Highlights
-
We summarize the recent advances of transition metal basic salts and their application in oxygen evolution reaction (OER) and further overall water splitting.
-
The structure evolution of transition metal basic salts during OER and the impact of F−, Cl−, CO32− and NO3− on the OER performance are highlighted
Abstract
Electrocatalytic oxygen evolution reaction (OER) has been recognized as the bottleneck of overall water splitting, which is a promising approach for sustainable production of H2. Transition metal (TM) hydroxides are the most conventional and classical non-noble metal-based electrocatalysts for OER, while TM basic salts [M2+(OH)2-x(Am−)x/m, A = CO32−, NO3−, F−, Cl−] consisting of OH− and another anion have drawn extensive research interest due to its higher catalytic activity in the past decade. In this review, we summarize the recent advances of TM basic salts and their application in OER and further overall water splitting. We categorize TM basic salt-based OER pre-catalysts into four types (CO32−, NO3−, F−, Cl−) according to the anion, which is a key factor for their outstanding performance towards OER. We highlight experimental and theoretical methods for understanding the structure evolution during OER and the effect of anion on catalytic performance. To develop bifunctional TM basic salts as catalyst for the practical electrolysis application, we also review the present strategies for enhancing its hydrogen evolution reaction activity and thereby improving its overall water splitting performance. Finally, we conclude this review with a summary and perspective about the remaining challenges and future opportunities of TM basic salts as catalysts for water electrolysis.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
Along with the intensification of industrial production and social activities, the demand of human society for energy has never been so large as today [1,2,3,4,5]. However, the primary source of energy supply continues to rely on the unrenewable fossil fuels that are pretty scarce in reserves [6,7,8,9,10,11]. Thus, the energy issues caused by the depletion of fossil fuels certainly will give a rise to the huge demand for the clean energy [12,13,14,15,95,96,97, Transition metal basic salts for OER and overall water splitting
2 Structure of Transition Metal Basic Salts
Transition metal basic salts are defined as salt compounds composed of transition metal cations and hydroxide anions (OH−), in which part of OH− are replaced by other anions formed from the strong monoprotic acids or the weak diprotic acid. Thus, transition metal basic salts show very poor tolarance to acid solution, and can only be used in alkaline and neutral conditions. In general, it can be normally formulated as M2+(OH)2-x(Am−)x/m · nH2O [100,101,102], where the M2+ represents the transition metal cations (Fe2+, Co2+, Ni2+, etc.), and the Am− stands for the anions of acids, such as CO32−, NO3−, F−, Cl−, SO42−, SeO42− and CH3COO− [103,104,105,106,107,108,109]. We mainly focus on the four type of metal basic salts (CO32−, NO3−, F−, Cl−) that have been developed as pre-catalysts for OER.
Most transition metal basic salts, but not all of them, are considered to have layered structure. The structures of transition metal basic salts containing ions of NO3−, Cl−, CO32−, or F− are described detailed below. (1) Transition metal basic salt consisting of NO3− has a formula of M2(OH)3NO3, which is also known as transition metal nitrate hydroxides (TMNHs) [110]. This type of basic salts have two distinct structures [111]. For the single layered M2(OH)3NO3, its structure consists of brucite-like M(OH)2 layers, where 1/4 of oxygen atoms belong to nitrate groups [112] and the octahedral sites are singly occupied by the divalent metal ions (Fig. 2a). The structure of the double-layered M7(OH)12(NO3)2 has not been reported. Divalent metal ions are assumed to be coordinated with octahedral and tetrahedral oxygen atoms in the postulated structure. (2) Transition metal fluoride hydroxides (TMFHs) have a formula of M(OH)F, which show similar electronic structure and the electrochemical properties with metal hydroxides-based semiconductors due to its inherent structure (Fig. 2b) [105]. (3) TM carbonate hydroxides (TMCHs) are a kind of layered hydroxide salts, consisting of positively charged cations and intercalated anions in the interlayer region [113, 114]. In transition metal carbonate hydroxides, the M ions coordinate with two oxygen atoms from CO32− and four OH− ions to form distorted octahedron with (4 + 2) coordination (Fig. 2c) [115]. (4) Transition metal oxychlorides (such as Co2(OH)3Cl) are known as TMClHs due to the existence of Cl−. It presents a pyrochlore-like hexagonal structure with Co2+ occupying its octahedral sites (Fig. 2d) [116, 117]. Among the above basic salts, carbonate and nitrate hydroxides possess typical layered structure, which not only assists the mass transfer and ions migration between the electrode and electrolyte [29], but also provides large surface area that generates ample accessible active sites toward OER [118]. Besides, the above-mentioned transition metal basic salts can be prepared at facile conditions. For instance, the transition metal basic salts with CO32−, NO3−, F−, Cl− can be prepared via typical solvothermal method at 90 ~ 180 °C [105, 119,120,121], in which the type of anion can be controlled by using corresponding precursor or inducing agent [119, 122]. Of note is that MNH can also be obtained through molten salt decomposition of corresponding MNO3 at 85 ~ 140 °C [123]. Thus, it is of great importance to develop transition metal basic salts as pre-catalyst for OER.
Crystal structure of a Co2(OH)3NO3, b Co(OH)F, c Co2(OH)2CO3, and d Co2(OH)3Cl
3 Transition Metal Basic Salts for OER
This section is further divided into four parts according to the kind of anion, because it is generally acknowledged that anion type is regarded to determine the property and catalytic performance of transition metal basic salts. In this section, the effect of anion on the OER performance is a key point. Of note is that transition metal basic salts undergo partially or even fully oxidation during OER, so we mainly discuss the views about the anion effect which take the structure evolution into consideration.
3.1 Cl−
Song et al. first developed Co2(OH)3Cl as a pre-catalyst for OER (Fig. 3a), and further carried out a comprehensive study for the activation and structure evolution process during OER [124]. The authors discovered that Co(II) in Co2(OH)3Cl was converted to Co(III) at the first 100 cyclic voltammetry (CV) cycles (Fig. 3b), and Cl− was dissolved into the electrolyte (Fig. 3c). Simultaneously, the OER performance improved continuously during the first 100 CV cycles (Fig. 3d), indicating that the activation of Co2(OH)3Cl was originated from plenty of structural defects (Fig. 3e). In fact, Co2(OH)3Cl was found to fully oxidized to CoOOH after the OER process. An important contribution of this work is that the authors employed a series of operando spectroscopic methods such as X-ray absorption spectroscopy (XAFS) to directly show the structure evolution of Co2(OH)3Cl during OER (Fig. 3f). As a result, the coordinatively unsaturated Co sites resulted from the Cl− leaching were demonstrated to be responsible for the outstanding OER performance. In our view, Song et al. not only provide a self-consistent explanation for the anion effect of transition metal basic salt-based OER pre-catalysts, but also contribute to the methodology for understanding the activation mechanism for other kinds of OER pre-catalysts.
Reproduced with permission from Ref. [124]. Copyright 2019, Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim. g Schematic illustration of the Fe modification to Co2(OH)3Cl. h LSV curves of oxygen reduction reaction before (solid line) or after 500 CV cycles (dashed line) in O2-saturated 1 M KOH (negative scan). i LSV curves of the Fe modified Co2(OH)3Cl. Reproduced with permission from Ref. [125]. Copyright 2020, Elsevier Inc
a Crystal structure of Co2(OH)3Cl. b CV curves of 100 cycles in 1.0 M KOH with a scan rate of 100 mV s−1. c Optical photos for the detection of Cl− in electrolyte with the increase of the CV cycles. d LSV curves with the increase of the CV cycles. Scan rate: 5 mV s−1. e STEM image of the AC-Co2(OH)3Cl. f Fourier-transformed Co K-edge EXAFS spectra and corresponding fitting curves for the activation derived-Co2(OH)3Cl.
Regulating surface states and electronic structures of transition metal basic salts through elemental do** has been believed as a valid strategy to improve its OER activity. For example, Hong and his co-workers further enhanced the OER activity of Co2(OH)3Cl through the modification of small amount Fe elements (Fig. 3g) [125]. By comparing the integral areas of O2 reduction reaction peaks in LSV curves (Fig. 3h), the author demonstrated that do** Fe into the Co2(OH)3Cl lattices with moderate amount facilitated the etching of surface lattice Cl− and created more surface vacancies to absorb oxygen species. Besides, the modification of Fe led to a moderate surface oxygen adsorption affinity, which is favorable to activate the intermediate oxygen species. These merits made the activated sample show good quality OER activity, achieving a low overpotential of 273 mV at 10 mA cm−2 (Fig. 3i).
3.2 F−
The pioneering work for Co(OH)F-based OER pre-catalyst was reported by Cao and his co-workers [105]. As shown in Fig. 4a, b, the authors developed an elegant synthetic strategy to fabricate hierarchical 3D Co(OH)F microspheres with 2D nanoflakes woven by single-crystal 1D nanorods. This unique superstructure endowed the Co(OH)F pre-catalyst with the virtues of all dimensions (1D, 2D and 3D), including facilitated mass and charge transfer and enlarged electrochemical active surface area. This led to remarkable OER activity of the 3D Co(OH)F catalyst, requiring an overpotential of 313 mV to deliver a current density of 10 mA cm−2 (Fig. 4c), which was significantly lower than other kinds of Co(OH)F pre-catalyst as well as Co(OH)2. Impressively, the authors noticed the structure evolution of Co(OH)F during OER and provided a self-consistent explanation for the effect of F−, even if this was one of the earliest works in this field. Specifically, the author discovered that the surface of Co(OH)F was oxidized to CoIII/CoIV through CV test and XPS (Fig. 4d), while the bulk phase kept unchanged, which was different from the behavior of Co2(OH)3Cl. The authors used a core–shell model to explain the effect of F− on the different OER performance between Co(OH)F and Co(OH)2. The theoretical calculations indicated that the F− ions in Co(OH)F led to higher conductivity and charge mobility than those of Co(OH)2 (Fig. 4e). It should also be pointed out that other factors such as the adsorption of F-, surface defects and different valence state of Co cannot be excluded. Nevertheless, it is no doubt that the synthetic strategy and the reasonable core–shell explanation of this work paves a way for TM basic salt-based OER pre-catalysts. After this pioneering work, Cao’s group further investigated the impact of phase transition on Co(OH)F, and employed Co(OH)F as template to synthesize CoO and CoP for OER [126, 127].
Reproduced with permission from Ref. [105]. Copyright 2017, Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim
a Schematic of the growth and substructures, b SEM image of the hierarchical 3D Co(OH)F microspheres. c CVs of the Co-based pre-catalysts. d CV current–potential responses of the Co(OH)F sample at different scan rates: 0.5 V s−1 (azure), 1 V s−1 (green), 2 V s−1 (red), 3 V s−1(purple), 4 V s−1 (blue), and 5 V s−1 (brick red). e Calculated densities of states of Co(OH)F.
Both cation and anion do** methods are used to improve the OER activity of Co(OH)F [128, 129]. For example, Li and co-workers prepared ultralong needle-like N-doped Co(OH)F/carbon fiber paper (CFP) for OER through one-step hydrothermal method (Fig. 5a) [130]. The incorporation of N resulted in more oxygen vacancies in Co(OH)F and thus obtained higher activity for OER (Fig. 5b). Yang and his co-workers reported Co(OH)F nanoarray with P and Y co-do** and supported on nickel foam (NF) for alkaline OER [131]. The do** of P and Y led to higher electron density of Co species. As a result, only a low overpotential of 238 mV required by YP-Co(OH)F electrode to reach an OER current density of 10 mA cm−2 (Fig. 5c). The OER performance of these works are very appealing, but it is a pity that the investigation of structure-performance relationship based on fresh pre-catalysts rather than used electrocatalysts or even in-situ observation.
