-
Chapter and Conference Paper
Development of Control System for Supercritical 600MW Steam Turbine Made in Domestic
Nowadays, the number of large capacity units with high parameters, especially with thin long shafts and supercritical pressure has been increased rapidly in electric network. The safety of these units will hav...
-
Chapter and Conference Paper
A Theoretical Investigation on Experimental Model of Torsional Vibration for Turboset Shafting
This paper deduces the relationships between the natural frequency f of torsional vibration and the geometry dimension both for a simple ideal model and a real turboset shafting at first. It is found that the fre...
-
Article
Electrochemical performances of as-cast and annealed La0.8-x Nd x Mg0.2Ni3.35Al0.1Si0.05 (x = 0–0.4) alloys applied to Ni/metal hydride (MH) battery
The La–Mg–Ni-based A2B7-type La0.8-x Nd x Mg0.2Ni3.35Al0.1Si0.05 (x = 0, 0.1, 0.2, 0.3, and 0.4) electrode alloys were prepared by casting and annealing. The infl...
-
Article
Research progress in Mg-based hydrogen storage alloys
Magnesium and magnesium-based alloy hydrides remain attractive hydrogen storage materials owing to high hydrogen capacity and rich reserves in the earth’s crust. A high stability of hydride and sluggish hydrid...
-
Article
The electrochemical hydrogen storage characteristics of as-spun nanocrystalline and amorphous Mg20Ni10−x M x (M=Cu, Co, Mn; x = 0–4) alloys
In this paper, we comprehensively investigate the influences of M (M=Cu, Co, Mn) substitution for Ni on the structures and electrochemical hydrogen storage characteristics of the nanocrystalline and amorphous Mg2...
-
Article
Enhanced methanol oxidation activity of Au@Pd nanoparticles supported on MWCNTs functionalized by MB under ultraviolet irradiation
A successful approach to assemble Au core Pd shell (Au@Pd) nanoparticles on the surface of multi-walled carbon nanotubes functionalized by methylene blue (MB) (Au@Pd/fuv-MWCNTs) was reported. In this method, MWCN...
-
Article
Gaseous and electrochemical hydrogen storage behaviors of nanocrystalline and amorphous Nd-added Mg2Ni-type alloys
Melt spinning technology was used to prepare the Mg2Ni-type (Mg24Ni10Cu2)100−x Nd x (x = 0, 5, 10, 15, 20) alloys in order to obtain a nanocrystalline and amorph...
-
Article
The electrochemical hydrogen storage performances of Si-added La–Mg–Ni–Co-based A2B7-type electrode alloys
In order to improve the electrochemical cycle stability of the RE–Mg–Ni-based A2B7-type electrode alloys, a small amount of Si has been added into the alloys. The casting and annealing technologies were adopted t...
-
Article
Perovskite ink with wide processing window for scalable high-efficiency solar cells
Perovskite solar cells have made tremendous progress using laboratory-scale spin-coating methods in the past few years owing to advances in controls of perovskite film deposition. However, devices made via sca...
-
Article
Facile fabrication of ZnO–CuO porous hybrid microspheres as lithium ion battery anodes with enhanced cyclability
ZnO–CuO porous hybrid microspheres were successfully produced through a facile aging process of zinc citrate solid microspheres in copper sulfate solution combined with the subsequent annealing treatment in ai...
-
Article
Double glow plasma carburization on zirconium to improve surface hardness and wear resistance
Though some important progress in the excellent mechanical properties of zirconium alloys have been reported, their high surface hardness and good wear properties need to be explored further. In this work, a c...
-
Article
Coercivity, microstructure, and thermal stability of sintered Nd–Fe–B magnets by grain boundary diffusion with TbH3 nanoparticles
Grain boundary diffusion technique with TbH3 nanoparticles was applied to fabricate Tb-less sintered Nd–Fe–B permanent magnets with high coercivity. The magnetic properties and microstructure of magnets were syst...
-
Article
In situ Raman spectroscopic evidence for oxygen reduction reaction intermediates at platinum single-crystal surfaces
Develo** an understanding of structure–activity relationships and reaction mechanisms of catalytic processes is critical to the successful design of highly efficient catalysts. As a fundamental reaction in f...
-
Article
TiO2 sensitized by red-, green-, blue-emissive carbon dots for enhanced H2 production
Carbon dots (Cdots) with a broad light absorption range could be a potential stable sensitizer for TiO2, which is an excellent ultraviolet (UV) response photocatalyst. Herein, we systematically investigated the d...
-
Article
Microstructure and magnetic properties of Nd–Fe–B sintered magnets with P addition
In this paper, the effects of P do** on magnetic properties and microstructure were studied in Nd–Fe–B sintered magnets. With P do**, the grain size gets refined and the distribution of the main phase is o...
-
Article
Structures and hydrogen storage properties of RE–Mg–Ni–Mn-based AB2-type alloys prepared by casting and melt spinning
To ameliorate the electrochemical hydrogen storage properties of RE–Mg–Ni–Mn-based AB2-type electrode alloys, La element was partially substituted by Ce, and La1−xCexMgNi3.5Mn0.5 (x = 0, 0.1, 0.2, 0.3, 0.4) alloy...
-
Article
Correction to: Research on Adsorption Performance of Porous Materials Based on Ceramics to Organic Molecular Contamination
The original version of this article unfortunately contained a mistake.
-
Article
Research on Adsorption Performance of Porous Materials Based on Ceramics to Organic Molecular Contamination
In the space environment, spacecraft on orbit released a series of organic gas molecules by means of material outgassing, vacuum outgassing, eliminating propellant, and so on. These gas molecules can deposit o...
-
Article
Neutron diffraction studies of permanent magnetic materials
Neutron diffraction technology as an advanced material research technique has special advantages in studying magnetic materials compared to the conventional techniques such as X-ray diffraction (XRD), scanning...
-
Article
Electrochemical hydrogen storage behaviors of as-cast and spun RE–Mg–Ni–Co–Al-based AB2-type alloys applied to Ni–MH battery
Preparation of La–Mg–Ni–Co–Al-based AB2-type alloys La0.8−xCe0.2YxMgNi3.4Co0.4Al0.1 (x = 0, 0.05, 0.10, 0.15, 0.20) was performed using melt spinning technology. The influences of spun rate and Y content on struc...