Abstract
Arc welding uses an arc plasma between two metal electrodes to transfer concentrated energy to one of the electrodes, the workpiece, which consists of the metal components to be joined. This leads to partial melting of the workpiece, forming a weld pool. Heat transfer in arc welding is complex, involving four phases of matter (plasma, gas, liquid, and solid) and their interactions. After a brief introduction to the different types of arc welding, the chapter focuses on two of the most important: metal inert-gas/metal active-gas (MIG/MAG) welding and tungsten inert-gas (TIG) welding. Heat transfer in the arc column, between the arc and the electrodes, by droplets of molten metal from the upper electrode, in the molten metal weld pool, and in the solid metal are all considered in detail. The efficiency of the arc welding process is also analyzed. Throughout the chapter, the equations describing the heat transfer processes are presented, and their physical significance is discussed. Detailed consideration is given to the influence of different welding gases and the presence of metal vapor on the heat transfer in the arc column.
Similar content being viewed by others
References
Amakawa T, Jenista J, Heberlein J, Pfender E (1998) Anode-boundary-layer behaviour in a transferred, high-intensity arc. J Phys D Appl Phys 31(10):2826–2834
Baeva M (2017) Non-equilibrium modeling of tungsten-inert gas arcs. Plasma Chem Plasma Process 37(2):341–370
Baeva M, Uhrlandt D, Benilov MS, Cunha MD (2013) Comparing two non-equilibrium approaches to modelling of a free-burning arc. Plasma Sources Sci Technol 22(6):065017
Barrett J, Clement C (1992) Kinetic evaporation and condensation rates and their coefficients. J Colloid Interface Sci 150(2):352–364
Benilov MS, Almeida NA, Baeva M, Cunha MD, Benilova LG, Uhrlandt D (2016) Account of near-cathode sheath in numerical models of high-pressure arc discharges. J Phys D Appl Phys 49(21):215201
Boulos MI, Fauchais P, Pfender E (1994) Thermal plasmas: fundamentals and applications, vol 1. Plenum, New York
Coulombe S, Meunier J-L (1997a) Importance of high local cathode spot pressure on the attachment of thermal arcs on cold cathodes. IEEE Trans Plasma Sci 25(5):913–918
Coulombe S, Meunier J-L (1997b) Thermo-field emission: a comparative study. J Phys D Appl Phys 30(5):776–780
Cram LE (1985) Statistical evaluation of radiative power losses from thermal plasmas due to spectral lines. J Phys D Appl Phys 18(3):401–411
Cressault Y, Rouffet ME, Gleizes A, Meillot E (2010) Net emission of Ar-H2-he thermal plasmas at atmospheric pressure. J Phys D Appl Phys 43(33):335204.
Crowe CT, Sharma MP, Stock DE (1977) The particle-source-in cell (PSI-CELL) model for gas-droplet flows. J Fluids Eng 99(2):325–332
Devoto RS (1967) Simplified expressions for transport properties of ionized monatomic gases. Phys Fluids 10(10):2105–2112
Dinulescu HA, Pfender E (1980) Analysis of the anode boundary layer of high intensity arcs. J Appl Phys 51(6):3149–3157
Goecke SF, Metzke E, Spille-Kohoff A, Langula M (2005) ChopArc. MSG-Lichtbogenschweißen für den Ultraleichtbau. Fraunhofer IRB Verlag, Stuttgart
Guile AE (1971) Arc-electrode phenomena. Proc IEE 118(9R):1107–1130
Haelsig A, Mayr P (2013) Energy balance study of gas-shielded arc welding processes. Weld World 57(5):727–734
Haelsig A, Kusch M, Mayr P (2015) Calorimetric analyses of the comprehensive heat flow for gas metal arc welding. Weld World 59(2):191–199
Haidar J, Farmer AJD (1995) Surface temperature measurements for tungsten-based cathodes of high-current free-burning arcs. J Phys D Appl Phys 28(10):2089–2094
Heberlein J, Mentel J, Pfender E (2010) The anode region of electric arcs: a survey. J Phys D Appl Phys 43(2):023001
Hertel M, Rose S, Füssel U (2016) Numerical simulation of arc and droplet transfer in pulsed GMAW of mild steel in argon. Weld World 60(5):1055–1061
Hirschfelder JO, Curtiss CF, Bird RB (1954) Molecular theory of gases and liquids. Wiley, New York
Hirt CW, Nichols BD (1981) Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys 39(1):201–225
Hu J, Tsai HL (2007) Heat and mass transfer in gas metal arc welding. Part II: the metal. Int J Heat Mass Transf 50(5–6):808–820
Jenista J, Heberlein JVR, Pfender E (1997) Numerical model of the anode region of high-current electric arcs. IEEE Trans Plasma Sci 25(5):883–890
Kim J-W, Na S-J (1995) A study on the effect of contact tube-to-workpiece distance on weld pool shape in gas metal arc welding. Weld J 74(5):141s–152s
Kumar A, DebRoy T (2007) Heat transfer and fluid flow during gas-metal-arc fillet welding for various joint configurations and welding positions. Metall Mater Trans A Phys Metall Mater Sci 38(3):506–519
Lancaster JF (ed) (1986) The physics of welding, 2nd edn. Pergamon, Oxford
Lin Q, Li X, Simpson SW (2001) Metal transfer measurements in gas metal arc welding. J Phys D Appl Phys 34(3):347–353
Liu JW, Rao ZH, Liao SM, Tsai HL (2015) Numerical investigation of weld pool behaviors and ripple formation for a moving GTA welding under pulsed currents. Int J Heat Mass Transf 91(1):990–1000
Lowke JJ, Morrow R, Haidar J (1997) A simplified unified theory of arcs and their electrodes. J Phys D Appl Phys 30(14)2033–2042.
