Abstract
The present paper deals with the experimental characterization via infrared thermography of the temperature distribution in the electronic components of a frequency inverter of a 1-kW cooling capacity variable-speed refrigeration compressor. The transient thermal behavior was measured at the maximum compressor cooling capacity, and the tests were kept as closely as possible to real operating conditions by having the compressor connected to a hot-gas cycle calorimeter during the experiment. The printed circuit board was kept inside the hard plastic enclosure designed to protect the electronic components from airborne dust particles and moisture. Therefore, the experimental analysis involved the application of infrared-transparent material (plastic tape) on specific regions of the plastic enclosure to allow visual access to the electronic components. The infrared transmissivity of the plastic tape was experimentally determined as part of the analysis. The results reveal details about the thermal interaction between the components and confirm the applicability of infrared thermography in the analysis of heat transfer effects inside closed cavities. The insulated-gate bipolar transistors exhibited the largest and fastest variation among all components, while the capacitors presented the smallest temperature change. Agreement between infrared thermography and calibrated type-T thermocouples was within ±3 °C at steady state for some components.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig7_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig8_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig9_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40430-014-0148-9/MediaObjects/40430_2014_148_Fig10_HTML.gif)
Similar content being viewed by others
Abbreviations
- f :
-
Compressor frequency (Hz)
- Q :
-
Cooling capacity (W)
- v :
-
Specific volume (m3/kg)
- V d :
-
Swept volume (m3)
- Δh e :
-
Specific refrigerating effect (kJ/kg)
- ac:
-
Alternating current
- dc:
-
Direct current
- CFD:
-
Computational fluid dynamics
- EMI:
-
Electromagnetic interference
- IGBT:
-
Insulated-gate bipolar transistor
- IR:
-
Infrared
- MOSFET:
-
Metal oxide semiconductor field effect transistor
- NTC:
-
Negative temperature coefficient
- PCB:
-
Printed circuit board
- VCC:
-
Variable capacity compressor
References
Ardestani EK, Mesa-Martínez FJ, Renau J (2010) Cooling solutions for processor infrared thermography. In; Proceedings of 26th IEEE SEMI-THERM Symposium, Santa Clara, CA, Feb 21–25, pp 187–190
Brito Filho JP, Henriquez JR (2010) Infrared thermography applied for high-level current density identification over planar microwave circuit sectors. Infrared Phys Technol 53:84–88
Cheng H-C, Chen W-H, Cheng H-F (2008) Theoretical and experimental characterization of heat dissipation in a board-level microelectronic component. Appl Therm Eng 28:575–588
Dutra T, Deschamps CJ (2013) Experimental characterization of heat transfer in the components of a small hermetic reciprocating compressor. Appl Therm Eng 58:499–510
Farkhani FF, Mohammadi FA (2010) Temperature and power measurement of modern dual core processor by infrared thermography. In: Proceedings of 2010 IEEE International Symposium on Circuits and Systems (ISCAS), Paris, France, May 30–June 02, pp 1603–1606
Flores-Sahagun JH, Vargas JVC, Mulinari-Brenner FA (2011) Analysis and diagnosis of basal cell carcinoma (BCC) via infrared imaging. Infrared Phys Technol 54:367–378
Garimella SV, Fleisher AS, Murthy JY, Keshavarzi A, Prasher R, Patel C, Bhavnani S, Venkatasubramanian R, Mahajan R, Joshi Y, Sammakia B, Myers BA, Chorosinski L, Baelmans M, Sathyamurthy P, Raad P (2008) Thermal challenges in next-generation electronic systems. IEEE Trans Compon Packag Technol 31(4):801–815
Hamann HF, Weger A, Lacey JA, Hu Z, Bose P, Cohen E, Wakil J (2007) Hotspot-limited microprocessors: direct temperature and power distribution measurements. IEEE J Solid-State Circuits 42(1):56–65
Kim JH, Simon TW, Viskanta R (1993) Journal of heat transfer policy on reporting uncertainties in experimental measurements and results. J Heat Transf 115:5–6
Kremer R, Barbosa JR Jr, Deschamps CJ (2012) Cooling of a reciprocating compressor through oil atomization in the cylinder. HVAC R Res 18:481–499
Linnander B (1993) When it’s too hot to touch use infrared thermography. Circuits Dev 9:35–37
Meinders ER, van der Meer ThH, Hanjalic K, Lasance CJM (1997) Application of infrared thermography to the evaluation of local convective heat transfer on arrays of cubical protrusions. Int J Heat Fluid Flow 18:152–159
Mesa-Martínez FJ, Nayfach-Battilana J, Renau J, (2007) Power model validation through thermal measurements. In: Proceedings of the 34th Annual International Symposium on Computer Architecture ISCAS’07, San Diego, CA, June 9–13, pp 302–311
Minkina W, Dudzik S (2009) Infrared thermography: errors and uncertainties. Springer, New York
Pizarro-Recabarren RA, Barbosa Jr JR, Prata AT, Ribas Jr FA (2009) Modelling the influence of the lubricant oil on the heat transfer in hermetic reciprocating compressors. In: Proceedings of the International Conference on Compressors and their Systems, London, UK, Paper-C682-017
Acknowledgments
The authors thank Mr. Gunter J. Maass (EECON) for technical support and advice. Financial support from EECON (Embraco Electronic Controls) and CNPq through grant No. 573581/2008-8 (National Institute of Science and Technology in Cooling and Thermophysics) is duly acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Jose Parise.
Rights and permissions
About this article
Cite this article
Macarios, T.d.C., Barbosa, J.R. Infrared thermal imaging analysis of a 1-kW variable capacity compressor frequency inverter. J Braz. Soc. Mech. Sci. Eng. 37, 275–284 (2015). https://doi.org/10.1007/s40430-014-0148-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40430-014-0148-9