Reproduced with permission from Ref. [130]. Copyright 2018, Royal Society of Chemistry. c LSV curves of Co(OH)F, P-Co(OH)F, YP-Co(OH)F, and IrO2 for OER in 1 M KOH. Reproduced with permission from Ref. [131]. Copyright 2019, Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim. d Schematic diagram of the sulfur atom replacing the fluorine atom. e The formation energy of Co1−xS/Co(OH)F and Co(OH)F from DFT calculation. f DOS curves of Co(OH)F/CC and Co1−xS/Co(OH)F/CC. g Schematic of Co1−xS/Co(OH)F sample improving the OER activity. h OER LSV curves of Co1−xS/Co(OH)F sample with a scan rate of 20 mV s−1 and 80% iR correction. Reproduced with permission from Ref. [132]. Copyright 2022, American Chemical Society. i LSV curves of the as-prepared β-Co(OH)2, Co(OH)F, and β-Co(OH)2/Co(OH)F hybrid. Reproduced with permission from Ref. [133]. Copyright 2018, Elsevier Ltd
a Schematic representation of the growth process of the 3D needlelike N:Co(OH)F array structure on CFP. b LSV curves of the N:Co(OH)F and series comparison samples.
Construction of heterostructure is another conventional strategy for enhancing the OER performance of transition metal basic salts. Very recently, Wang et al. fabricated needle-like Co1-xS/Co(OH)F heterostructure on carbon fiber cloth (CC) for OER through atomic substitution strategy (Fig. 5d) [132]. The easy replacement of F by S atoms caused lattice distortion to increase active sites, as well as optimized the adsorption (OH−) and desorption (O2) energy during OER (Fig. 5e). Meanwhile, due to the tip-enhanced local electric field effect from needle-like structure and favorable electron transfer (Fig. 5f, g), the Co1−xS/Co(OH)F/CC catalyst showed good OER activity of 269 mV to deliver 10 mA cm−2 (Fig. 5h). Besides, Cao and his co-workers gave a β-Co(OH)2/Co(OH)F hybrid by making Co(OH)F nanorods grow along β-Co(OH)2 hexagon edges as lateral branches [133]. Due to the unusual epitaxial growth and the efficient mass/charge diffusion, the obtained catalyst of β-Co(OH)2/Co(OH)F exhibits high-quality reaction activity with a low overpotential of 329 mV to deliver an OER current density of 10 mA cm−2 (Fig. 5i). In addition to as OER active phase, TM basic salts can be used to stabilize noble metal OER catalysts. For instance, Cho and co-workers used 3D hierarchical Co(OH)F nanosheet arrays as support for Ru single atom catalyst [134]. The Ru SAs/Co(OH)F only needed a low overpotential of 200 mV to drive a current density of 10 mA cm−2. The author claimed that the robust electronic coupling between Ru single atom and Co(OH)F prevented the oxidation of Ru to RuO42−, leading to outstanding activity and durability.
3.3 CO3 −
As mentioned above, TMCHs are a kind of hydroxide salts with layered structure. Such unique structure makes the materials have abundant redox properties and show high accessibility to electrolyte [118], which provides a favorable opportunity for highly efficient electrocatalytic oxygen evolution. In fact, TMCHs-based OER pre-catalysts are the most conventional ones among all the TM basic salts.
The pioneer work of TMCHs-based OER pre-catalysts was performed by Lin and her co-workers at 2014 [91]. 3D hierarchical CoCH with favorable hollow urchin-like structure was fabricated on FTO through hydrothermal method. The catalytic performance is not good enough by current standard (466 mV @ 10 mA cm−2), but this work paves the way for a new kind of OER pre-catalyst. Up to now, a great number of works have been reported for TMCHs as pre-catalysts for OER [135,136,137,138,96]. It has been shown that Mn do** can regulate the nanosheet morphology of CoCH to expose more accessible active sites, as well as make the electron transfer from Mn to Co and thus tune the electronic structure (Fig. 6b). As a result, the optimal CoMnCH/nickel foam (NF) electrode material displayed an unprecedented electrocatalytic OER activity, only requiring a pretty low overpotential of 294 mV to drive a current density of 30 mA cm−2 (Fig. 6c). Besides, CoMnCH/NF was also developed as catalyst for overall water splitting for the first time in this work. In our view, the work by Hu’s group is a milestone in this area, which strongly arouses the researchers’ interest in TM basic salts-based OER pre-catalysts. Afterwards, plenty of transition metal elements such as Fe [118, 143], Ni [144,145,146], W [147], Cu [91] and Cr [148] have been doped into CoCH. Very recently, CoCH with dual dopant such as NFe [149] has also been reported to get improved OER activity. We summarize the OER performance of these works in Table 1. However, the present works usually report one or two kinds of do** element, so there is some variation in the condition of electrochemical test and the property of pure CoCH. Therefore, the question about the best dopant should be systematically investigated by one group, and the structure evolution of CoCH during OER should be considered for the explanation for the trend of performance.
Reproduced with permission from Ref. [96]. Copyright 2017, American Chemical Society. d Schematic illustration of psCoFeCH. e HRTEM image (inset: enlarged HRTEM image) of psCoFeCH. f OER LSV curves of CoFeCH, psCoFeCH, osCoFeCH, and the NF substrate. Reproduced with permission from Ref. [150]. Copyright 2019, Royal Society of Chemistry. g Schematic illustration of the hierarchical Cu(OH)2@CoNiCH core/shell NTs grown on CF. Reproduced with permission from Ref. [Full size table
The heterostructures of TMCHs and another material such as metal oxides, (oxy)hydroxides, oxysalts, sulfides, carbon nanomaterials and even noble metal nanoparticles have been reported as pre-catalysts for OER. Bimetallic TMCHs are also used to obtain outstanding OER performance. After reporting the CoMnCH system, Wan and Hu’s group further constructed a CoFe carbonate hydroxide and metal sulfide heterostructure (MS/MCH) through partial sulfurization of MCH (Fig. 6d, e) [150]. The author demonstrated that the unique “nanoparticle-in-nanosheet” structure made the electron transfer from MS to CoFeCH, leading to enhanced intrinsic activity (226 mV@10 mA cm−2) and durability for OER (Fig. 6f). Another point of interesting is that this electrode material can also reach an industrial current density of 1,000 mA cm−2 at a low overpotential of 367 mV, which is crucial for industrial application. Sun et al. developed core–shell hierarchical Cu(OH)2@CoNiCH/CF pre-catalyst for OER (Fig. 6g) [98]. Although Co(OH)2 itself isn’t an active material for OER, the faster electron transport at interface and easier accessibility of water made the electrode show excellent activity with 288 mV to drive an OER current density of 10 mA cm−2. After this work, Sun’s group further interspersed Pd on it to enhance the OER performance, which might be resulted from the electron transfer between Pd and the Cu(OH)2@CoNiCH/CF pre-catalyst [151]. For TMCHs-carbon material, Liu and co-workers prepared NiFeCH-carbon nanotubes and graphite (CNT/G) composite that NiFeCH embedded in carbon nanotubes and graphite [152]. The CNT/G in such compound enhanced the conductivity and combination between CNT/G and NiFeCH. Meanwhile, the special sandwich morphology (Fig. 6h) enabled more exposed active sites. All these merits caused improved OER performance, requiring 300 mV to deliver 10 mA cm−2 (Fig. 6i). As seen from these works, TMCHs-based heterostructures usually exhibit outstanding catalytic performance for OER. However, the structure evolution during OER becomes more complex due to multiple components, and therefore most works discuss the structure-performance relationship with the fresh heterostructure directly. In our view, the above-mentioned synergetic effects (e.g., electron transfer) should also exist in the after-reaction electrocatalysts, and researchers can probe them by using elaborate control experiments and thus provide a more convincing explanation.
3.4 NO3 2−
Although TMNHs also have abundant M–O bonds like TMCHs and thus are recognized as potential extraordinary pre-catalysts for OER, synthesis of TMNHs used to be a problem, as classical solvothermal methods have just been develop for TMNHs very recently [153].
To overcome this obstacle, our group came up with a novel molten salt decomposition method to fabricate multiple metal nitrate hydroxides (MNH, M = Ni, Co and Cu) on NF as OER pre-catalysts in alkaline media (Fig. 7a, b) [154]. This unique method utilizes the conversion of M(NO3)2 to MNH when the temperature reaches to the melting point, in which the molten nitrate is the only chemical regent involved in reaction process. The NiNH/NF showed the best OER performance among the three MNH/NF electrodes, which drove a catalytic current density of 50 mA cm−2 at an ultralow overpotential of 231 mV (Fig. 7c). After OER process, we found that the surface of NiNH and CoNH was oxidized to NiOOH and CoOOH, respectively, while the surface of CuNH was transferred to CuO. The generated metal oxyhydroxide or oxide was believed as true catalytically active species. Simultaneously, NO3− could not be detected on the catalysts’ surface after carefully washing (Fig. 7d). However, recent report in this area indicated that the NO3− would be dissolved into the electrolyte and adsorbed on the surface of MNH again, which was believed to facilitate the OER performance [155].
Reproduced with permission from Ref. [154]. Copyright 2018, Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim. e Schematic illustration of the synthesis of NiNH@Fe(OH)3/NF by immersing NiNH/NF in Fe(NO3)3·9H2O ethanol solution. f OER electrocatalytic properties of NiNH@Fe(OH)3/NF materials in 1 M KOH solution. Reproduced with permission from Ref. [160]. Copyright 2020, American Chemical Society. g Schematic illustration of the fabrication procedure of Mo-NiNH on MNF substrate through molten salt decomposition strategy. h Polarization curves of Mo-NiNH @/MNF samples in 1 M KOH. Reproduced with permission from Ref. [161]. Copyright 2022, Elsevier Inc
a Schematic illustration of the fabrication procedure of MNH/NF through molten salt decomposition method for OER. b SEM image of NiNH/NF. c LSV curves of MNH/NF samples and NF (after iR correction). d Raman spectra in comparison with NiNH/NF before and after OER.
Considering the extraordinary OER performance of NiNH/NF, it is not surprised to have the follow-up works about metal do** and heterostructure. Fe- and Ni-based materials are well known as a great couple for OER [156,157,158,159]. Therefore, our group further fabricated amorphous Fe(OH)3 on NiNH/NF electrode to push forward its OER performance (Fig. 7e) [160]. As a result, the NiNH@Fe(OH)3 core@shell structure facilitated the charge transfer and built highly active Fe–Ni sites at the interface, leading to enhanced OER performance of 212 mV to drive a current density of 100 mA cm−2 (Fig. 7f). Chai et al. successfully prepared Mo-doped NiNH by simply replacing Ni foam with MoNi alloy foam (MNF) (Fig. 7g) [161]. The high valent Mo dopant effectively created defects and enlarged surface area, leading to high performance for OER (Fig. 7h). In our view, the NiMoNH/MNF electrode might possess great potential for the excellent performance for HER, because NiMo-based materials are almost the best non-noble metal-based HER catalysts to our best of knowledge. Dong et al. introduced B and Fe dopant into NiNH by submitting FeB supported on iron foam (IF) into molten nitrate [104], leading to a crystalline-amorphous structure and thus improved OER performance.