Lowke JJ (2009) Physical basis for the transition from globular to spray modes in gas metal arc welding. J Phys D Appl Phys 42(13):135204
Lowke JJ, Murphy AB (2016) Plasma flows. In: Johnson RW (ed) The handbook of fluid dynamics, 2nd edn. CRC, Boca Raton, pp 18.11–18.26
Lowke JJ, Tanaka M (2006) 'LTE-diffusion approximation' for arc calculations. J Phys D Appl Phys 39(16):3634–3643
McIntosh C, Mendez PF (2017) Experimental measurements of fall voltages in gas metal arc welding. Weld J 96(4):121s–132s
Menart J, Malik S (2002) Net emission coefficients for argon–iron thermal plasmas. J Phys D Appl Phys 35(9):867–874
Menart J, Heberlein J, Pfender E (1996) Theoretical radiative emission results for argon/copper thermal plasmas. Plasma Chem Plasma Process 16(1 Suppl):245s–265s
Mundra K, DebRoy T, Kelkar KM (1996) Numerical prediction of fluid flow and heat transfer in welding with a moving heat source. Numer Heat Transfer A 29(2):115–129
Murphy AB (1995) Transport coefficients of air, argon-air, nitrogen-air, and oxygen-air plasmas. Plasma Chem Plasma Process 15(2):279–307
Murphy AB (1996) A comparison of treatments of diffusion in thermal plasmas. J Phys D Appl Phys 29(7):1922–1932
Murphy AB (1997a) Demixing in free-burning arcs. Phys Rev E 55(6):7473–7494
Murphy AB (1997b) Transport coefficients of helium and argon-helium plasmas. IEEE Trans Plasma Sci 25(5):809–814
Murphy AB (2000) Transport coefficients of hydrogen and argon-hydrogen plasmas. Plasma Chem Plasma Process 20(3):279–297
Murphy AB (2010) The effects of metal vapour in arc welding. J Phys D Appl Phys 43(43):434001
Murphy AB (2013a) Influence of droplets in gas–metal arc welding – a new modelling approach, and application to welding of aluminium. Sci Technol Weld Join 18(1):32–37
Murphy AB (2013b) Influence of metal vapour on arc temperatures in gas–metal arc welding: convection versus radiation. J Phys D Appl Phys 46(22):224004
Murphy AB (2014) Calculation and application of combined diffusion coefficients in thermal plasmas. Sci Rep 4:4304
Murphy AB (2015) A perspective on arc welding research: the importance of the arc, unresolved questions and future directions. Plasma Chem Plasma Process 35(3):471–489
Murphy AB, Arundell CJ (1994) Transport coefficients of argon, nitrogen, oxygen, argon-nitrogen and argon-oxygen plasmas. Plasma Chem Plasma Process 14(4):451–490
Murphy EL, Good RH (1956) Thermionic emission, field emission, and the transition region. Phys Rev 102(6):1464–1473
Murphy AB, Thomas DG (2017) Prediction of arc, weld pool and weld properties with a desktop computer model of metal–inert-gas welding. Weld World 61(3):623–633
Murphy AB, Tanaka M, Tashiro S, Sato T, Lowke JJ (2009a) A computational investigation of the effectiveness of different shielding gas mixtures for arc welding. J Phys D Appl Phys 42(11):115205
Murphy AB, Tanaka M, Yamamoto K, Tashiro S, Satoh T, Lowke JJ (2009b) Modelling of thermal plasmas for arc welding: the role of shielding gas properties and of metal vapour. J Phys D Appl Phys 42(19):194006
Norrish J (ed) (1992) Advanced welding processes. Institute of Physics Publishing, Bristol
Pfender E, Heberlein J (2007) Heat transfer processes and modeling of arc discharges. In: Fridman A, Cho YI, Greene GA, Bar-Cohen A (eds) Transport phenomena in plasma. Advances in heat transfer, vol 40. Academic, New York, pp 345–450
