Abstract
In order to improve the ablation resistance of C/C composites, ZrB2-based coating was prepared by supersonic atmosphere plasma spraying for SiC-coated C/C composites. The phase composition, microstructure, and anti-ablation property of the coating were investigated. Results show that the supersonic atmosphere plasma spraying is an effective method to prepare a dense ZrB2-based coating. The coating largely improves the ablation resistance of C/C composites. The linear ablation rate is 0.17 μm/s after ablation for 60 s in oxyacetylene torch. In ablation center, the ablation performance is determined by complicated mechanical denudation and chemical erosion. The formation of ZrO2 during ablation can partly prevent the diffusion of oxygen, which contributes to the good ablation resistance of ZrB2-based coating. In transition zone, the generation of SiO2 prevents inner coating from ablation and the chemical erosion becomes the leading mechanism.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig2_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig3_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig4_HTML.jpg)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig6_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11666-013-9913-z/MediaObjects/11666_2013_9913_Fig7_HTML.jpg)
Similar content being viewed by others
References
E. Fitzer, The Future of Carbon-Carbon Composites, Carbon, 1987, 25(2), p 163-190
M.E. Westwood, J.D. Webster, R.J. Day, F.H. Hayes, and R. Taylor, Oxidation Protection for Carbon Fibre Composites, J. Mater. Sci., 1996, 31(6), p 1389-1397
J.D. Buckley, Carbon-Carbon, Am. Ceram. Soc. Bull., 1988, 67(2), p 364-368
J.C. Han, X.D. He, and S.Y. Du, Oxidation and Ablation of 3D Carbon-Carbon Composite at up to 3000 °C, Carbon, 1995, 33(4), p 473-478
T. Windhorst and G. Blount, Carbon-Carbon Composites: A Summary of Recent Developments and Applications, Mater. Des., 1997, 18(1), p 11-15
N.S. Jacobson and D.M. Curry, Oxidation Microstructure Studies of Reinforced Carbon/Carbon, Carbon, 2006, 44(7), p 1142-1150
F. Smeacetto, M. Salvo, and M. Ferraris, Oxidation Protective Multilayer Coatings for Carbon-Carbon Composites, Carbon, 2002, 40(4), p 583-587
Y.G. Wang, X.J. Zhu, L.T. Zhang, and L.F. Cheng, Reaction Kinetics and Ablation Properties of C/C-ZrC Composites Fabricated by Reactive Melt Infiltration, Ceram. Int., 2011, 37(4), p 1277-1283
W. Sun, X. **ong, B.Y. Huang, G.D. Li, H.B. Zhang, Z.K. Chen, and X.L. Zheng, ZrC Ablation Protective Coating for Carbon/Carbon Composites, Carbon, 2009, 47(14), p 3368-3371
Y.J. Wang, H.J. Li, Q.G. Fu, H. Wu, D.J. Yao, and B.B. Wei, Ablative Property of HfC-Based Multilayer Coating for C/C Composites under Oxy-acetylene Torch, Appl. Surf. Sci., 2011, 257(10), p 4760-4763
Z.K. Chen, X. **ong, G.D. Li, and Y.L. Wang, Ablation Behaviors of Carbon/Carbon Composites with C-SiC-TaC Multi-Interlayers, Appl. Surf. Sci., 2009, 255(22), p 9217-9223
H. Wu, H.J. Li, Q.G. Fu, D.J. Yao, Y.J. Wang, C. Ma, J.F. Wei, and Z.H. Hai, Microstructure and Ablation Resistance of ZrC Coating for SiC-Coated Carbon/Carbon Composite Prepared by Supersonic Plasma Spraying, J. Therm. Spray Technol., 2011, 20(6), p 1286-1291