As is discussed above, it is widely accepted that metal basic salts can be fully (CoClH) or partially converted to corresponding metal oxyhydroxides during OER, which is the real active center for OER. Understanding the impact of the anions (i.e. Am−) is drastically important for the rational design of the novel pre-catalysts. Taking the partially oxidized situation as an example, we have summarized the plausible anion effects for metal basic salts-based OER pre-catalysts in Fig. 8. On one hand, the oxidation of basic salts to MOOH is along with the leaching of Am− to electrolyte, leaving the corresponding vacancies on the surface of catalysts. Simultaneously, the dissolved Am− adsorbed on the surface of MOOH may influence on the adsorption of OER intermediate, which have been reported in metal sulfides and selenides pre-catalysts. On the other hand, metal basic salts in the core may not only provide higher conductivity than the hydroxide counterparts, but also affect the electronic structure of MOOH shell and further the OER performance. If theoretical calculations are employed to understand the anion effect, the factors of core–shell structure or vacancies or adsorption of anions should be considered for the corresponding effect.
Schematic of structural evolution and anion effects for transition metal basic salts
4 Transition Metal Basic Salts for Water Splitting
Compared to the single-function electrocatalysts, develo** bifunctional catalysts that are simultaneously efficient for HER and OER remains challenging, but will be more appealing in practical applications. Transition metal basic salts are among the most promising non-noble metal-based pre-catalysts for OER, so it is of great value to investigate their catalytic activity towards HER to obtain catalysts for overall water splitting. Moreover, it is reasonable to speculate that metal basic salts can facilitate HER and further water dissociation in alkaline and medium solution due to their similar structure to metal hydroxides [149, 162].
To the best of our knowledge, there has no report about pure transition metal basic salts for HER and overall water splitting due to its poor instrinsic activity. However, modification strategies including but not limited to design of morphology/dimension [163, 164], modulation of electronic structure [147, 165], and interface engineering [95, 166, 167] have been introduced to improve the HER activity of metal basic salts. As a result, bimetallic and hetero-structured basic salts were employed as HER and further water splitting catalysts. In this part, recent advances of the modified transition metal basic salts toward these two topics are summarized and discussed in detail.
4.1 Elemental Do**
As mentioned in Sect. 3.3, Hu et al. first reported CoMnCH/NF for HER and overall water splitting. Although CoMnCH/NF with optimized Co:Mn ratio still required 180 mV to deliver a current density of 10 mA cm−2 for HER, which showed the possibility that TM basic salts can serve as catalyst for HER. Of note is that the catalyst exhibited good performance for overall water splitting (1.68 V @ 10 mA cm−2) thanks to its outstanding OER performance. In 2018, Li and his co-workers reported FeCoCH nanoarrays supported on NF as an excellent bifunctional catalyst for overall water splitting. The catalyst only needed 77 and 228 mV to deliver 10 mA cm−2 for HER and OER, respectively (Fig. 9a, b) [118]. Benefited from the high HER and OER activity, the electrolyzers only required a cell voltage of 1.45 V to drive identical current density (Fig. 9c), which is the best among non-noble metal-based catalysts for overall water splitting. After demonstrating the successfully do** of Fe into CoCH, the authors further found that the presence of strong coupling interactions and electron transfer between Fe, Co and O (Fig. 9d). By using density functional theory (DFT) calculations, the authors attributed the better HER performance of FeCoCH than CoCH to the moderated adsorption strength of H+ with catalyst surface. Moreover, W doped CoCH [147], and Co doped FeNiCH [168] have been reported as well due to the good performance for water splitting.
Reproduced with permission from Ref. [118]. Copyright 2018, Wiley–VCH Verlag GmbH & Co. KGaA, Weinheim. Backward CV of sheet-like NiFeCH and Rh3+-NiFeCH toward e HER and f overall water splitting. Reproduced with permission from Ref. [169]. Copyright 2020, Royal Society of Chemistry
Polarization curves of various FeCoCH/NF samples for a HER, b OER and c overall water splitting. d The number of electrons in the 3d orbital per Co atom in CoCH and FeCoCH of Mo-NiNH @/MNF samples in 1 M KOH.
Of note is that though the HER performance of basic salts has been significantly enhanced through non-noble metal do**, there is still huge gap in performance compared to commercial Pt/C catalyst. Do** noble metal elements into transition metal basic salts can obtain overwhelming HER response. Kundu et al. have reported another Rh3+-NiFeCH for high-rate water electrolysis [169]. They claimed that the introduction of noble metal Rh3+ stabilized the NiFeCH systems and thus improved the inefficient HER kinetics, leading to a low overpotential of 36 mV to deliver a HER current density of 50 mA cm−2 (Fig. 9e). When employing NiFeCH as anode and Rh3+-NiFeCH as cathode, Rh3+ introduction easily induced the HER kinetics, decreasing the overall cell voltage remarkably. And hence, an overpotential of 286 mV was required to drive a current density of 50 mA cm−2 (Fig. 9f). Although noble metal do** can achieve excellent HER activity, it is essential to find a balance to combine noble metal and basic salts by considering the high cost of noble metal.
4.2 Construction of Heterostructure/Composites
Besides for tuning the intrinsic HER activity of TM basic salts, another effective strategy is to build heterostructure of the TM basic salts and catalytic materials for HER and water splitting. On the one hand, a reasonable idea is to construct heterostructure of metal basic salts and typical HER-active materials such as Pt-group metal nanoparticles, metal sulfides, nitrides, carbides. On the other hand, some inert materials for HER may also be useful because they can tune the physical and chemical properties of basic salts to enhance their activity. Another question in this part is how to build the heterostructure of metal basic salts and the diverse HER active species, some of which containing low-valence metal species. Therefore, we not only discuss the relationship between structure-HER performance in detail, but also review the synthetic methods briefly.
Noble metal nanoparticles and metal basic salts should be a good couple for overall water splitting in alkaline solution, because it facilitates to the adsorption and desorption of atomic hydrogen and water dissociation. Ma and her co-workers deposited Ru on carbon fiber (CF)-supported CoCH to accelerate alkaline HER (Fig. 10a) [170]. The author showed that the CoCH reduced the energy barrier of water dissociation while Ru enabled to promote the formation of hydrogen gas (Fig. 10c). Thus, the synergistic effect between Ru nanoparticles and CoCH (Fig. 10b) improved the HER activity, requiring 66 mV to reach 10 mA cm−2. Very recently, Lee et al. fabricated Pt single atom (SA) on 2D NiHN via molten salt method followed by dip** the NiNH into 1 mM solution of H2PtCl6 [171]. The PtSA-2D NiHN catalyst exhibited outstanding performance for HER (24 mV at 10 mA cm−2), OER (280 mV at 50 mA cm−2) and overall water splitting (1.45 V at 10 mA cm−2). The authors employed powerful theoretical calculations to explain the intrinsic HER activity of the PtSA-2D NiHN catalyst. According to the calculated ΔGH*, the adsorption of H* on Ni sites in bare NiNH was too weak. Once Pt SA was added, the adsorption of H* on Ni sites is significantly strengthened, making the Ni sites in PtSA-2D NiHN as the active sites for HER. Pt SA, known as robust active sites for HER, possessed too strong adsorption of H* in this work. Moreover, the authors further investigated the anion effect for HER. They discovered that the well achieved ΔGH* closer to 0 for the PtSA-2D NiHN was also correlated to the NO3−, because the ΔGH* for Pt SA/NiOH (marked as NiH in this work) is much lower, indicating an extremely strong of H* intermediate. The NO3− in PtSA-2D NiHN could adjust the bonding electron density and further the adsorption of H* and finally the HER performance. In our view, this work is a milestone for metal basic salts-based catalysts for overall water splitting, because the authors not only report a catalyst with outstanding catalytic performance for HER and further overall water splitting, but also well establish the structure-performance relationship through powerful theoretical calculations and successfully guide the design of future electrocatalysts. Besides, FeNi alloy quantum dot@CoCH/NF has also been reported [172]. Considering the high-price of noble metal-based materials, it is cost-effective to combine TM basic salts and non-noble metal-based catalysts for HER. For example, Luo and co-workers synthesized a 3D hierarchical hetero-structured Cu3N@CoNiCHs@copper foam (CF) electrode material through hydrothermal method to be efficient catalyst for overall water splitting [173]. The interaction between Cu3N (with better HER activity) and CoNiCH generated electron deficient Co sites in CoNiCH and electron rich Cu sites in Cu3N (Fig. 10f), which were favorable to synergistically enhance the OER and HER activity, respectively. Given this reason, the Cu3N@CoNiCHs@CF electrode required a low cell voltage of 1.58 V to reach 10 mA cm−2. Besides, Song and co-workers reported a hetero-structured NiCoSx@CoCH catalyst through a process of sulfurization at room temperature (Fig. 10g) [166]. The obtained NiCoSx/CoCH/NF electrode displayed excellent HER performance due to the improved water adsorption and splitting kinetics (Fig. 10h, i). Furthermore, sulfured NiCoCH/NF [163], Se nanoparticles modified CoCH with in-situ generated Co-Se [174], and graphdiyne (GDY) modified FeCH [165] have also shown superior HER activity because of the introduction of proper components. However, the overall water splitting performance of these catalysts is not measured. Considering the enhanced HER activity and the intrinsically good OER activity of TM basic salts, we believe that these materials listed above can have promising activity toward overall water splitting.
Reproduced with permission from Ref. [170]. Copyright 2019, Elsevier Itd. d ΔGH* values at different sites on surface 2D NiHN and PtSA-2D NiHN models towards HER at different sites on their surface. e ΔGH* comparison between PtSA-2D NiHN and PtSA-2D NiH models (inset: corresponding catalyst models). Reproduced with permission from Ref. [171]. Copyright 2022, Elsevier B.V. f Gibbs free energy diagram at 1.23 V for OER over Cu3N and Cu3N@CoNiCHs. Reproduced with permission from Ref. [173]. Copyright 2021, Elsevier B.V. g Schematic illustration of the fabrication procedure of NiCoSx@CoCH NAs/NF. h Calculated adsorption energies of H* and H2O* for CoCH, NiCoSx, and NiCoSx@CoCH. i Polarization curves of NF, Ni@CoCH NAs/NF, NiCoSx@ CoCH NAs/NF, and Pt/C (20 wt%). Reproduced with permission from Ref. [166]. Copyright 2021, American Chemical Society
a Schematic illustration for the fabrication procedures and b synergistic effect of CF@Ru-CoCH samples. c Free energy diagram of the Volmer-Tafel and Volmer-Heyrovsky pathways for HER in alkaline electrolyte for CF@Ru-CoCH.
Inert materials for HER, such as metal oxides and hydroxides, can behave as efficient promoters to enhance catalytic activity toward OER and overall water splitting. For instance, Wang and his co-workers demonstrated a hierarchical core–shell structured MnCo-CH@NiFe-OH pn junction catalyst by electrodeposited method and employed it to overall water splitting (Fig. 11a) [175]. It is demonstrated that the contract of HER active MnCo-CH and OER active NiFe-OH led to a band bending, which widened the gap between the valence band of MnCo-CH and theoretical HER potential, significantly promoting electron transfer for generating H2. Meanwhile, the positively charged NiFe-OH was considered to facilitate the transfer and adsorption of OH− to boost OER activity (Fig. 11b). DFT results further indicated that the desorption of H atom from adsorbed OH* (rate-limiting step, ΔG2) can be influenced by the formation of pn junction, which made it easier to release H atom (Fig. 11c). Therefore, with both enhanced HER and OER activity, a low cell voltage of 1.69 V was obtained to drive a current density of 100 mA cm−2 (Fig. 11d). Moreover, Wang et al. fabricated hetero-structured Co(OH)F@CoFe-LDH/NF catalyst via a facile two-step approach and used to overall water splitting (Fig. 11e, f) [95]. The author declared that the synergistic effect at the interface that generated by covering CoFe-LDH nanosheets on Co(OH)F nanorod was favorable to catalytic activity. Thus, the Co(OH)F@CoFe-LDH/NF electrode displayed superior electrocatalytic activity, achieving a current density of 10 mA cm−2 at a small cell voltage of 1.58 V (Fig. 11g). Besides, TiO2@CoCH [164], and CoCH@FeOH [176] were also reported with enhanced performance of HER or overall water splitting.
