Abstract
The impact of cutting parameters on the SR of machined work piece and tool flank wear during machining of AISI 420 martensitic stainless steel is studied in the research study. PVD-CAE coated TiAlN, AlTiN, and TiAlSiN cutting tool inserts were employed for machining. The potential influence of cutting parameters was determined using analysis of variance. To optimise the process parameters influencing roughness and tool wear, Taguchi methodology based L9 orthogonal array was selected. A multi-objective optimization strategy based on grey relation and fuzzy control had been employed in this investigation. Grey relation analysis was used to improve the process parameters, which were then fuzzified using the Mamdani fuzzy engine. The parameter combination of speed 120 m/min, CD − 1.5 mm, F − 0.1 mm/rev and TiAlN coating was proven to be the best optimized setting.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig1_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig3_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig4_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig5_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig6_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig7_HTML.png)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig8_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs40033-022-00346-w/MediaObjects/40033_2022_346_Fig9_HTML.jpg)
Similar content being viewed by others
References
C. Scheuer et al., AISI 420 martensitic stainless steel corrosion resistance enhancement by low-temperature plasma carburizing. Electrochim. Acta 317, 70–82 (2019)
A. Dalmau, C. Richard, A. Igual-Muñoz, Degradation mechanisms in martensitic stainless steels: wear, corrosion and tribocorrosion appraisal. Tribol. Int. 121, 167–179 (2018)
P. Dabreo et al., Estimation of tool life by industrial method and Taylors method using coated carbide insert in turning of work-material Ss316l. IOP Conf. Series: Mater. Sci. Eng. 1070, 012101 (2021)
D. Palanisamy et al., Experimental investigation on surface integrity during machining of AISI 420 steel with tungsten carbide insert. Mater. Today Proc. 22, 992–997 (2020)
N. Sharma, K. Gupta, Influence of coated and uncoated carbide tools on tool wear and surface quality during dry machining of stainless steel 304. Mater. Res. Express 6(8), 086585 (2019)
M.H.S. Elmunafi, Influence of cutting condition on chip morphology when turning hardened stainless steel using coated carbide cutting tools under minimum quantity of lubrication. in AIP Conference Proceedings. 2020. AIP Publishing LLC
A. Panda, S. Ranjan Das, D. Dhupal, Machinability investigation of HSLA steel in hard turning with coated ceramic tool: assessment, modeling, optimization and economic aspects. J. Adv. Manuf. Syst. 18(04), 625–655 (2019)
E. Basihos, F. Erzincanli, Machinibility of AISI 420 stainless steel depending on cutting speed, tool nose radius and tool coating. J. Eng. Res. Appl. Sci. 8(1), 1127–1131 (2019)
M.K. Alam et al., Mechanical behavior of additive manufactured AISI 420 martensitic stainless steel. Mater. Sci. Eng. A 773, 138815 (2020)
M. Kaladhar, Optimization of machining parameters when machining beyond recommended cutting speed. World J. Eng. 17, 739–749 (2020)
A. Zerti et al., Prediction of machining performance using RSM and ANN models in hard turning of martensitic stainless steel AISI 420. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 233(13), 4439–4462 (2019)
C. Moganapriya et al., Influence of coating material and cutting parameters on surface roughness and material removal rate in turning process using Taguchi method. Mater. Today Proc. 5(2), 8532–8538 (2018)
C. Moganapriya et al., Effect of coating on tool inserts and cutting fluid flow rate on the machining performance of AISI 1015 steel. Mater. Test. 60(12), 1202–1208 (2018)
C. Moganapriya et al., Tribomechanical behavior of TiCN/TiAlN/WC-C multilayer film on cutting tool inserts for machining. Mater. Test. 59(7–8), 703–707 (2017)