X.T. Shen, K.Z. Li, H.J. Li, Q.G. Fu, S.P. Li, and F. Deng, The Effect of Zirconium Carbide on Ablation of Carbon/Carbon Composites Under an Oxyacetylene Flame, Corros. Sci., 2011, 53(1), p 105-112
D. Zhao, C.R. Zhang, H.F. Hu, and Y.D. Zhang, Ablation Behavior and Mechanism of 3D C/ZrC Composite in Oxyacetylene Torch Environment, Compos. Sci. Technol., 2011, 71(11), p 1392-1396
S.F. Tang, J.Y. Deng, S.J. Wang, W.C. Liu, and K. Yang, Ablation Behaviors of Ultra-high Temperature Ceramic Composites, Mater. Sci. Eng. A, 2007, 465(1-2), p 1-7
W.G. Fahrenholtz, G.E. Hilmas, I.G. Talmy, and A. Zaykoski, Refractory Diborides of Zirconium and Hafnium, J. Am. Ceram. Soc., 2007, 90(5), p 1347-1364
A. Rezaie, W.G. Fahrenholtz, and G.E. Hilmas, Evolution of Structure During the Oxidation of Zirconium Diboride-Silicon Carbide in Air Up to 1500 °C, J. Eur. Ceram. Soc., 2007, 27(6), p 2495-2501
A.L. Chamberlain, W.G. Fahrenholtz, G.E. Hilmas, and D.T. Ellerby, High-Strength Zirconium Diboride-Based Ceramics, J. Am. Ceram. Soc., 2004, 87(6), p 1170-1172
D.X. Wu, S.M. Dong, Y.S. Ding, X.Y. Zhang, Z. Wang, and H.J. Zhou, Preparation and Property of SiC/(ZrB2-SiC/SiC)4 Anti-oxidation Coating for Cf/SiC Composites, J. Inorg. Mater., 2009, 24(4), p 836-840 (in Chinese)
H.B. Li, L.T. Zhang, L.F. Cheng, and Y.G. Wang, Ablation Resistance of Different Coating Structure for C/ZrB2-SiC Composites Under Oxyacetylene Torch Flame, Int. J. Appl. Technol., 2009, 6(2), p 145-150
M. Tului, G. Marino, and T. Valente, Plasma Spray Deposition of Ultra High Temperature Ceramics, Surf. Coat. Technol., 2006, 201(5), p 2103-2108
C. Bartuli, T. Valente, and M. Tului, Plasma Spray Deposition and High Temperature Characterization of ZrB2-SiC Protective Coatings, Surf. Coat. Technol., 2002, 155(2-3), p 260-273
Y. Bai, Z.H. Han, H.Q. Li, C. Xu, Y.L. Xu, C.H. Ding, and J.F. Yang, Structure-Property Differences Between Supersonic and Conventional Atmospheric Plasma Sprayed Zirconia Thermal Barrier Coatings, Surf. Coat. Technol., 2011, 205(13-14), p 3833-3839
Y. Bai, Z.H. Han, H.Q. Li, C. Xu, Y.L. Xu, Z. Wang, C.H. Ding, and J.F. Yang, High Performance Nanostructured ZrO2 Based Thermal Barrier Coatings Deposited by High Efficiency Supersonic Plasma Spraying, Appl. Surf. Sci., 2011, 257(16), p 7210-7216
Q.G. Fu, H.J. Li, X.H. Shi, K.Z. Li, and G.D. Sun, Silicon Carbide Coating to Protect Carbon/Carbon Composites Against Oxidation, Scr. Mater., 2005, 52(9), p 923-927
J.C. Han, P. Hu, X.H. Zhang, S.H. Meng, and W.B. Han, Oxidation-Resistant ZrB2-SiC Composites at 2200 °C, Compos. Sci. Technol., 2008, 68(3-4), p 799-806
Acknowledgments
This work has been supported by the National Natural Science Foundation of China under Grant No. 50902111 and 51272213, and NPU Foundation for Fundamental Research and the Research Fund of the State Key Laboratory of Solidification Processing (NWPU), China (Grant No. 73-QP-2010).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yao, X., Li, H., Zhang, Y. et al. Ablation Behavior of ZrB2-Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites Under Oxyacetylene Torch. J Therm Spray Tech 22, 531–537 (2013). https://doi.org/10.1007/s11666-013-9913-z
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11666-013-9913-z