Reproduced with permission from Ref. [175]. Copyright 2021, Elsevier B.V. e Schematic illustration for the step-wise fabrication of the Co(OH)F@CoFe-LDH heterostructure supported on NF. f Digital photograph of the setup for water splitting driven by one battery. g Polarization curves of various Co(OH)F@CoFe-LDH sample. Reproduced with permission from Ref. [95]. Copyright 2022, Royal Society of Chemistry
a Schematic illustration for the synthetic process of MnCo-CH@NiFe-OH pn junction. b Energy diagrams of the MnCo-CH and NiFe-OH (left) and the MnCo-CH@NiFe-OH pn junction (right). c Free energetic pathway of water oxidation over MnCo-CH@NiFe-OH. d IR-corrected LSV curves of MnCo-CH@NiFe-OH toward overall water splitting.
5 Conclusion and Perspective
Development of highly efficient non-noble metal based electrocatalysts towards OER, which is the bottleneck of H2 production from overall water splitting, has long been an important topic in the field of electrocatalysis. In the past ten years, transition metal basic salts with F−, Cl−, CO32− and NO3− have attracted extensive research interest because they exhibit much better OER activity than the conventional used metal hydroxide-based materials OER due to the anions. Despite the complexity originated from the structure evolution of basic salts during OER, some self-consistent models including anion defect model and core–shell model have been established for understanding the effect of anions on the final OER performance. Moreover, strategies such as metal do** and construction of heterostructure have been employed not only to push forward the OER performance, but also endow basic salts the ability to catalyze HER and overall water splitting. Despite the great progress that has been made, there are still some challenges and opportunities for this emerging catalyst.
5.1 Understanding the Effect of Anions
The anions contained in transition metal basic salts play a crucial role in the outstanding OER performance of metal basic salts. It is crucial to address issue for rational design of pre-catalysts. Till now, most of the works explain this important issue by simply carrying out DFT calculations with basic salts as models. However, all kinds of metal basic salts undergo partially or even fully oxidation during OER test, which means that most present explanations are not appropriate. Although the self-consistent defect models and core–shell models have been raised for explaining the effect of Cl− and F−, respectively, there has not been a general model for all the kinds of basic salts. In other words, a systematic research work which involves all the present metal basic salts with F−, Cl−, CO32− and NO3− is needed to give a reasonable explanation for the effect of anions. Moreover, considering the complexity of anion effect, in-situ and operando means such as XAFS, XPS, Raman spectroscopy should be utilized to give deep insight to metal basic salts OER pre-catalysts.
5.2 Development of New Transition Metal Basic Salt-based Pre-catalysts
Heretofore, there are four kinds of metal basic salts in terms of acid group anion (F−, Cl−, CO32− and NO3−) have been developed as catalysts towards OER, HER and overall water splitting. Plenty of follow-up works have been reported to improve the catalytic performance of these basic salts, however, metal basic salts with other anions (e.g., SeO42−, PO43−, CH3COO−) have not been employed as catalysts. In our view, these metal basic salts should also be promising pre-catalysts towards OER. Therefore, it is a research opportunity to develop new kind of metal basic salts as pre-catalyst towards OER.
5.3 Practical Application of Metal Basic Salt-based Pre-catalysts
The large current density and stability of OER electrodes are critical to the practical application of water splitting catalysts. As far we know, some of transition metal basic salts, such as MCH, have shown promising catalytic activity under industrial-level current density (1000 mA cm−2). However, the catalytic performance of most transition metal basic salt-based pre-catalysts is still evaluated at low OER current density (≤ 100 mA cm−2). Thus, it is encouraged to explore the catalytic performance of transition metal basic salt-based pre-catalysts at industrial-level current density to promote its practical application.
5.4 Exploration of New Anodic Reaction
Considering the outstanding OER activity of metal basic salts, it is reasonable to use these pre-catalysts in another electrochemical oxidation reaction. For example, urea oxidation reaction (UOR) is regard as the more favorable anodic reaction due to the lower cell potential of 0.37 V (vs. RHE), which is much lower than that of OER (1.23 V vs. RHE). Up to date, there are only a few reports in this topic with TMCH as the pre-catalyst [177], so some interesting works are expected in this area.
References
B. You, Y. Sun, Innovative strategies for electrocatalytic water splitting. Acc. Chem. Res. 51(7), 1571–1580 (2018). https://doi.org/10.1021/acs.accounts.8b00002
S. Li, P. Miao, Y. Zhang, J. Wu, B. Zhang et al., Recent advances in plasmonic nanostructures for enhanced photocatalysis and electrocatalysis. Adv. Mater. 33(6), e2000086 (2021). https://doi.org/10.1002/adma.202000086
H.-J. Liu, C.-Y. Chiang, Y.-S. Wu, L.-R. Lin, Y.-C. Ye et al., Breaking the relation between activity and stability of the oxygen-evolution reaction by highly do** Ru in wide-band-gap SrTiO3 as electrocatalyst. ACS Catal. (2022). https://doi.org/10.1021/acscatal.1c05539
R. Li, D. Wang, Superiority of dual-atom catalysts in electrocatalysis: One step further than single-atom catalysts. Adv. Energy Mater. 12(9), 2103564 (2022). https://doi.org/10.1002/aenm.202103564
H. Abe, J. Liu, K. Ariga, Catalytic nanoarchitectonics for environmentally compatible energy generation. Mater. Today 19(1), 12–18 (2016). https://doi.org/10.1016/j.mattod.2015.08.021
M. Tahir, L. Pan, F. Idrees, X. Zhang, L. Wang et al., Electrocatalytic oxygen evolution reaction for energy conversion and storage: A comprehensive review. Nano Energy 37, 136–157 (2017). https://doi.org/10.1016/j.nanoen.2017.05.022
X. Zou, Y. Zhang, Noble metal-free hydrogen evolution catalysts for water splitting. Chem. Soc. Rev. 44(15), 5148–5180 (2015). https://doi.org/10.1039/C4CS00448E
J. Liu, S. Duan, H. Shi, T. Wang, X. Yang et al., Rationally designing efficient electrocatalysts for direct seawater splitting: challenges, achievements, and promises. Angew. Chem. Int. Ed. 61, e202210753 (2022). https://doi.org/10.1002/anie.202210753
M.D. Staples, R. Malina, S.R.H. Barrett, The limits of bioenergy for mitigating global life-cycle greenhouse gas emissions from fossil fuels. Nat. Energy 2(2), 16202 (2017). https://doi.org/10.1038/nenergy.2016.202
J. Liang, F. Ma, S. Hwang, X. Wang, J. Sokolowski et al., Atomic arrangement engineering of metallic nanocrystals for energy-conversion electrocatalysis. Joule 3(4), 956–991 (2019). https://doi.org/10.1016/j.joule.2019.03.014
P.E. Brockway, A. Owen, L.I. Brand-Correa, L. Hardt, Estimation of global final-stage energy-return-on-investment for fossil fuels with comparison to renewable energy sources. Nat. Energy 4(7), 612–621 (2019). https://doi.org/10.1038/s41560-019-0425-z
N.T. Suen, S.F. Hung, Q. Quan, N. Zhang, Y.J. Xu et al., Electrocatalysis for the oxygen evolution reaction: recent development and future perspectives. Chem. Soc. Rev. 46(2), 337–365 (2017). https://doi.org/10.1039/c6cs00328a
Z.W. Seh, J. Kibsgaard, C.F. Dickens, I. Chorkendorff, J.K. Norskov et al., Combining theory and experiment in electrocatalysis: Insights into materials design. Science (2017). https://doi.org/10.1126/science.aad4998
H. **, L.W. Wong, K.H. Lai, X. Zheng, S.P. Lau et al., N-stabilized metal single atoms enabled rich defects for noble-metal alloy toward superior water reduction. EcoMat (2022). https://doi.org/10.1002/eom2.12267
Y. Yao, S. Hu, W. Chen, Z.-Q. Huang, W. Wei et al., Engineering the electronic structure of single atom Ru sites via compressive strain boosts acidic water oxidation electrocatalysis. Nat. Catal. 2(4), 304–313 (2019). https://doi.org/10.1038/s41929-019-0246-2
X. Liu, S. **, H. Kim, A. Kumar, J. Lee et al., Restructuring highly electron-deficient metal-metal oxides for boosting stability in acidic oxygen evolution reaction. Nat. Commun. 12(1), 5676 (2021). https://doi.org/10.1038/s41467-021-26025-0
B. Huang, Y. Zhao, Iridium-based electrocatalysts toward sustainable energy conversion. EcoMat 4(2), e12176 (2022). https://doi.org/10.1002/eom2.12176
J. Sun, J. Li, Z. Li, C. Li, G. Ren et al., Modulating the electronic structure on cobalt sites by compatible heterojunction fabrication for greatly improved overall water/seawater electrolysis. ACS Sustain. Chem. Eng. 10(30), 9980–9990 (2022). https://doi.org/10.1021/acssuschemeng.2c02571
A. Goswami, D. Ghosh, D. Pradhan, K. Biradha, In situ grown mn(II) MOF upon Nickel Foam acts as a robust self-supporting bifunctional electrode for overall water splitting: a bimetallic synergistic collaboration strategy. ACS Appl. Mater. Interfaces 14(26), 29722–29734 (2022). https://doi.org/10.1021/acsami.2c04304
Z. Chen, J. Chang, C. Liang, W. Wang, Y. Li et al., Size-dependent and support-enhanced electrocatalysis of 2H-MoS2 for hydrogen evolution. Nano Today 46, 101592 (2022). https://doi.org/10.1016/j.nantod.2022.101592
B. Zhang, Z. Wu, W. Shao, Y. Gao, W. Wang et al., Interfacial atom-substitution engineered transition-metal hydroxide nanofibers with high-valence fe for efficient electrochemical water oxidation. Angew. Chem. Int. Ed. 61(13), e202115331 (2022). https://doi.org/10.1002/anie.202115331