Rao ZH, Zhou J, Liao SM, Tsai HL (2010) Three-dimensional modeling of transport phenomena and their effect on the formation of ripples in gas metal arc welding. J Appl Phys 107(5):054905
Sansonnens L, Haidar J, Lowke JJ (2000) Prediction of properties of free burning arcs including effects of ambipolar diffusion. J Phys D Appl Phys 33(2):148–157
Schnick M, Fussel U, Hertel M, Spille-Kohoff A, Murphy AB (2010) Metal vapour causes a central minimum in arc temperature in gas-metal arc welding through increased radiative emission. J Phys D Appl Phys 43(2):022001
Schnick M, Hertel M, Fuessel U, Uhrlandt D (2013) Energy balance in MIG arcs. J Phys D Appl Phys 46(22):224002
Shirvan AJ, Choquet I (2016) A review of cathode-arc coupling modeling in GTAW. Weld World 60(4):821–835
Siewert E, Schein J, Forster G (2014) Determination of enthalpy, temperature, surface tension and geometry of the material transfer in PGMAW for the system argon–iron. J Phys D Appl Phys 46(22):224008
Tanaka M, Lowke JJ (2007) Predictions of weld pool profiles using plasma physics. J Phys D Appl Phys 40(1):R1–R23
Tanaka M, Yamamoto K, Tashiro S, Nakata K, Yamamoto E, Yamasaki K, Suzuki K, Murphy AB, Lowke JJ (2010) Time-dependent calculations of molten pool formation and thermal plasma with metal vapour in gas tungsten arc welding. J Phys D Appl Phys 43(43):043009
Tashiro S, Tanaka M, Ushio M, Murphy AB, Lowke JJ (2006) Prediction of energy source properties of free-burning arcs. Vacuum 80(11–12):1190–1194
Uhrlandt D (2016) Diagnostics of metal inert gas and metal active gas welding processes. J Phys D Appl Phys 49(31):313001
Voller VR, Prakash C (1987) A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int J Heat Mass Transf 30(8):1709–1719
Wu CS, Dorn L (1994) Computer simulation of fluid dynamics and heat transfer in full-penetrated TIG weld pools with surface depression. Comput Mater Sci 2(2):341–349
Wu CS, Chen J, Zhang YM (2007) Numerical analysis of both front- and back-side deformation of fully-penetrated GTAW weld pool surfaces. Comput Mater Sci 39(3):635–642
Yamamoto K, Tanaka M, Tashiro S, Nakata K, Yamazaki K, Yamamoto E, Suzuki K, Murphy AB (2008) Metal vapour behaviour in thermal plasma of gas tungsten arcs during welding. Sci Technol Weld Join 13(6):566–572
Yokomizu Y, Matsumura T, Henmi R, Kito Y (1996) Total voltage drops in electrode fall regions of SF6, argon and air arcs in current range from 10 to 20000 A. J Phys D Appl Phys 29(5):1260–1267
Zhang W, Kim C-H, DebRoy T (2004) Heat and fluid flow in complex joints during gas metal arc welding - part I: numerical model of fillet welding. J Appl Phys 95(9):5210–5219
Zhou X, Heberlein J (1994) Analysis of the arc–cathode interaction of free-burning arcs. Plasma Sources Sci Technol 3(4):564–574
Zhu P, Morrow R, Lowke JJ (1992) A unified theory of free burning arcs, cathode sheaths and cathodes. J Phys D Appl Phys 25(8):1221–1230
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Section Editor information
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this entry
Cite this entry
Murphy, A.B., Lowke, J.J. (2017). Heat Transfer in Arc Welding. In: Kulacki, F. (eds) Handbook of Thermal Science and Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-32003-8_29-1
Download citation
DOI: https://doi.org/10.1007/978-3-319-32003-8_29-1
Received:
Accepted:
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-32003-8
Online ISBN: 978-3-319-32003-8
eBook Packages: Springer Reference EngineeringReference Module Computer Science and Engineering