Abstract
In this article, the authors present their point of view on whether an analogy can be drawn between nano and classical microcomposites. Their opinion corresponds with a 25-year-old opinion article by Calvert and is based on their own extensive studies and a large body of studies in the scientific literature. They propose that polymer nanocomposites are in fact quasi-homogeneous molecular blends, which ought to be regarded as molecular composites or self-reinforced polymers. Hence, the micromechanical models of classical composites may not generally apply to nanocomposites, where—instead—the interactions on a molecular scale between the nanoparticles and the polymer matrix control the properties. A few examples, including of nucleation and confinement by nanoparticles, are discussed.
Similar content being viewed by others
References
Calvert P (1992) Strength in disunity. Nature 357:365–366
Ma PC, Siddiqui NA, Marom G, Kim JK (2010) Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review. Compos Part A Appl Sci Manuf 41:1345–1367
Stern N, Marom G, Zhang L, Hu X (2017) Micromechanics of nanocomposites in nanocomposites and multifunctional materials. In: Ton Peijs and Eric Thostenson, Eds. in the 2nd edition of comprehensive composite materials, Carl Zweben and Peter Beaumont, Eds.-in-Chief, Elsevier
Hu H, Onyebueke L, Abatan A (2010) Characterizing and modeling mechanical properties of nanocomposites—review and evaluation. J Miner Mater Charact Eng 9:275–319
Sun L, Gibson RF, Gordaninejad F, Suhr J (2009) Energy absorption capability of nanocomposites: a review. Compos Sci Technol 69:2392–2409
Kumar SK, Krishnamoorti R (2010) Nanocomposites: structure, phase behavior, and properties. Annu Rev Chem Biomol Eng 1:37–58
Thostenson ET, Li C, Chou T-W (2005) Nanocomposites in context. Compos Sci Technol 65:491–516
Lyashenko T, Lerman N, Wolf A, Harel H, Marom G (2013) Improved mode II delamination fracture toughness of composite materials by selective placement of protein-surface treated CNT. Compos Sci Technol 85:29–35
Lyashenko-Miller T, Fitoussi J, Marom G (2016) The loading rate effect on mode II fracture toughness of composites interleaved with CNT nanocomposites. Nanocomposites 2:1–7
Sui X-M, Wagner HD (2009) Tough nanocomposites: the role of carbon nanotube type. Nano Lett 9(4):1423–1426
Lachman N, Harel Y, Green A, Iuster N, Lellouche J-P, Wagner HD (2012) The effect of scale and surface chemistry on the mechanical properties of carbon nanotube-based composites. J Polym Sci Part B Polym Phys 50:957–962
Shtein M, Nadiv R, Lachman N, Wagner HD, Regev O (2013) Effect of novel dispersion and concentration determination methods on fracture behavior of nanotube-epoxy composites. Compos Sci Technol 87:157–163
Greenfeld I, Wagner HD (2015) Nanocomposite toughness, strength and stiffness—the role of filler geometry. Nanocomposites 1:3–17
Guevara-Morales A, Taylor AC (2014) Mechanical and dielectric properties of epoxy–clay nanocomposites. J Mater Sci 49:1574–1584. doi:10.1007/s10853-013-7840-5
Andrews R, Weisenberger M (2004) Carbon nanotube polymer composites. Curr Opin Solid State Mater Sci 8:31–37
Yudin VE, Svetlichnyi VM, Shumakov AN, Letenko DG, Feldman AY, Marom G (2005) The nucleating effect of carbon nanotubes on crystallinity in R-BAPB-type thermoplastic polyimide. Macromol Rapid Commun 26:885–888
Yudin VE, Feldman AY, Svetlichnyi VM, Shumakov AN, Marom G (2007) Crystallization of R-BAPB type polyimide modified by carbon nano-particles. Compos Sci Technol 67:789–794
Yudin VE, Svetlichnyi VM, Shumakov AN, Schechter R, Harel H, Marom G (2009) Morphology and mechanical properties of carbon fiber reinforced composites based on semicrystalline polyimides modified by carbon nanofibers. Compos Part A Appl Sci Manuf 39:85–90
Assouline E, Lustiger A, Barber A, Cooper CA, Klein E, Wachtel E, Wagner HD (2003) Nucleation ability of multi-wall carbon nanotubes in polypropylene composites. J Polym Sci Part B Polym Phys 41:520–527
Tanami GA, Kovalenko L, Chang CC, Rafailovich M, Marom G (2015) Morphology related bulk and surface mechanical properties of ultralow diameter VGCF–iPP monofilament nanocomposites under potential confinement conditions. Nanocomposites 1:18–26
Acknowledgements
We wish to thank the reviewer for suggesting that we refer to the scale limit of continuum models of polymer nanocomposites and for pointing out the example of ceramic nanocomposites.
We also would like to acknowledge partial support from the G.M.J. Schmidt Minerva Center of Supramolecular Architectures at the Weizmann Institute, and the China-Israel Science Foundations collaborative research grant. This research was also made possible in part by the generosity of the Harold Perlman family. H.D.W. is the recipient of the Livio Norzi Professorial Chair in Materials Science at the Weizmann Institute.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Marom, G., Daniel Wagner, H. Should polymer nanocomposites be regarded as molecular composites?. J Mater Sci 52, 8357–8361 (2017). https://doi.org/10.1007/s10853-017-1113-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-017-1113-7