C. Liang, P. Zou, A. Nairan, Y. Zhang, J. Liu et al., Exceptional performance of hierarchical Ni–Fe oxyhydroxide@NiFe alloy nanowire array electrocatalysts for large current density water splitting. Energy Environ. Sci. 13(1), 86–95 (2020). https://doi.org/10.1039/C9EE02388G
M. Wang, Z. Wang, X. Gong, Z. Guo, The intensification technologies to water electrolysis for hydrogen production: a review. Renew. Sust. Energy Rev. 29, 573–588 (2014). https://doi.org/10.1016/j.rser.2013.08.090
B. You, Y. Sun, Chalcogenide and phosphide solid-state electrocatalysts for hydrogen generation. ChemPlusChem 81(10), 1045–1055 (2016). https://doi.org/10.1002/cplu.201600029
F. Sun, J. Qin, Z. Wang, M. Yu, X. Wu et al., Energy-saving hydrogen production by chlorine-free hybrid seawater splitting coupling hydrazine degradation. Nat. Commun. 12(1), 4182 (2021). https://doi.org/10.1038/s41467-021-24529-3
L. Yu, L. Wu, B. McElhenny, S. Song, D. Luo et al., Ultrafast room-temperature synthesis of porous S-doped Ni/Fe (oxy)hydroxide electrodes for oxygen evolution catalysis in seawater splitting. Energy Environ. Sci. 13(10), 3439–3446 (2020). https://doi.org/10.1039/D0EE00921K
H.C. Fu, Q. Zhang, J. Luo, L. Shen, X.H. Chen et al., Boosting hydrogen evolution reaction activities of three-dimensional flower-like tungsten carbonitride via anion regulation. ACS Sustain. Chem. Eng. 8(37), 14109–14116 (2020). https://doi.org/10.1021/acssuschemeng.0c04773
D. Jiang, Y. Xu, R. Yang, D. Li, S. Meng et al., CoP3/CoMoP heterogeneous nanosheet arrays as robust electrocatalyst for ph-universal hydrogen evolution reaction. ACS Sustain. Chem. Eng. 7(10), 9309–9317 (2019). https://doi.org/10.1021/acssuschemeng.9b00357
X. Zhang, H. Yi, Q. An, S. Song, Recent advances in engineering cobalt carbonate hydroxide for enhanced alkaline water splitting. J. Alloys Compd. 887, 161405 (2021). https://doi.org/10.1016/j.jallcom.2021.161405
M.G. Walter, E.L. Warren, J.R. McKone, S.W. Boettcher, Q. Mi et al., Solar water splitting cells. Chem. Rev. 110(11), 6446–6473 (2010). https://doi.org/10.1021/cr1002326
M.K. Debe, Electrocatalyst approaches and challenges for automotive fuel cells. Nature 486(7401), 43–51 (2012). https://doi.org/10.1038/nature11115
Y. Yang, H. Zhang, Z.-H. Lin, Y. Liu, J. Chen et al., A hybrid energy cell for self-powered water splitting. Energy Environ. Sci. 6(8), 2429–2434 (2013). https://doi.org/10.1039/C3EE41485J
A. Kudo, Y. Miseki, Heterogeneous photocatalyst materials for water splitting. Chem. Soc. Rev. 38(1), 253–278 (2009). https://doi.org/10.1039/B800489G
X. Zheng, B. Zhang, P. De Luna, Y. Liang, R. Comin et al., Theory-driven design of high-valence metal sites for water oxidation confirmed using in situ soft x-ray absorption. Nat. Chem. 10(2), 149–154 (2018). https://doi.org/10.1038/nchem.2886
B. Zhang, X. Zheng, O. Voznyy, R. Comin, M. Bajdich et al., Homogeneously dispersed multimetal oxygen-evolving catalysts. Science 352(6283), 333–337 (2016). https://doi.org/10.1126/science.aaf1525
W.H. Lee, C. Lim, S.Y. Lee, K.H. Chae, C.H. Choi et al., Highly selective and stackable electrode design for gaseous CO2 electroreduction to ethylene in a zero-gap configuration. Nano Energy 84, 105859 (2021). https://doi.org/10.1016/j.nanoen.2021.105859
I. Roger, M.A. Shipman, M.D. Symes, Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting. Nat. Rev. Chem. 1(1), 0003 (2017). https://doi.org/10.1038/s41570-016-0003
W.H. Lee, Y.-J. Ko, Y. Choi, S.Y. Lee, C.H. Choi et al., Highly selective and scalable CO2 to CO: electrolysis using coral-nanostructured Ag catalysts in zero-gap configuration. Nano Energy 76, 105030 (2020). https://doi.org/10.1016/j.nanoen.2020.105030
W.H. Lee, C. Lim, E. Ban, S. Bae, J. Ko et al., W@Ag dendrites as efficient and durable electrocatalyst for solar-to-CO conversion using scalable photovoltaic-electrochemical system. Appl. Catal. B-Environ. 297, 120427 (2021). https://doi.org/10.1016/j.apcatb.2021.120427
R. Frydendal, E.A. Paoli, B.P. Knudsen, B. Wickman, P. Malacrida et al., Benchmarking the stability of oxygen evolution reaction catalysts: The importance of monitoring mass losses. ChemElectroChem 1(12), 2075–2081 (2014). https://doi.org/10.1002/celc.201402262
Y. Lee, J. Suntivich, K.J. May, E.E. Perry, Y. Shao-Horn, Synthesis and activities of rutile IrO2 and RuO2 nanoparticles for oxygen evolution in acid and alkaline solutions. J. Phys. Chem. Lett. 3(3), 399–404 (2012). https://doi.org/10.1021/jz2016507
T. Reier, M. Oezaslan, P. Strasser, Electrocatalytic oxygen evolution reaction (OER) on Ru, Ir, and Pt catalysts: a comparative study of nanoparticles and bulk materials. ACS Catal. 2(8), 1765–1772 (2012). https://doi.org/10.1021/cs3003098
W.H. Lee, M.H. Han, U. Lee, K.H. Chae, H. Kim et al., Oxygen vacancies induced NiFe-hydroxide as a scalable, efficient, and stable electrode for alkaline overall water splitting. ACS Sustain. Chem. Eng. 8(37), 14071–14081 (2020). https://doi.org/10.1021/acssuschemeng.0c04542
W.H. Lee, Y.-J. Ko, J.H. Kim, C.H. Choi, K.H. Chae et al., High crystallinity design of Ir-based catalysts drives catalytic reversibility for water electrolysis and fuel cells. Nat. Commun. 12(1), 4271 (2021). https://doi.org/10.1038/s41467-021-24578-8
C.C.L. McCrory, S. Jung, J.C. Peters, T.F. Jaramillo, Benchmarking heterogeneous electrocatalysts for the oxygen evolution reaction. J. Am. Chem. Soc. 135(45), 16977–16987 (2013). https://doi.org/10.1021/ja407115p
L. Tong, L. Duan, Y. Xu, T. Privalov, L. Sun, Structural modifications of mononuclear ruthenium complexes: A combined experimental and theoretical study on the kinetics of Ruthenium-catalyzed water oxidation. Angew. Chem. Int. Ed. 50(2), 445–449 (2011). https://doi.org/10.1002/anie.201005141
D.Y. Kuo, J.K. Kawasaki, J.N. Nelson, J. Kloppenburg, G. Hautier et al., Influence of surface adsorption on the oxygen evolution reaction on IrO2(110). J. Am. Chem. Soc. 139(9), 3473–3479 (2017). https://doi.org/10.1021/jacs.6b11932
S. Niu, X.-P. Kong, S. Li, Y. Zhang, J. Wu et al., Low ru loading RuO2/(Co, Mn)3O4 nanocomposite with modulated electronic structure for efficient oxygen evolution reaction in acid. Appl. Catal. B 297, 120442 (2021). https://doi.org/10.1016/j.apcatb.2021.120442
Q. Zhang, X. Liang, H. Chen, W. Yan, L. Shi et al., Identifying key structural subunits and their synergism in low-Iridium triple perovskites for oxygen evolution in acidic media. Chem. Mater. 32(9), 3904–3910 (2020). https://doi.org/10.1021/acs.chemmater.0c00081
Y. Li, J. Abbott, Y. Sun, J. Sun, Y. Du et al., Ru nanoassembly catalysts for hydrogen evolution and oxidation reactions in electrolytes at various ph values. Appl. Catal. B 258, 117952 (2019). https://doi.org/10.1016/j.apcatb.2019.117952
E. Antolini, Iridium as catalyst and cocatalyst for oxygen evolution/reduction in acidic polymer electrolyte membrane electrolyzers and fuel cells. ACS Catal. 4(5), 1426–1440 (2014). https://doi.org/10.1021/cs4011875
R. Kötz, H. Neff, S. Stucki, Anodic iridium oxide films: XPS-studies of oxidation state changes and. J. The Electrochem. Soc. 131(1), 72–77 (1984). https://doi.org/10.1149/1.2115548
R. Kötz, H.J. Lewerenz, S. Stucki, Xps studies of oxygen evolution on Ru and RuO2 anodes. J. Electrochem. Soc. 130(4), 825–829 (1983). https://doi.org/10.1149/1.2119829
B. Zhang, Y.H. Lui, H. Ni, S. Hu, Bimetallic (FexNi1−x)2P nanoarrays as exceptionally efficient electrocatalysts for oxygen evolution in alkaline and neutral media. Nano Energy 38, 553–560 (2017). https://doi.org/10.1016/j.nanoen.2017.06.032
J. Wang, H.X. Zhong, Z.L. Wang, F.L. Meng, X.B. Zhang, Integrated three-dimensional carbon paper/carbon tubes/cobalt-sulfide sheets as an efficient electrode for overall water splitting. ACS Nano 10(2), 2342–2348 (2016). https://doi.org/10.1021/acsnano.5b07126
X. Xu, H. Liang, F. Ming, Z. Qi, Y. **e et al., Prussian blue analogues derived penroseite (Ni, Co)Se2 nanocages anchored on 3d graphene aerogel for efficient water splitting. ACS Catal. 7(9), 6394–6399 (2017). https://doi.org/10.1021/acscatal.7b02079
S. Pan, H. Li, D. Liu, R. Huang, X. Pan et al., Efficient and stable noble-metal-free catalyst for acidic water oxidation. Nat. Commun. 13(1), 2294 (2022). https://doi.org/10.1038/s41467-022-30064-6
A. Moysiadou, S. Lee, C.-S. Hsu, H.M. Chen, X. Hu, Mechanism of oxygen evolution catalyzed by cobalt oxyhydroxide: Cobalt superoxide species as a key intermediate and dioxygen release as a rate-determining step. J. Am. Chem. Soc. 142(27), 11901–11914 (2020). https://doi.org/10.1021/jacs.0c04867
H.B. Tao, J. Zhang, J. Chen, L. Zhang, Y. Xu et al., Revealing energetics of surface oxygen redox from kinetic fingerprint in oxygen electrocatalysis. J. Am. Chem. Soc. 141(35), 13803–13811 (2019). https://doi.org/10.1021/jacs.9b01834
L. Wang, L. Wang, Y. Du, X. Xu, S.X. Dou, Progress and perspectives of bismuth oxyhalides in catalytic applications. Mater. Today Phys. 16, 100294 (2021). https://doi.org/10.1016/j.mtphys.2020.100294
F. Song, L. Bai, A. Moysiadou, S. Lee, C. Hu et al., Transition metal oxides as electrocatalysts for the oxygen evolution reaction in alkaline solutions: An application-inspired renaissance. J. Am. Chem. Soc. 140(25), 7748–7759 (2018). https://doi.org/10.1021/jacs.8b04546
A. Grimaud, O. Diaz-Morales, B. Han, W.T. Hong, Y.-L. Lee et al., Activating lattice oxygen redox reactions in metal oxides to catalyse oxygen evolution. Nat. Chem. 9(5), 457–465 (2017). https://doi.org/10.1038/nchem.2695
X. Rong, J. Parolin, A.M. Kolpak, A fundamental relationship between reaction mechanism and stability in metal oxide catalysts for oxygen evolution. ACS Catal. 6(2), 1153–1158 (2016). https://doi.org/10.1021/acscatal.5b02432
