Abstract
This paper investigated the mechanical properties of epoxy reinforced with homogeneously dispersed vapor-grown carbon nanofibres (CNFs) at low concentrations (0.1–0.5 wt%). The homogeneous dispersion of CNF in epoxy was achieved using an optimized dispersion route which was selected among a variety of dispersion techniques. The state of CNF dispersion in the epoxy resin and within the nanocomposites was studied using optical and atomic force microscopy. A detailed investigation on the CNF dispersion behaviour revealed that an ultrasonic treatment assisted with high speed mechanical stirring at 2,000 rpm was very effective in dispersing CNF uniformly in the epoxy resin. Dispersion of CNF up to 0.5 wt% using this route improved the tensile modulus and strength of epoxy by 35% and 63% respectively. Similarly, flexural and compressive properties also improved significantly. Fracture surface of tensile failed specimens was characterized by scanning electron microscopy in order to investigate the fracture mechanism.
Similar content being viewed by others
References
Hull D, Clyne TW (1996) An introduction to composite materials. Cambridge University Press, Cambridge
Shalin RE (1995) Polymer matrix composites. Chapman & Hall, London
Brydson JA (1999) Plastics materials. Butterworth-Heinemann, Oxford
Sultan JN, McGarry FJ (1973) Polym Eng Sci 13:29
Gadaree KP, Salee G (1983) Polym Compos 4:19
Spanoudakis J, Young RJ (1984) J Mater Sci 19:473
Moloney AC, Kausch HH, Stieger HR (1983) J Mater Sci 18:208
Moloney AC, Kausch HH (1985) J Mater Sci Lett 4:289
Karger-Kocsis J, Friedrich K (1993) Compos Sci Technol 48:263
Rana S, Alagirusamy R, Joshi M (2009) J Reinf Plast Compos 28:461
Al-Saleh MH, Sundararaj U (2009) Carbon 47:2
Khare R, Bose S (2005) J Miner Mater Charact Eng 4:31
Thostenson ET, Ren Z, Chou T (2001) Compos Sci Technol 61:1899
Lau KT, Hui D (2002) Compos B 33:263
Wetzel B, Rosso P, Haupert F, Friedrich K (2006) Eng Fract Mech 73:2375
Liao YH, Tondin OM, Liang Z, Zhang C, Wang B (2004) Mater Sci Eng A 385:175
Cui S, Canet R, Derre A, Couzi M, Delhaes P (2003) Carbon 41:797
Sandler J, Shaffer MSP, Prasse T, Bauhofer W, Schulte K, Windle AH (1999) Polymer 40:5967
Gojny FH, Schulte K (2004) Compos Sci Technol 64:2303
Kim JA, Seong DG, Kang TJ, Youn JR (2006) Carbon 44:1898
Gauthier C, Chazeau L, Prasse T, Cavaille JY (2005) Compos Sci Technol 65:335
Patton RD, Pittman CU, Wang L, Hill JR (1999) Compos A 30:1081
Choi YK, Sugimoto K, Song SM, Gotoh Y, Ohkoshi Y, Endo M (2005) Carbon 43:2199
Rana S, Alagirusamy R, Joshi M (2010) J Appl Polym Sci 118:2276
Acknowledgements
The authors would like to thank Prof. Tibor Czigany (Budapest University of Technology and Economics, Department of Polymer Engineering, Hungary) and his team for his kind support in mechanical testing of CNF/epoxy composites.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Rana, S., Alagirusamy, R. & Joshi, M. Mechanical properties of epoxy reinforced with homogeneously dispersed carbon nanofibre. Int J Plast Technol 14, 224–233 (2010). https://doi.org/10.1007/s12588-011-0020-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12588-011-0020-z