C. Moganapriya et al., Influence of cutting fluid flow rate and cutting parameters on the surface roughness and flank wear of TiAlN coated tool in turning AISI 1015 steel using Taguchi method. Arch. Metall. Mater. 62(3), 1827–1832 (2017)
N. Patel et al., Secondary hardness enhancement in large period TiN/TaN superlattices. Surf. Coat. Technol. 254, 21–27 (2014)
C. Moganapriya et al., Technical performance of nano-layered CNC cutting tool inserts—an extensive review. Mater. Today Proc. 45, 663–669 (2021)
P.D. Pantula, S.S. Miriyala, K. Mitra, KERNEL: Enabler to build smart surrogates for online optimization and knowledge discovery. Mater. Manuf. Process. 32(10), 1162–1171 (2017)
P.D. Pantula, K. Mitra, Towards efficient robust optimization using data based optimal segmentation of uncertain space. Reliab. Eng. Syst. Saf. 197, 106821 (2020)
P.D. Pantula, K. Mitra, A data-driven approach towards finding closer estimates of optimal solutions under uncertainty for an energy efficient steel casting process. Energy 189, 116253 (2019)
T. Kostadin, S. Jakovljevic, Analysis of corrosion resistance when turning martensitic stainless steel X20Cr13 under chilled air-cooling. Adv. Prod. Eng. Manag. 12(2), 105–114 (2017)
M. De Paula et al., Analysis of the performance of coated carbide cutting tools in the machining of martensitic stainless steel AISI 410 in dry and mql conditions. Mater. Res. Express 6(1), 016512 (2018)
N. Jeyaprakash et al., Comparison of microstructure, mechanical and wear behaviour of laser cladded stainless steel 410 substrate using stainless steel 420 and Colmonoy 5 particles. J. Iron. Steel Res. Int. 27(12), 1446–1455 (2020)
C. Vishwas et al., Effect of machining parameters on surface integrity during dry turning of AISI 410 martensitic stainless steel. IOP Conf. Series Mater. Sci. Eng. 376, 012127 (2018)
M. Bertolete et al., Effects of texturing the rake surfaces of cemented tungsten carbide tools by ultrashort laser pulses in machining of martensitic stainless steel. Int. J. Adv. Manuf. Technol. 98(9), 2653–2664 (2018)
Z. Zhang, T. Yu, R. Kovacevic, Erosion and corrosion resistance of laser cladded AISI 420 stainless steel reinforced with VC. Appl. Surf. Sci. 410, 225–240 (2017)
C. Moganapriya et al., Dry machining performance studies on TiAlSiN coated inserts in turning of AISI 420 martensitic stainless steel and multi-criteria decision making using taguchi-DEAR approach. Silicon 2021, 1–14 (2021)
C. Moganapriya et al., Achieving machining effectiveness for AISI 1015 structural steel through coated inserts and grey-fuzzy coupled Taguchi optimization approach. Struct. Multidiscip. Optim. 63(3), 1169–1186 (2021)
S. Nandhakumar, R.S. Prakash, Parametric optimization in CNC turning of martensitic stainless steel 416 using Taguchi method. J. Chem. Pharm. Sci. ISSN 974, 2115 (2017)
G. Cukor et al., Sustainable turning of martensitic stainless steel. Trans. FAMENA 43(3), 1–12 (2019)
J.G. Corrêa, R.B. Schroeter, Á.R. Machado, Tool life and wear mechanism analysis of carbide tools used in the machining of martensitic and supermartensitic stainless steels. Tribol. Int. 105, 102–117 (2017)
V. Prabakaran, Wear mechanism and tool performance of TiAlN coated during machining of AISI410 Steel. J. Bio Tribo-Corros. 4(4), 1–9 (2018)
G.C. Rosa et al., Wear analysis of ultra-fine grain coated carbide tools in hard turning of AISI 420C stainless steel. Wear 376, 172–177 (2017)
M. Chinnasamy et al., A frontier statistical approach towards online tool condition monitoring and optimization for dry turning operation of SAE 1015 steel. Archiv. Metall. Mater. 66(3), 901–909 (2021)
Funding
The author(s) received no financial support for the research work.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflicts of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Chinnasamy, M., Rathanasamy, R., Palaniappan, S.K. et al. Investigation of TiAlN, AlTiN, and TiAlSiN Coated Inserts on the Machining Performance of AISI 420 Steel and Multi-Objective Optimization of Process Parameters. J. Inst. Eng. India Ser. D 103, 563–573 (2022). https://doi.org/10.1007/s40033-022-00346-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40033-022-00346-w