X. Liu, W. Liu, M. Ko, M. Park, M.G. Kim et al., Metal (Ni, Co)-metal oxides/graphene nanocomposites as multifunctional electrocatalysts. Adv. Funct. Mater. 25(36), 5799–5808 (2015). https://doi.org/10.1002/adfm.201502217
J. Huang, J. Chen, T. Yao, J. He, S. Jiang et al., Coooh nanosheets with high mass activity for water oxidation. Angew. Chem. Int. Ed. 54(30), 8722–8727 (2015). https://doi.org/10.1002/anie.201502836
Y. Zhan, G. Du, S. Yang, C. Xu, M. Lu et al., Development of cobalt hydroxide as a bifunctional catalyst for oxygen electrocatalysis in alkaline solution. ACS Appl. Mater. Interfaces 7(23), 12930–12936 (2015). https://doi.org/10.1021/acsami.5b02670
M.S. Burke, M.G. Kast, L. Trotochaud, A.M. Smith, S.W. Boettcher, Cobalt–iron (oxy)hydroxide oxygen evolution electrocatalysts: The role of structure and composition on activity, stability, and mechanism. J. Am. Chem. Soc. 137(10), 3638–3648 (2015). https://doi.org/10.1021/jacs.5b00281
X. Zou, A. Goswami, T. Asefa, Efficient noble metal-free (electro)catalysis of water and alcohol oxidations by zinc–cobalt layered double hydroxide. J. Am. Chem. Soc. 135(46), 17242–17245 (2013). https://doi.org/10.1021/ja407174u
J. **, Y. Wang, Q. Lu, B. Chen, J. Chen et al., Self-assembly of single-layer coal-layered double hydroxide nanosheets on 3d graphene network used as highly efficient electrocatalyst for oxygen evolution reaction. Adv. Mater. 28(35), 7640–7645 (2016). https://doi.org/10.1002/adma.201601019
J. Ding, S. Ji, H. Wang, H. Gai, F. Liu et al., Mesoporous nickel-sulfide/nickel/N-doped carbon as HER and OER bifunctional electrocatalyst for water electrolysis. Int. J. Hydrog. Energy 44(5), 2832–2840 (2019). https://doi.org/10.1016/j.ijhydene.2018.12.031
Y. Xu, A. Sumboja, Y. Zong, J.A. Darr, Bifunctionally active nanosized spinel cobalt nickel sulfides for sustainable secondary zinc–air batteries: Examining the effects of compositional tuning on oer and orr activity. Catal. Sci. Technol. 10(7), 2173–2182 (2020). https://doi.org/10.1039/C9CY02185J
A. Singh, A. Singh, G. Kociok-Köhn, R. Bhimireddi, A. Singh et al., Ternary copper molybdenum sulfide (Cu2MoS4) nanoparticles anchored on pani/rgo as electrocatalysts for oxygen evolution reaction (OER). Appl. Organomet Chem. 36(6), e6683 (2022). https://doi.org/10.1002/aoc.6683
D. Kong, H. Wang, Z. Lu, Y. Cui, CoSe2 nanoparticles grown on carbon fiber paper: An efficient and stable electrocatalyst for hydrogen evolution reaction. J. Am. Chem. Soc. 136(13), 4897–4900 (2014). https://doi.org/10.1021/ja501497n
Y. Liu, H. Cheng, M. Lyu, S. Fan, Q. Liu et al., Low overpotential in vacancy-rich ultrathin CoSe2 nanosheets for water oxidation. J. Am. Chem. Soc. 136(44), 15670–15675 (2014). https://doi.org/10.1021/ja5085157
C. **a, Q. Jiang, C. Zhao, M.N. Hedhili, H.N. Alshareef, Selenide-based electrocatalysts and scaffolds for water oxidation applications. Adv. Mater. 28(1), 77–85 (2016). https://doi.org/10.1002/adma.201503906
N. Jiang, B. You, M. Sheng, Y. Sun, Electrodeposited cobalt-phosphorous-derived films as competent bifunctional catalysts for overall water splitting. Angew. Chem. Int. Ed. 54(21), 6251–6254 (2015). https://doi.org/10.1002/anie.201501616
P. Wang, F. Song, R. Amal, Y.H. Ng, X. Hu, Efficient water splitting catalyzed by cobalt phosphide-based nanoneedle arrays supported on carbon cloth. Chemsuschem 9(5), 472–477 (2016). https://doi.org/10.1002/cssc.201501599
D. Li, H. Baydoun, C.N. Verani, S.L. Brock, Efficient water oxidation using CoMnP nanoparticles. J. Am. Chem. Soc. 138(12), 4006–4009 (2016). https://doi.org/10.1021/jacs.6b01543
X. Wang, W. Li, D. **ong, D.Y. Petrovykh, L. Liu, Bifunctional nickel phosphide nanocatalysts supported on carbon fiber paper for highly efficient and stable overall water splitting. Adv. Funct. Mater. 26(23), 4067–4077 (2016). https://doi.org/10.1002/adfm.201505509
J. Huang, Y. Sun, Y. Zhang, G. Zou, C. Yan et al., A new member of electrocatalysts based on nickel metaphosphate nanocrystals for efficient water oxidation. Adv. Mater. 30(5), 1705045 (2018). https://doi.org/10.1002/adma.201705045
K. **, J. Park, J. Lee, K.D. Yang, G.K. Pradhan et al., Hydrated manganese(II) phosphate (Mn3(Po4)2·3H2O) as a water oxidation catalyst. J. Am. Chem. Soc. 136(20), 7435–7443 (2014). https://doi.org/10.1021/ja5026529
H. Kim, J. Park, I. Park, K. **, S.E. Jerng et al., Coordination tuning of cobalt phosphates towards efficient water oxidation catalyst. Nat. Commun. 6(1), 8253 (2015). https://doi.org/10.1038/ncomms9253
G.S. Hutchings, Y. Zhang, J. Li, B.T. Yonemoto, X. Zhou et al., In situ formation of cobalt oxide nanocubanes as efficient oxygen evolution catalysts. J. Am. Chem. Soc. 137(12), 4223–4229 (2015). https://doi.org/10.1021/jacs.5b01006
J.R. Petrie, H. Jeen, S.C. Barron, T.L. Meyer, H.N. Lee, Enhancing perovskite electrocatalysis through strain tuning of the oxygen deficiency. J. Am. Chem. Soc. 138(23), 7252–7255 (2016). https://doi.org/10.1021/jacs.6b03520
L. Xu, Q. Jiang, Z. **ao, X. Li, J. Huo et al., Plasma-engraved Co3O4 nanosheets with oxygen vacancies and high surface area for the oxygen evolution reaction. Angew. Chem. Int. Ed. 55(17), 5277–5281 (2016). https://doi.org/10.1002/anie.201600687
X. Zhou, X. Shen, Z. **a, Z. Zhang, J. Li et al., Hollow fluffy co3o4 cages as efficient electroactive materials for supercapacitors and oxygen evolution reaction. ACS Appl. Mate. Interfaces 7(36), 20322–20331 (2015). https://doi.org/10.1021/acsami.5b05989
X. Deng, H. Tüysüz, Cobalt-oxide-based materials as water oxidation catalyst: Recent progress and challenges. ACS Catal. 4(10), 3701–3714 (2014). https://doi.org/10.1021/cs500713d
P. Li, M. Wang, X. Duan, L. Zheng, X. Cheng et al., Boosting oxygen evolution of single-atomic ruthenium through electronic coupling with cobalt-iron layered double hydroxides. Nat. Commun. 10(1), 1711 (2019). https://doi.org/10.1038/s41467-019-09666-0
H. Ben Yahia, M. Shikano, M. Tabuchi, H. Kobayashi, M. Avdeev et al., Synthesis and characterization of the crystal and magnetic structures and properties of the hydroxyfluorides Fe(OH)F and Co(OH)F. Inor. Chem. 53(1), 365–374 (2014). https://doi.org/10.1021/ic402294g
Y. Tong, P. Chen, T. Zhou, K. Xu, W. Chu et al., A bifunctional hybrid electrocatalyst for oxygen reduction and evolution: Cobalt oxide nanoparticles strongly coupled to B. N-decorated graphene. Angew. Chem. Int. Ed. 56(25), 7121–7125 (2017). https://doi.org/10.1002/anie.201702430
Y. Zhang, B. Cui, O. Derr, Z. Yao, Z. Qin et al., Hierarchical cobalt-based hydroxide microspheres for water oxidation. Nanoscale 6(6), 3376–3383 (2014). https://doi.org/10.1039/c3nr05193e
S. Surendran, A. Sivanantham, S. Shanmugam, U. Sim, R. Kalai Selvan, Ni2P2O7 microsheets as efficient bi-functional electrocatalysts for water splitting application. Sustain. Energy Fuels 3(9), 2435–2446 (2019). https://doi.org/10.1039/C9SE00265K
F.-T. Tsai, Y.-T. Deng, C.-W. Pao, J.-L. Chen, J.-F. Lee et al., The her/oer mechanistic study of an feconi-based electrocatalyst for alkaline water splitting. J. Mater. Chem. A 8(19), 9939–9950 (2020). https://doi.org/10.1039/D0TA01877E
W. Zhang, L. Cui, J. Liu, Recent advances in cobalt-based electrocatalysts for hydrogen and oxygen evolution reactions. J. Alloys Compd. 821, 153542 (2020). https://doi.org/10.1016/j.jallcom.2019.153542
M. Qin, Y. Wang, H. Zhang, M. Humayun, X. Xu et al., Hierarchical Co(OH)F/CoFe-LDH heterojunction enabling high-performance overall water-splitting. CrystEngComm 24(34), 6018–6030 (2022). https://doi.org/10.1039/d2ce00817c
T. Tang, W.-J. Jiang, S. Niu, N. Liu, H. Luo et al., Electronic and morphological dual modulation of cobalt carbonate hydroxides by mn do** toward highly efficient and stable bifunctional electrocatalysts for overall water splitting. J. Am. Chem. Soc. 139(24), 8320–8328 (2017). https://doi.org/10.1021/jacs.7b03507
Y. Yang, X. Luan, X. Dai, X. Zhang, H. Qiao et al., Partially sulfurated ultrathin nickel-iron carbonate hydroxides nanosheet boosting the oxygen evolution reaction. Electrochim. Acta 309, 57–64 (2019). https://doi.org/10.1016/j.electacta.2019.04.091
J. Kang, J. Sheng, J. **e, H. Ye, J. Chen et al., Tubular Cu(OH)2 arrays decorated with nanothorny Co–Ni bimetallic carbonate hydroxide supported on cu foam: A 3D hierarchical core–shell efficient electrocatalyst for the oxygen evolution reaction. J. Mater. Chem. A 6(21), 10064–10073 (2018). https://doi.org/10.1039/c8ta02492h
A. Karmakar, H.S. Chavan, S.M. Jeong, J.S. Cho, Mixed transition metal carbonate hydroxide-based nanostructured electrocatalysts for alkaline oxygen evolution: Status and perspectives. Adv. Energy Sustain. Res. 3(9), 2200071 (2022). https://doi.org/10.1002/aesr.202200071
W. Wen, J.-M. Wu, L.-L. Lai, G.-P. Ling, M.-H. Cao, Hydrothermal synthesis of needle-like hyperbranched Ni(SO4)0.3(OH)1.4 bundles and their morphology-retentive decompositions to NiO for lithium storage. CrystEngComm 14(20), 6565–6572 (2012). https://doi.org/10.1039/c2ce26127h
G.G.C. Arizaga, K.G. Satyanarayana, F. Wypych, Layered hydroxide salts: synthesis, properties and potential applications. Solid State Ion. 178(15), 1143–1162 (2007). https://doi.org/10.1016/j.ssi.2007.04.016
L. Li, J. Liang, M. Luo, J. Fang, Highly qualified fabrication of Ni(SO4)0.3(OH)1.4 nanobelts via a facile TEA-assisted hydrothermal route. Powder Technol. 226, 143–146 (2012). https://doi.org/10.1016/j.powtec.2012.04.033
