu, Wenhui Ma in Metallurgical and Materials Transactions B (2024)

  15. No Access

    Article

    Oxidation Resistance of In Situ Reaction/Hot Pressing Synthesized Ti2AlC–20% TiB2 Composite at 600–900 °C in Air

    The oxidation behavior and kinetics of Ti2AlC–20vol.%TiB2 composite at 600–900 °C in air were investigated. The results showed that the oxidation kinetics of the composite followed a logarithmic law within the gi...

    Wenting Wang, **gjun Xu, Jun Zuo, Ke Ma in Acta Metallurgica Sinica (English Letters) (2024)

  16. No Access

    Article

    Effect of Sn Addition on the Evolution of Inclusions in Metallurgical Grade Silicon

    Inclusions in metallurgical grade silicon (MG-Si) can significantly degrade the quality and performance of silicon materials. Thus, it is essential to implement effective measures to control and minimize their...

    Zuhan Shan, Jijun Wu, Kuixian Wei in Metallurgical and Materials Transactions B (2024)

  17. No Access

    Article

    Interfacial Reaction of Ti6Al4V Lattice Structure-Reinforced VW92 Alloy Matrix Composites

    A novel melting infiltration by ultrasonic vibration was investigated and applied to fabricate Ti6Al4V (TC4) lattice structure-reinforced Mg–10Gd–2Y–1Zn–xZr (refer to VW92 hereafter, x = 0, 0.5 wt%) alloy matrix ...

    Haijun Wang, Renju Cheng, **anhua Chen in Acta Metallurgica Sinica (English Letters) (2024)

  18. No Access

    Article

    Tuning the magnetic configuration of bilayer graphene quantum dot by twisting

    Twistronics has recently attracted tremendous attention because the twisting can engineer the bilayer graphene-like materials into varying types of strongly correlated phases. In this article, we study the twi...

    Ma Luo in MRS Bulletin (2024)

  19. No Access

    Article

    One-step synthesis of Cu/Therminol VP-1 nanofluids by phase transfer method and their thermal stability and thermophysical properties

    Heat transfer oil-based nanofluids with metal nanoparticles can enhance energy conversion system thermal efficiency. However, high-surface-energy nanoparticles tend to aggregate, causing nanofluid instability....

    Lu Zhou, Jiewei Zhu, Honghe Ma in Journal of Nanoparticle Research (2024)

  20. No Access

    Article

    Intelligent neuromorphic computing based on nanophotonics and metamaterials

    With the rapid development of artificial intelligence and computing chips approaching the bottleneck of power consumption and computing power, the research on intelligent computing hardware with high speed and...

    Qian Ma, **nxin Gao, Ze Gu, Che Liu, Lianlin Li, Jian Wei You in MRS Communications (2024)

Page of 53