Log in

The Anodic Role of Ni-Containing LPSO Phases During the Microgalvanic Corrosion of Mg98Gd1.5Ni0.5 Alloy

  • Published:
Journal of Materials Engineering and Performance Aims and scope Submit manuscript

Abstract

In the present study, the corrosion characteristics of cast Mg98Gd1.5Ni0.5 alloy with Ni-containing long-period stacking ordered (LPSO) structures were investigated. The results reveal that the Ni-containing LPSO phases were more active than the Mg matrix and preferentially eroded during the immersion process. This behavior indicates that the Ni-containing LPSO phases could have acted as microanodes, in contrast to the cathodic role of the Ni-free LPSO phases in other Mg alloys. Furthermore, the potential difference of approximately 600 mV between the phases accelerated the dissolution rate of the LPSO phase. Corrosion of the Mg matrix also occurred due to the inhomogeneous microstructure of the matrix. The synergetic corrosion between the Ni-containing LPSO phases and the enrichment of Cl in the thick corrosion product films dominated the propagation of corrosion, which substantially deteriorated the corrosion resistance and accelerated the corrosion process of the Mg98Gd1.5Ni0.5 alloy.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Spain)

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9

Similar content being viewed by others

References

  1. Z.Q. Zhang, X. Liu, W.Y. Hu, J.H. Li, Q.C. Le, L. Bao, Z.J. Zhu, and J.Z. Cui, Microstructures, Mechanical Properties and Corrosion Behaviors of Mg-Y-Zn-Zr Alloys with Specific Y/Zn Mole Ratios, J. Alloys Compd., 2015, 624, p 116–125

    Article  Google Scholar 

  2. C.Q. Li, D.K. Xu, Z.R. Zeng, B.J. Wang, L.Y. Sheng, X.B. Chen, and E.H. Han, Effect of Volume Fraction of LPSO Phases on Corrosion and Mechanical Properties of Mg-Zn-Y Alloys, Mater. Des., 2017, 121, p 430–441

    Article  Google Scholar 

  3. J.S. Zhang, J.D. Xu, W.L. Cheng, C.J. Chen, and J.J. Kang, Corrosion Behavior of Mg–Zn–Y Alloy with Long-Period Stacking Ordered Structures, J. Mater. Sci. Technol., 2012, 28, p 1157–1162

    Article  Google Scholar 

  4. P. Pérez, S. Cabeza, G. Garcés, and P. Adeva, Influence of Long Period Stacking Ordered Phase Arrangements on the Corrosion Behaviour of Extruded Mg97Y2Zn1 Alloy, Corros. Sci., 2016, 107, p 107–112

    Article  Google Scholar 

  5. S. Izumi, M. Yamasaki, and Y. Kawamura, Relation Between Corrosion Behavior and Microstructure of Mg-Zn-Y Alloys Prepared by Rapid Solidification at Various Cooling Rates, Corros. Sci., 2009, 51, p 395–402

    Article  Google Scholar 

  6. T.B. Abbott, Magnesium: Industrial and Research Developments over the Last 15 Years, Corrosion, 2015, 71, p 120–127

    Article  Google Scholar 

  7. Y. Kawamura, K. Hayashi, A. Inoue, and T. Masumoto, Rapidly Solidified Powder Metallurgy Mg97Zn1Y2 Alloys with Excellent Tensile Yield Strength Above 600 MPa, Mater. Trans., 2001, 42, p 1172–1176

    Article  Google Scholar 

  8. S. González, P. Pérez, G. Garcés, and P. Adeva, Influence of the Processing Route on the Mechanical Properties at High Temperatures of Mg-Ni-Y-RE Alloys Containing LPSO-Phases, Mater. Sci. Eng. A, 2016, 673, p 266–279

    Article  Google Scholar 

  9. J. Yin, C.H. Lu, X.J. Ma, B.Y. Dai, and H.L. Chen, Investigation of Two-Phase Mg-Gd-Ni Alloys with Highly Stable Long Period Stacking Ordered Phases, Intermetallics, 2016, 68, p 63–70

    Article  Google Scholar 

  10. H. Liu, F. Xue, J. Bai, J. Zhou, and X.D. Liu, Effect of Substitution of 1 at % Ni for Zn on the Microstructure and Mechanical Properties of Mg94Y4Zn2 Alloy, Mater. Sci. Eng. A, 2013, 585, p 387–395