N. Ma, C. Fei, J. Wang, Y. Wang, Fabrication of NiFe-MOF/cobalt carbonate hydroxide hydrate heterostructure for a high-performance electrocatalyst of oxygen evolution reaction. J. Alloys Compd. 917, 165511 (2022). https://doi.org/10.1016/j.jallcom.2022.165511
F.-G. Wang, B. Liu, Z.-Y. Lin, X. Liu, Y. Ma et al., Constructing partially amorphous borate doped iron-nickel nitrate hydroxide nanoarrays by rapid microwave activation for oxygen evolution. Appl. Surf. Sci. 592, 153245 (2022). https://doi.org/10.1016/j.apsusc.2022.153245
S. Wan, J. Qi, W. Zhang, W. Wang, S. Zhang et al., Hierarchical Co(OH)F superstructure built by low-dimensional substructures for electrocatalytic water oxidation. Adv. Mater. 29(28), 1700286 (2017). https://doi.org/10.1002/adma.201700286
H. Jiang, Q. He, X. Li, X. Su, Y. Zhang et al., Tracking structural self-reconstruction and identifying true active sites toward cobalt oxychloride precatalyst of oxygen evolution reaction. Adv. Mater. 31(8), 1805127 (2019). https://doi.org/10.1002/adma.201805127
Z. Jia, Nickel hydroxide sulfate nanobelts: Hydrothermal synthesis, electrochemical property and conversion to porous NiO nanobelts, In 2011 International Conference on Materials for Renewable Energy & Environment. 1, 673–677 (2011)
W. Maalej, S. Vilminot, G. André, M. Kurmoo, Synthesis, magnetic structure, and properties of a layered cobalt−hydroxide ferromagnet, Co5(OH)6(SeO4)2(H2O)4. Inorg. Chem. 49(6), 3019–3024 (2010). https://doi.org/10.1021/ic9025552
M.A. Ballesteros, M.A. Ulibarri, V. Rives, C. Barriga, Optimum conditions for intercalation of lacunary tungstophosphate(V) anions into layered Ni(II)–Zn(II) hydroxyacetate. J. Solid State Chem. 181(11), 3086–3094 (2008). https://doi.org/10.1016/j.jssc.2008.07.037
M. Rajamathi, P.V. Kamath, Urea hydrolysis of cobalt(II) nitrate melts: Synthesis of novel hydroxides and hydroxynitrates. Int. J. Inorg. Mater. 3(7), 901–906 (2001). https://doi.org/10.1016/S1466-6049(01)00090-3
L. Markov, K. Petrov, V. Petkov, On the thermal decomposition of some cobalt hydroxide nitrates. Thermochim. Acta 106, 283–292 (1986). https://doi.org/10.1016/0040-6031(86)85140-1
H. Effenberger, Verfeinerung der kristallstruktur des monoklinen dikupfer(II)-trihydroxi-nitrates Cu2(NO3)(OH)3. Z. Kristallogr. 165(1–4), 127–136 (1983). https://doi.org/10.1524/zkri.1983.165.14.127
S.P. Newman, W. Jones, Comparative study of some layered hydroxide salts containing exchangeable interlayer anions. J. Solid State Chem. 148(1), 26–40 (1999). https://doi.org/10.1006/jssc.1999.8330
Y. Wang, W. Ding, S. Chen, Y. Nie, K. **ong et al., Cobalt carbonate hydroxide/C: an efficient dual electrocatalyst for oxygen reduction/evolution reactions. Chem. Comm. 50(98), 15529–15532 (2014). https://doi.org/10.1039/C4CC07722A
S. Wang, G. Lü, W. Tang, Synthesis and crystal structure of Co2(OH)2CO3 by rietveld method. Powder Differ. 25(S1), S7–S10 (2010). https://doi.org/10.1154/1.3478978
Z. Zhang, L. Yin, Mn-doped Co2(OH)3Cl xerogels with 3d interconnected mesoporous structures as lithium ion battery anodes with improved electrochemical performance. J. Mater. Chem. A 3(34), 17659–17668 (2015). https://doi.org/10.1039/c5ta03426d
X.G. Zheng, M. Hagihala, M. Fujihala, T. Kawae, Recent developments in the magnetic study of the deformed pyrochlore lattice M2(OH)3X (M = 3d magnetic ions, X = Cl, Br)-exotic magnetic order in Ni2(OH)3Cl and controlled spin-spin interactions in Co2(OH)3Cl1-xBrx and (Co1-xFex)2(OH)3Cl. J. Phys. Conf. Ser. 145, 012034 (2009). https://doi.org/10.1088/1742-6596/145/1/012034
L. Hui, Y. Xue, D. Jia, H. Yu, C. Zhang et al., Multifunctional single-crystallized carbonate hydroxides as highly efficient electrocatalyst for full water splitting. Adv. Energy Mater. 8(20), 1800175 (2018). https://doi.org/10.1002/aenm.201800175
S. Zhang, B. Ni, H. Li, H. Lin, H. Zhu et al., Cobalt carbonate hydroxide superstructures for oxygen evolution reactions. Chem. Comm. 53(57), 8010–8013 (2017). https://doi.org/10.1039/C7CC04604A
X. He, B. Liu, S. Zhang, H. Li, J. Liu et al., Nickel nitrate hydroxide holey nanosheets for efficient oxygen evolution electrocatalysis in alkaline condition. Electrocatalysis 13(1), 37–46 (2022). https://doi.org/10.1007/s12678-021-00686-3
W. Wang, Y. Zhong, X. Zhang, S. Zhu, Y. Tao et al., Fe-modified Co2(OH)3Cl microspheres for highly efficient oxygen evolution reaction. J. Colloid Interface Sci. 582, 803–814 (2021). https://doi.org/10.1016/j.jcis.2020.08.095
D. Potphode, M.S. Sayed, T. Lama Tamang, J.-J. Shim, High-performance binder-free flower-like (Ni0.66Co0.3Mn0.04)2(OH)2(CO3) array synthesized using ascorbic acid for supercapacitor applications. Chem. Eng. J 378, 122129 (2019). https://doi.org/10.1016/j.cej.2019.122129
Y. Ma, J. Chu, Z. Li, D. Rakov, X. Han et al., Homogeneous metal nitrate hydroxide nanoarrays grown on nickel foam for efficient electrocatalytic oxygen evolution. Small 14(52), 1803783 (2018). https://doi.org/10.1002/smll.201803783
H. Jiang, Q. He, X. Li, X. Su, Y. Zhang et al., Tracking structural self-reconstruction and identifying true active sites toward cobalt oxychloride precatalyst of oxygen evolution reaction. Adv. Mater. 31(8), e1805127 (2019). https://doi.org/10.1002/adma.201805127
W. Wang, Y. Zhong, X. Zhang, S. Zhu, Y. Tao et al., Fe-modified co2(oh)3cl microspheres for highly efficient oxygen evolution reaction. J. Colloid Interface Sci. 582(Pt B), 803–814 (2021). https://doi.org/10.1016/j.jcis.2020.08.095
Z. Liang, Z. Huang, H. Yuan, Z. Yang, C. Zhang et al., Quasi-single-crystalline CoO hexagrams with abundant defects for highly efficient electrocatalytic water oxidation. Chem. Sci. 9(34), 6961–6968 (2018). https://doi.org/10.1039/c8sc02294a
F. Shang, S. Wan, X. Gao, W. Zhang, R. Cao, Engineering hierarchical-dimensional Co(OH)F into CoP superstructure for electrocatalytic water splitting. ChemCatChem 12(19), 4770–4774 (2020). https://doi.org/10.1002/cctc.202000993
Y. Guo, T. Park, J.W. Yi, J. Henzie, J. Kim et al., Nanoarchitectonics for transition-metal-sulfide-based electrocatalysts for water splitting. Adv. Mater. 31(17), 1807134 (2019). https://doi.org/10.1002/adma.201807134
J.-Y. ** of v and f on Co3O4 nanoneedles as efficient electrocatalyst for oxygen evolution. Int. J. Hydrog. Energy 46(38), 19962–19970 (2021). https://doi.org/10.1016/j.ijhydene.2021.03.141
J. Lv, X. Yang, H.-Y. Zang, Y.-H. Wang, Y.-G. Li, Ultralong needle-like N-doped Co(OH)F on carbon fiber paper with abundant oxygen vacancies as an efficient oxygen evolution reaction catalyst. Mater. Chem. Front. 2(11), 2045–2053 (2018). https://doi.org/10.1039/c8qm00405f
G. Zhang, B. Wang, L. Li, S. Yang, Phosphorus and yttrium codoped Co(OH)F nanoarray as highly efficient and bifunctional electrocatalysts for overall water splitting. Small 15(42), e1904105 (2019). https://doi.org/10.1002/smll.201904105
Q. Lin, D. Guo, L. Zhou, L. Yang, H. ** et al., Tuning the interface of Co1-xS/Co(OH)F by atomic replacement strategy toward high-performance electrocatalytic oxygen evolution. ACS Nano 16(9), 15460–15470 (2022). https://doi.org/10.1021/acsnano.2c07588
Z. Liang, Z. Yang, Z. Huang, J. Qi, M. Chen et al., Novel insight into the epitaxial growth mechanism of six-fold symmetrical β-Co(OH)2/Co(OH)F hierarchical hexagrams and their water oxidation activity. Electrochim. Acta 271, 526–536 (2018). https://doi.org/10.1016/j.electacta.2018.03.186
S. Zhou, H. Jang, Q. Qin, Z. Li, M.G. Kim et al., Three-dimensional hierarchical Co(OH)F nanosheet arrays decorated by single-atom Ru for boosting oxygen evolution reaction. Sci. China Mater. 64(6), 1408–1417 (2021). https://doi.org/10.1007/s40843-020-1536-6
S. Zhang, B. Ni, H. Li, H. Lin, H. Zhu, H. Wang, X. Wang, Cobalt carbonate hydroxide superstructures for oxygen evolution reactions. Chem. Commun. 53(57), 8010–8013 (2017). https://doi.org/10.1039/c7cc04604a
J. Li, X. Li, Y. Luo, Q. Cen, Q. Ye et al., Cobalt carbonate hydroxide mesostructure with high surface area for enhanced electrocatalytic oxygen evolution. Int. J. Hydrog. Energy 43(20), 9635–9643 (2018). https://doi.org/10.1016/j.ijhydene.2018.03.229
G. Li, F. Li, Y. Zhao, W. Li, Z. Zhao et al., Selective electrochemical alkaline seawater oxidation catalyzed by cobalt carbonate hydroxide nanorod arrays with sequential proton-electron transfer properties. ACS Sustain. Chem. Eng. 9(2), 905–913 (2021). https://doi.org/10.1021/acssuschemeng.0c07953
W. Wang, M. Ma, M. Kong, Y. Yao, N. Wei, Cobalt carbonate hydroxide hydrate nanowires array: A three-dimensional catalyst electrode for effective water oxidation. Micro Nano Lett. 12(4), 264–266 (2017). https://doi.org/10.1049/mnl.2016.0639
M. **e, L. Yang, Y. Ji, Z. Wang, X. Ren et al., An amorphous co-carbonate-hydroxide nanowire array for efficient and durable oxygen evolution reaction in carbonate electrolytes. Nanoscale 9(43), 16612–16615 (2017). https://doi.org/10.1039/c7nr07269d
Y. Jia, Y.-N. Li, Z.-M. Wang, F.-M. Li, P.-J. ** et al., Porous cobalt carbonate hydroxide nanospheres towards oxygen evolution reaction. Chem. Eng. J. 417, 128066 (2021). https://doi.org/10.1016/j.cej.2020.128066
Y. Yan, Facile synthesis of carbon cloth supported cobalt carbonate hydroxide hydrate nanoarrays for highly efficient oxygen evolution reaction. Front. Chem. 9, 754357 (2021). https://doi.org/10.3389/fchem.2021.754357
C. Tang, R. Zhang, W. Lu, L. He, X. Jiang et al., Fe-doped cop nanoarray: A monolithic multifunctional catalyst for highly efficient hydrogen generation. Adv. Mater. 29(2), 1602441 (2017). https://doi.org/10.1002/adma.201602441
S. Zhang, B. Huang, L. Wang, X. Zhang, H. Zhu et al., Boosted oxygen evolution reactivity via atomic iron do** in cobalt carbonate hydroxide hydrate. ACS Appl. Mater. Interfaces 12(36), 40220–40228 (2020). https://doi.org/10.1021/acsami.0c07260
