Skip to main content

23 Result(s)

within Characterization and Evaluation of Materials Remove this filter Mechanical Engineering Remove this filter Yu** Zhou Remove this filter Chapter Remove this filter Conference Paper Remove this filter

previous disabled Page of 2
and

  1. No Access

    Chapter and Conference Paper

    Aeroheating Test of Double Cone Configurations in Shock Tunnel

    Double cone is a commonly used axial symmetric configuration in numerical and experimental studies to simulate complex flow with shock/shock and shock/boundary layer interactions [1–4]. For hypersonic vehicle ...

    Jiasui Zhou, Tao Jiang, **aowei Ma… in 30th International Symposium on Shock Wave… (2017)

  2. No Access

    Chapter and Conference Paper

    Precipitation of the Gamma Prime Phase in a Ni-Co-Based Superalloy during Different Stages of Cooling

    The cooling precipitation of the gamma primary (γ′) phase in a precipitation strengthened Ni-Co-base disk superalloy was investigated by various experimental and analytical methods. The alloy was super-solvus ...

    CY Cui, L Xu, XF Sun, YZ Zhou in Proceedings of the 8th Pacific Rim Interna… (2016)

  3. No Access

    Chapter and Conference Paper

    The Production of Bio-Steel and its Applied Research on Watches

    Nickel free high nitrogen austenitic stainless steel has bio-friendly characteristics can be widely used in the products direct contacting with the skin, because it doesn’t contain nickel which may make people...

    Bei Li, Han Dong, **anyong Bao, Yu** Lang… in Proceedings of the 8th Pacific Rim Interna… (2016)

  4. No Access

    Chapter and Conference Paper

    Influence of Y/Zn Mole Ratio on the Phase Composition and Mechanical Properties of Mg-Y-Zn Alloys

    The influence of Y/Zn mole ratio on the phase composition and mechanical properties of the Mg-Y-Zn alloys has been investigated. The results show that with the decrease of Y/Zn ratio, the Mg24Y5, 18R-LPSO phase a...

    Huan Liu, Feng Xue, **g Bai, Jian Zhou in Proceedings of the 8th Pacific Rim Interna… (2016)

  5. No Access

    Chapter and Conference Paper

    The Effect of Silicon Additions on the Thermal Stability and Morphology of Carbides in a Ni-Mo-Cr Superalloy

    The effect of silicon additions on the thermal stability and morphology of carbides has been investigated in a Ni-Mo-Cr superalloy. It is found that granular M6C carbides form at the grain boundaries in the stand...

    Li Jiang, Zhoufeng Xu, Zhijun Li, Yanling Lu… in Proceedings of the 8th Pacific Rim Interna… (2016)

  6. No Access

    Chapter and Conference Paper

    An Approach to Improve the Tensile Ductility of Particle Reinforced Ultrafine-Grained Metallic Composite by Nano-Dispersion Toughening

    Nano-Al2O3 dispersoids were introduced and uniformly distributed into the matrix of micron B4Cp reinforced ultrafine-grained Al composite by a “flake powder metallurgy” (flake PM). The resulting B4Cp/Al(Al2O3) hi...

    Genlian Fan, ** Zhou Kai, Zhiqiang Li… in Proceedings of the 8th Pacific Rim Interna… (2016)

  7. No Access

    Chapter and Conference Paper

    Effect of Long Time Thermal Exposure on Microstructure and Mechanical Properties of C276 Superalloy

    Due to the perfect mechanical properties and acceptable corrosion resistance, nickel-based superalloy C276 has been selected as the primary structure material of the experimental loop in thorium molten salt re...

    Yanling Lu, **xi Liu, **aoke Li, Li Jiang… in Proceedings of the 8th Pacific Rim Interna… (2016)

  8. No Access

    Chapter and Conference Paper

    The Corrosion Resistance of Weathering Steels in Atmospheric Exposure and Laboratory-accelerated Corrosion Tests

    The corrosion resistances of weathering steel and structure steel in atmospheric exposure and laboratory-accelerated corrosion tests have been investigated. The results showed that the corrosion rate of weathe...

    Zhifen Wang, Jianrong Liu, Yuangui Zhou… in Proceedings of the 8th Pacific Rim Interna… (2016)

  9. No Access

    Chapter and Conference Paper

    Magnetic, Magnetocaloric and Electrical Properties in Bulk Nanocrystalline Gd Metals

    Magnetic, magnetocaloric, electrical properties of nanocrystalline and coarse-grained gadolinium (Gd) metals were compared in the present work. The bulk nanocrystalline matels have been consolidated from Gd na...

