Abstract
The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many TE, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide end-users with realistic values for how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated a lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method, and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, different systems often showed large differences that are likely caused by uncertain heat loss and thermal resistance. Efficiency testing is an important capability for the thermoelectric community to improve. A follow-up international standardization effort is planned.
Similar content being viewed by others
References
G.J Snyder, Thermoelectric Handbook, Chapter 9, ed. D.M. Rowe (Boca Raton, FL: CRC Press, 2006).
A.B. Putilin and E.A. Yuragov, Meas. Tech. 46, 1173 (2003).
H. Wang, W.D. Porter, H. Böttner, J. König, L. Chen, S. Bai, T. Tritt, A. Mayolett, J. Senawiratne, C. Smith, F. Harris, P. Gilbert, J. Sharp, J. Lo, H. Kleinke, and L. Kiss, J. Electron. Mater. 42, 654–664 (2013).
H. Wang, W.D. Porter, H. Böttner, J. König, L. Chen, S. Bai, T. Tritt, A. Mayolett, J. Senawiratne, C. Smith, F. Harris, P. Gilbert, J. Sharp, J. Lo, H. Kleinke, and L. Kiss, J. Electron. Mater. 42, 1073–1084 (2013).
R.L. Kallaher, C.A. Latham, and F. Sharifi, Rev. Sci. Instrum. 84, 013907 (2013).
L. Rauscher, H.T. Kaibe, H. Ishimabushi, S. Sand, E.W. Miiller, and D. Platzek, Proceedings of 22nd International Conference on Thermoelectrics (La Grande-Motte, France, 2003), pp. 508–511.
L.I. Anatychuk and M.V. Havrylyuk, J. Electron. Mater. 40, 1292 (2011).
B. Sherman, R.R. Heikes, and R.W. Ure, J. Appl. Phys. 31, 1 (1960).
K. Zabrocki, W. Seifert, and E. Muller, AIP Conf. Proc. 1449, 427 (2012).
Y. Kraftmakher, Eur. J. Phys. 26, 956–967 (2005).
G.J. Snyder and T.S. Ursell, Phys. Rev. Lett. 91, 148301 (2003).
A. Muto, D. Kraemer, Q. Hao, Z.F. Ren, and G. Chen, Rev. Sci. Instrum. 80, 093901 (2009).
H. Takazawa, H.Obara, Y.Okada, K.Kobayashi, T.Onishi, and T.Kajikawa, Proceedings of International Conference on Thermoelectrics (Vienna, Austria, 2006), pp. 189–192.
Kajikawa, T, Proceedings of 20th International Conference on Thermoelectrics (Bei**g, People’s Republic of China, 2001), pp. 49–56.
ASTM Designation: D 5470-01. Standard Test Method for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials (2001).
ASTM Designation: E 1225-99. Standard Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique (1999).
J.D. König, U. Nussel, M. Bartel, and U. Vetter (2010) Proceedings of 2009 MRS Fall Meeting, Symposium Z, pp. 1–19.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, H., McCarty, R., Salvador, J.R. et al. Determination of Thermoelectric Module Efficiency: A Survey. J. Electron. Mater. 43, 2274–2286 (2014). https://doi.org/10.1007/s11664-014-3044-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11664-014-3044-2