    Article  Google Scholar 

  11. S.Z. Wu, J.S. Zhang, Z.F. Zhang, C.X. Xu, K.B. Nie, and X.F. Niu, A High Strength and Good Ductility Mg–Y–NI–TI, Alloy with Long Period Stacking Ordered Structure Processed by Hot Rolling and Aging Treatment, Mater. Sci. Eng. A, 2015, 648, p 134–139

    Article  Google Scholar 

  12. T. Itoi, K. Takahashi, H. Moriyama, and M. Hirohashi, A High-Strength Mg–Ni–Y Alloy Sheet with a Long-Period Ordered Phase Prepared by Hot-Rolling, Scr. Mater., 2008, 59, p 1155–1158

    Article  Google Scholar 

  13. X. Yang, S.S. Wu, S.L. Lü, L.Y. Hao, and X.G. Fang, Effects of Ni Levels on Microstructure and Mechanical Properties of Mg-Ni-Y Alloy Reinforced with LPSO Structure, J. Alloys Comp., 2017, 726, p 276–283

    Article  Google Scholar 

  14. J. Wang, J.S. Zhang, X.M. Zong, C.X. Xu, Z.Y. You, and K.B. Nie, Effect of Ca on the Formation of LPSO Phase and Mechanical Propertical of Mg-Zn-Y-Mn Alloy, Mater. Sci. Eng. A, 2015, 648, p 37–40

    Article  Google Scholar 

  15. Z.W. Geng, D.H. **ao, and L. Chen, Microstructure, Mechanical Properties, and Corrosion Behavior of Degradable Mg-Al-Cu-Zn-Gd Alloys, J. Alloys Comp., 2016, 686, p 145–152

    Article  Google Scholar 

  16. L. Yan, H.S. Wu, and Y. Yan, Application of Fine Managed Pressure Drilling Technique in Complex Wells with Both Blowout and Lost Circulation Risks, Nat. Gas Ind. B, 2015, 2, p 192–197

    Article  Google Scholar 

  17. Y.Z. Zhang, X.Y. Wang, Y.F. Kuang, B.S. Liu, K.W. Zhang, and D.Q. Fang, Enhanced Mechanical Properties and Degradation Rate of Mg-3Zn-1Y Based Alloy by Cu Addition for Degradable Fracturing Ball Applications, Mater. Lett., 2017, 195, p 194–197

    Article  Google Scholar 

  18. N. Hort, Y. Huang, D. Fechner, M. Stömer, C. Blawert, F. Witte, C. Vogt, H. Drücker, R. Willumeit, K.U. Kainer, and F. Feyerabend, Magnesium Alloys as Implant Materials-Principles of Property Design for Mg-RE Alloys, Acta Biomater., 2010, 6, p 1714–1725

    Article  Google Scholar 

  19. J.H. Liu, Y.W. Song, J.C. Chen, P. Chen, D.Y. Shan, and E.H. Han, The Special Role of Anodic Second Phases in the Micro-galvanic Corrosion of EW75 Mg Alloy, Electro. Acta, 2016, 189, p 190–195

    Article  Google Scholar 

  20. Y.W. Song, D.Y. Shan, and E.H. Han, Pitting Corrosion of a Rare Earth Mg Alloy GW93, J. Mater. Sci. Technol., 2017, 33, p 954–960

    Article  Google Scholar 

  21. J. Chen, Y.W. Song, D.Y. Shan, and E.H. Han, Study of the Corrosion Mechanism of the In Situ Grown Mg–Al–CO 2-3 Hydrotalcite Film on AZ31 Alloy, Corros. Sci., 2012, 65, p 268–277

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported by the National Natural Science Foundation of China (Grant No. 51401160), the China Postdoctoral Science Foundation (Grant No. 2015M582688), the Innovation Chain of Key Industries in Shaanxi–Industrial Field Project [2016KTZDGY09-06-02] and the Key Research and Development Plan of Shaanxi Province [2018ZDXM-GY-123].

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Zhenhua Han.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Han, Z., Zhang, K., Yang, J. et al. The Anodic Role of Ni-Containing LPSO Phases During the Microgalvanic Corrosion of Mg98Gd1.5Ni0.5 Alloy. J. of Materi Eng and Perform 28, 2451–2458 (2019). https://doi.org/10.1007/s11665-019-04018-x

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11665-019-04018-x

Keywords

Navigation