Log in

Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect

  • Article
  • Published:
Science China Technological Sciences Aims and scope Submit manuscript

Abstract

In this paper, two different designs, with dummy slots and bread-loaf magnets techniques, are presented to reduce the electromagnetic vibration in integral-slot surface-mounted permanent-magnet (SPM) machines. Firstly, the stator slotting effect on the magnetic field modulation and radial force modulation is investigated. It reveals the amplitude of the modulated magnetic field and modulated radial force is greatly affected by the slot opening effect, while the spatial order is closely associated with the slot numbers. Subsequently, the dummy slots and bread-loaf magnets design are developed for a 36-slot/12-pole integral-slot SPM machine to reduce the electromagnetic vibration. Finally, two SPM machines, with conventional and bread-loaf magnets, are manufactured. Experimental tests are carried out to validate the theoretical analyses.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Germany)

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Ma Y, Wang J, Zhou L, et al. Surrogate-assisted optimization of a five-phase SPM machine with quasi-trapezoidal PMs. IEEE Trans Ind Electron, 2022, 69: 202–212

    Article  Google Scholar 

  2. Liu T, Zhao W, Ji J, et al. Effects of eccentric magnet on high-frequency vibroacoustic performance in integral-slot SPM machines. IEEE Trans Energy Convers, 2021, 36: 2393–2403

    Article  Google Scholar 

  3. Zhu J, Zuo Y, Chen H, et al. Deep-investigated analytical modeling of a surface permanent magnet vernier motor. IEEE Trans Ind Electron, 2021, doi: https://doi.org/10.1109/TIE.2021.3134075

  4. Dong Q C, Liu X T, Qi H Z, et al. Analysis and evaluation of electromagnetic vibration and noise in permanent magnet synchronous motor with rotor step skewing. Sci China Tech Sci, 2019, 62: 839–848

    Article  Google Scholar 

  5. Ji Z, Cheng S, Lv Y, et al. The mechanism for suppressing high-frequency vibration of multiphase surface permanent magnet motors via PWM carrier phase shifting. IEEE Trans Power Electron, 2021, 36: 10504–10513

    Article  Google Scholar 

  6. Zhu S, Zhao W, Liu G, et al. Effect of phase shift angle on radial force and vibration behavior in dual three-phase PMSM. IEEE Trans Ind Electron, 2021, 68: 2988–2998

    Article  Google Scholar 

  7. Zou J, Lan H, Xu Y, et al. Analysis of global and local force harmonics and their effects on vibration in permanent magnet synchronous machines. IEEE Trans Energy Convers, 2017, 32: 1523–1532

    Article  Google Scholar 

  8. Ito F, Takeuchi K, Kotsugai T, et al. A study on asymmetry of electromagnetic force modes of permanent magnet synchronous motors with rotor eccentricity. IEEE Trans Magn, 2021, 57: 1–6

    Google Scholar 

  9. Lu Y, Li J, Qu R, et al. Electromagnetic force and vibration study on axial flux permanent magnet synchronous machines with dual three-phase windings. IEEE Trans Ind Electron, 2020, 67: 115–125

    Article  Google Scholar 

  10. Deng W, Zuo S. Electromagnetic vibration and noise of the permanent-magnet synchronous motors for electric vehicles: An overview. IEEE Trans Transp Electrific, 2019, 5: 59–70

    Article  Google Scholar 

  11. Yang H, Chen Y. Influence of radial force harmonics with low mode number on electromagnetic vibration of PMSM. IEEE Trans Energy Convers, 2014, 29: 38–45

    Article  Google Scholar 

  12. EL-Refaie A M. Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges. IEEE Trans Ind Electron, 2010, 57: 107–121

    Article  Google Scholar 

  13. Valavi M, Le Besnerais J, Nysveen A. An investigation of zeroth-order radial magnetic forces in low-speed surface-mounted permanent magnet machines. IEEE Trans Magn, 2016, 52: 1–6

    Article  Google Scholar 

  14. Wang S, Hong J, Sun Y, et al. Analysis of zeroth-mode slot frequency vibration of integer slot permanent-magnet synchronous motors. IEEE Trans Ind Electron, 2020, 67: 2954–2964

    Article  Google Scholar 

  15. Besnerais J. Vibroacoustic analysis of radial and tangential air-gap magnetic forces in permanent magnet synchronous machines. IEEE Trans Magn, 2015, 51: 8105609

    Article  Google Scholar 

  16. Fang H, Li D, Guo J, et al. Hybrid model for electromagnetic vibration synthesis of electrical machines considering tooth modulation and tangential effects. IEEE Trans Ind Electron, 2021, 68: 7284–7293

    Article  Google Scholar 

  17. Zhu S, Zhao W, Ji J, et al. Investigation of bread-loaf magnet on vibration performance in FSCW PMSM considering force modulation effect. IEEE Trans Transp Electrific, 2021, 7: 1379–1389

    Article  Google Scholar 

  18. Wang S, Hong J, Sun Y, et al. Mechanical and magnetic pivot roles of tooth in vibration of electrical machines. IEEE Trans Energy Convers, 2021, 36: 139–148

    Article  Google Scholar 

  19. Lin F, Zuo S G, Deng W Z, et al. Reduction of vibration and acoustic noise in permanent magnet synchronous motor by optimizing magnetic forces. J Sound Vib, 2018, 429: 193–205

    Article  Google Scholar 

  20. Zhao W, Zhu S, Ji J, et al. Analysis and reduction of electromagnetic vibration in fractional-slot concentrated-windings PM machines. IEEE Trans Ind Electron, 2022, 69: 3357–3367

    Article  Google Scholar 

  21. Ma J, Zhu Z Q. Mitigation of unbalanced magnetic force in a PM machine with asymmetric winding by inserting auxiliary slots. IEEE Trans Ind Appl, 2018, 54: 4133–4146

    Article  Google Scholar 

  22. Jafarboland M, Farahabadi H B. Optimum design of the stator parameters for noise and vibration reduction in BLDC motor. IET Electric Power Appl, 2018, 12: 1297–1305

    Article  Google Scholar 

  23. Wang S, Hong J, Sun Y, et al. Analysis and reduction of electromagnetic vibration of PM brush DC motors. IEEE Trans Ind Applicat, 2019, 55: 4605–4612

    Article  Google Scholar 

  24. Zuo S, Lin F, Wu X. Noise analysis, calculation, and reduction of external rotor permanent-magnet synchronous motor. IEEE Trans Ind Electron, 2015, 62: 6204–6212

    Article  Google Scholar 

  25. Zhao G, Hua W, Zhu X, et al. The Influence of dummy slots on stator surface-mounted permanent magnet machines. IEEE Trans Magn, 2017, 53: 1–5

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Wen**ang Zhao.

Additional information

This work was supported by the National Natural Science Foundation of China (Grant Nos. 51991383 and 52025073).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhu, S., Zhao, W., Ji, J. et al. Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect. Sci. China Technol. Sci. 65, 1867–1877 (2022). https://doi.org/10.1007/s11431-022-2089-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-022-2089-y

Keywords

Navigation