K. Karthick, S. Subhashini, R. Kumar, S. Sethuram Markandaraj, M.M. Teepikha et al., Cubic nanostructures of nickel-cobalt carbonate hydroxide hydrate as a high-performance oxygen evolution reaction electrocatalyst in alkaline and near-neutral media. Inorg. Chem. 59(22), 16690–16702 (2020). https://doi.org/10.1021/acs.inorgchem.0c02680
A. Karmakar, S.K. Srivastava, Transition-metal-substituted cobalt carbonate hydroxide nanostructures as electrocatalysts in alkaline oxygen evolution reaction. ACS Appl. Energy Mater. 3(8), 7335–7344 (2020). https://doi.org/10.1021/acsaem.0c00623
A. Karmakar, S.K. Srivastava, Hierarchically hollow interconnected rings of nickel substituted cobalt carbonate hydroxide hydrate as promising oxygen evolution electrocatalyst. Int. J. Hydrog. Energy 47(53), 22430–22441 (2022). https://doi.org/10.1016/j.ijhydene.2022.05.062
M. **, J. Li, J. Gao, W. Liu, J. Han et al., Atomic-level tungsten do** triggered low overpotential for electrocatalytic water splitting. J. Colloid Interface Sci. 587, 581–589 (2021). https://doi.org/10.1016/j.jcis.2020.11.015
J. Zhao, X. Liu, X. Ren, B. Du, X. Kuang et al., Chromium do**: a new approach to regulate electronic structure of cobalt carbonate hydroxide for oxygen evolution improvement. J. Colloid Interface Sci. 609, 414–422 (2022). https://doi.org/10.1016/j.jcis.2021.12.020
M. Dai, H. Fan, G. Xu, M. Wang, S. Zhang et al., Boosting electrocatalytic oxygen evolution using ultrathin carbon protected iron-cobalt carbonate hydroxide nanoneedle arrays. J. Power Sources 450, 227639 (2020). https://doi.org/10.1016/j.jpowsour.2019.227639
T. Tang, W.-J. Jiang, S. Niu, L.-P. Yuan, J.-S. Hu et al., Hetero-coupling of a carbonate hydroxide and sulfide for efficient and robust water oxidation. J. Mater. Chem. A 7(38), 21959–21965 (2019). https://doi.org/10.1039/C9TA07882G
J. Kang, J. Chen, J. Sheng, J. **e, X.-Z. Fu et al., Pd nanoparticle-interspersed hierarchical copper hydroxide@nickel cobalt hydroxide carbonate tubular arrays as efficient electrocatalysts for oxygen evolution reaction. ACS Sustain. Chem. Eng. 7(19), 16459–16466 (2019). https://doi.org/10.1021/acssuschemeng.9b03653
Y. Liu, Y. Wang, H. Wen, Y. Han, S. Deng, Green preparation of CNTs/graphite supported NiFe carbonate hydroxides for oxygen evolution reaction. ChemCatChem 14(18), e202200453 (2022). https://doi.org/10.1002/cctc.202200453
X. He, B. Liu, S. Zhang, H. Li, J. Liu et al., Nickel nitrate hydroxide holey nanosheets for efficient oxygen evolution electrocatalysis in alkaline condition. Electrocatalysis 13(1), 37–46 (2021). https://doi.org/10.1007/s12678-021-00686-3
Y. Ma, J. Chu, Z. Li, D. Rakov, X. Han et al., Homogeneous metal nitrate hydroxide nanoarrays grown on nickel foam for efficient electrocatalytic oxygen evolution. Small 14(52), e1803783 (2018). https://doi.org/10.1002/smll.201803783
J. Liu, X. He, Y. Wang, Z. Sun, Y. Liu et al., Deep reconstruction of highly disordered iron/nickel nitrate hydroxide nanoplates for high-performance oxygen evolution reaction in alkaline media. J. Alloys Compd. 927, 167060 (2022). https://doi.org/10.1016/j.jallcom.2022.167060
C. Li, G. Wang, K. Li, Y. Liu, B. Yuan et al., Feni-based coordination crystal directly serving as efficient oxygen evolution reaction catalyst and its density functional theory insight on the active site change mechanism. ACS Appl. Mater. Interfaces 11(23), 20778–20787 (2019). https://doi.org/10.1021/acsami.9b02994
M.B. Stevens, C.D.M. Trang, L.J. Enman, J. Deng, S.W. Boettcher, Reactive fe-sites in Ni/Fe (oxy)hydroxide are responsible for exceptional oxygen electrocatalysis activity. J. Am. Chem. Soc. 139(33), 11361–11364 (2017). https://doi.org/10.1021/jacs.7b07117
F. Song, M.M. Busch, B. Lassalle-Kaiser, C.-S. Hsu, E. Petkucheva et al., An unconventional iron nickel catalyst for the oxygen evolution reaction. ACS Cent. Sci. 5(3), 558–568 (2019). https://doi.org/10.1021/acscentsci.9b00053
S. Niu, Y. Sun, G. Sun, D. Rakov, Y. Li et al., Stepwise electrochemical construction of FeOOH/Ni(OH)2 on Ni foam for enhanced electrocatalytic oxygen evolution. ACS Appl. Energy Mater. 2(5), 3927–3935 (2019). https://doi.org/10.1021/acsaem.9b00785
Y. Ma, Z. Lu, S. Li, J. Wu, J. Wang et al., In situ growth of amorphous fe(oh)3 on nickel nitrate hydroxide nanoarrays for enhanced electrocatalytic oxygen evolution. ACS Appl. Mater. Interfaces 12(11), 12668–12676 (2020). https://doi.org/10.1021/acsami.9b19437
Y.N. Zhou, Y. Ma, Z.N. Shi, J.C. Zhou, B. Dong et al., Boosting oxygen evolution by nickel nitrate hydroxide with abundant grain boundaries via segregated high-valence molybdenum. J. Colloid Interface Sci. 613, 224–233 (2022). https://doi.org/10.1016/j.jcis.2021.12.179
R. Subbaraman, D. Tripkovic, D. Strmcnik, K.-C. Chang, M. Uchimura et al., Enhancing hydrogen evolution activity in water splitting by tailoring Li+-Ni(OH)2-Pt interfaces. Science 334(6060), 1256–1260 (2011). https://doi.org/10.1126/science.1211934
W. Lu, X. Li, F. Wei, K. Cheng, W. Li et al., Fast sulfurization of nickel foam-supported nickel-cobalt carbonate hydroxide nanowire array at room temperature for hydrogen evolution electrocatalysis. Electrochim. Acta 318, 252–261 (2019). https://doi.org/10.1016/j.electacta.2019.06.088
L. Yuan, S. Liu, S. Xu, X. Yang, J. Bian et al., Modulation of volmer step for efficient alkaline water splitting implemented by titanium oxide promoting surface reconstruction of cobalt carbonate hydroxide. Nano Energy 82, 105732 (2021). https://doi.org/10.1016/j.nanoen.2020.105732
L. Hui, D. Jia, H. Yu, Y. Xue, Y. Li, Ultrathin graphdiyne-wrapped iron carbonate hydroxide nanosheets toward efficient water splitting. ACS Appl. Mater. Interfaces 11(3), 2618–2625 (2019). https://doi.org/10.1021/acsami.8b01887
X. Zhang, R. Zheng, M. **, R. Shi, Z. Ai et al., Nicosx@cobalt carbonate hydroxide obtained by surface sulfurization for efficient and stable hydrogen evolution at large current densities. ACS Appl. Mater. Interfaces 13(30), 35647–35656 (2021). https://doi.org/10.1021/acsami.1c07504
S.-Q. Liu, M.-R. Gao, S. Liu, J.-L. Luo, Hierarchically assembling cobalt/nickel carbonate hydroxide on copper nitride nanowires for highly efficient water splitting. Appl. Catal. B (2021). https://doi.org/10.1016/j.apcatb.2021.120148
J. Ding, L. Zhong, Q. Huang, Y. Guo, T. Miao et al., Chitosan hydrogel derived carbon foam with typical transition-metal catalysts for efficient water splitting. Carbon 177, 160–170 (2021). https://doi.org/10.1016/j.carbon.2021.01.160
K. Karthick, A.B. Mansoor Basha, A. Sivakumaran, S. Kundu, Enhancement of her kinetics with rhnife for high-rate water electrolysis. Catal. Sci. Technol. 10(11), 3681–3693 (2020). https://doi.org/10.1039/d0cy00310g
J. Li, Q. Zhou, Z. Shen, S. Li, J. Pu et al., Synergistic effect of ultrafine nano-ru decorated cobalt carbonate hydroxides nanowires for accelerated alkaline hydrogen evolution reaction. Electrochim. Acta 331, 135367 (2020). https://doi.org/10.1016/j.electacta.2019.135367
H.T. Le, D.T. Tran, T.H. Nguyen, V.A. Dinh, N.H. Kim et al., Single platinum atoms implanted 2d lateral anion-intercalated metal hydroxides of Ni2(OH)2(NO3)2 as efficient catalyst for high-yield water splitting. Appl. Catal. B 317, 121684 (2022). https://doi.org/10.1016/j.apcatb.2022.121684
M. Zhao, J. Du, H. Lei, L. Pei, Z. Gong et al., Enhanced electrocatalytic activity of feni alloy quantum dot-decorated cobalt carbonate hydroxide nanosword arrays for effective overall water splitting. Nanoscale 14(8), 3191–3199 (2022). https://doi.org/10.1039/d1nr08035k
S.-Q. Liu, M.-R. Gao, S. Liu, J.-L. Luo, Hierarchically assembling cobalt/nickel carbonate hydroxide on copper nitride nanowires for highly efficient water splitting. Appl. Catal. B 292, 120148 (2021). https://doi.org/10.1016/j.apcatb.2021.120148
H. Yi, X. Zhang, R. Zheng, S. Song, Q. An et al., Rich se nanoparticles modified cobalt carbonate hydroxide as an efficient electrocatalyst for boosted hydrogen evolution in alkaline conditions. Appl. Surf. Sci. 565, 150505 (2021). https://doi.org/10.1016/j.apsusc.2021.150505
Y. Zeng, Z. Cao, J. Liao, H. Liang, B. Wei et al., Construction of hydroxide pn junction for water splitting electrocatalysis. Appl. Catal. B 292, 120160 (2021). https://doi.org/10.1016/j.apcatb.2021.120160
Y. Qiu, Z. Liu, Q. Yang, X. Zhang, J. Liu et al., Atmospheric-temperature chain reaction towards ultrathin non-crystal-phase construction for highly efficient water splitting. Chemistry 28(51), e202200683 (2022). https://doi.org/10.1002/chem.202200683
M. Song, Z. Zhang, Q. Li, W. **, Z. Wu et al., Ni-foam supported Co(OH)F and Co-P nanoarrays for energy-efficient hydrogen production via urea electrolysis. J. Mater. Chem. A 7(8), 3697–3703 (2019). https://doi.org/10.1039/C8TA10985K
Acknowledgements
This work was supported by the financial support from Natural Science Foundation of China (Nos. 21871065, 22209129 and 22071038), High-Level Innovation and Entrepreneurship (QCYRCXM-2022-123). Prof. Li acknowledges the financial support from the “Young Talent Support Plan” of **’an Jiaotong University (HG6J024) and “Young Talent Lift Plan” of **’an city (095920221352).
Funding
Open access funding provided by Shanghai Jiao Tong University.
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Guo, B., Ding, Y., Huo, H. et al. Recent Advances of Transition Metal Basic Salts for Electrocatalytic Oxygen Evolution Reaction and Overall Water Electrolysis. Nano-Micro Lett. 15, 57 (2023). https://doi.org/10.1007/s40820-023-01038-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40820-023-01038-0