    Hong Zeng, Ying Wu, Jiuxing Zhang… in Proceedings of the 8th Pacific Rim Interna… (2016)

  10. No Access

    Chapter and Conference Paper

    Martensitic Transformation Behaviors of Fe-Ni Nanoparticles under External Field

    The martensitic transformation behaviors of the Fe-Ni nanoparticles prepared by Sol-gel & reduction method under magnetic field and strain field were investigated, respectively. Results showed that the MS tempera...

    ** Mingjiang, Zhou Weishun… in Proceedings of the 8th Pacific Rim Interna… (2016)

  11. No Access

    Chapter and Conference Paper

    Stress Behavior of Incoloy 800 Superalloy in Slab Continuous Casting Process

    A three-dimensional heat transfer mathematic model and elastic-plastic constitutive equation are developed. Based on ProCAST commercial software, MiLE algorithm coupled with user program is used to simulate so...

    Anyuan Deng, Zhou Zhong, Engang Wang… in Proceedings of the 8th Pacific Rim Interna… (2016)

  12. No Access

    Chapter and Conference Paper

    Osteoblast responses to the modified surface of porous titanium

    This study was to investigate osteoblast responses to four modified surface of porous titanium struts in vitro, which including the AH surface, the AHS surface and the HA surface. The morphology, element conte...

    Guangsheng Xu, Hongchao Kou, Ruolin Li… in Proceedings of the 8th Pacific Rim Interna… (2016)

  13. No Access

    Chapter and Conference Paper

    Preparation and Optical Properties of Amorphous Sio Nanowires

    SiO nanowires have been synthesized on SiC substrates with liquid phase Fe as a novel catalyst at 1300 – 1400°C. The length of SiO nano wires is in the range of several tens to hundreds of micrometers, and the...

    Hong Zeng, Ying Wu, Ying Chen, Tao Tao… in Proceedings of the 8th Pacific Rim Interna… (2016)

  14. No Access

    Chapter and Conference Paper

    Effect of Cross Accumulative Roll Bonding Process on Microstructure and Mechanical Properties of Laminated 1100/7075 Composite Sheets

    For the laminated metal composite sheets (LMCS) fabricated by dissimilar metals, the roll bonding process has an important impact on the microstructure and mechanical properties, especially on the anisotropy. ...

    Zejun Chen, Hongbo Hu, **a Wu, Minhong Zhou… in Proceedings of the 8th Pacific Rim Interna… (2016)

  15. No Access

    Chapter and Conference Paper

    Correlation Between Internal States and Strength in Bulk Metallic Glass

    The internal states or local structures of bulk metallic glass (BMGs) can be well reflected from the changes of density, structural relaxation as well as the elastic constants. With the increasing free volume ...

    J. Tan, C. J. Li, Y. H. Jiang, R. Zhou… in Proceedings of the 8th Pacific Rim Interna… (2016)

  16. No Access

    Chapter and Conference Paper

    Research on the crack mechanism of electrodes for a high-alloyed martensitic valve steel

    The crack mechanism of electrodes for 9Cr18Mo martensitic valve steel has been analyzed in detail through calculation of phase diagram, in situ observation of high temperature microscope, thermal simulation of...

    Zhou Candong, Fang **gxian, Zhao **n in Proceedings of the 8th Pacific Rim Interna… (2016)

  17. No Access

    Chapter and Conference Paper

    An algorithm of Tool Path Generation for Parts with Regular Features

    In general, for NC machining of the models with regular features, the relevant tool paths are also arranged in regularity. In this paper, an algorithm is researched of generating tool path attached to the mode...

    Luling An, Laishui Zhou, Wei Wei… in Perspectives from Europe and Asia on Engin… (2004)

  18. No Access

    Chapter and Conference Paper

    Optimization Design of Hydraulic Servo Actuators with 3-D.O.F. and Motion Decoupling

    Robot actuator is one of very important key parts in robot researching field. Researchers hope an ideal kind of actuators with stronger output torque, lighter weight, smaller volume, motion decoupling and easi...

    **nglong Zhu, Ji** Zhou, Jianhua Zhou in Perspectives from Europe and Asia on Engin… (2004)

  19. No Access

    Chapter and Conference Paper

    Automated Generation of Dimension Chains for Auto-Body Dimensional Quality Evaluation

    Dimensional quality evaluation is one of essential steps during auto-body early design stage. There are plenty of elements impacting on the variation propagation of assembly process. Dimension chain can addres...

    Jiangqi Zhou, Guanlong Chen, **nmin Lai… in Perspectives from Europe and Asia on Engin… (2004)

  20. No Access

    Chapter and Conference Paper

    Coordination Component Based on Petri Net for Collaborative Design

    Considering the lack of efficient coordination of task interdependencies in the collaborative design system, the temporal and resource coordination mechanisms for respective problems are established based on P...

    Feng Zhou, Hong-Zhong Huang, Xu Zu in Perspectives from Europe and Asia on Engin… (2004)

previous disabled Page of 2