Abstract
The effect of Ti, Zr and Hf minor additions on the alumina scale formation on a high-purity, FeCrAlY model alloy has been studied. Thermogravimetry at 1,200–1,300 °C in Ar–20%O2 and two-stage oxidation using 18O-tracer were combined with characterisation by electron microscopy and sputtered neutral mass spectroscopy. After oxidation, the incorporation of Hf and Zr into the scale was far more substantial than that of Ti. This is explained by the higher thermodynamic stability of the Zr- and Hf-based oxides because the incorporation occurred to a large extent via an internal oxidation process. The scale growth kinetics is accelerated by incorporation of zirconia precipitates that provide short-circuit paths for oxygen diffusion, reduce the scale grain size and cause formation of porosity. In contrast, the incorporation of Hf-containing oxides has no such accelerative effect on the scale growth kinetics.
Similar content being viewed by others
References
Whittle DP, Stringer J (1980) Philos Trans R Soc Lond A 295:309
Quadakkers WJ, Bennett MJ (1994) Mater Sci Technol 10:126
Smeggil JG, Funkenbusch AW, Bornstein NS (1986) Met Trans A 17:923
Hou PY, Stringer J (1992) Oxid Met 38(5/6):323
Quadakkers WJ, Holzbrecher H, Briefs KG et al (1989) Oxid Met 32(1/2):67
Pint BA (1996) Oxid Met 45(1/2):1
Nychka JA, Clarke DR (2005) Oxid Met 63(5/6):325
Pint BA (2003) J Am Ceram Soc 86(4):686
Quadakkers WJ, Naumenko D, Singheiser L et al (2000) Mater Corros 51:350
Klöwer J, Kolb-Telieps A, Brede M (1997) In: Bode H (ed) Proceedings of the international conference on metal supported automotive catalytic converters. Werkstoff-Informationsgesselschaft mbH, Frankfurt, pp 33–46
Ishii K, Kohno M, Ishikawa S, Satoh S (1997) Mater Trans JIM 38(9):787
Gray T H (1997) In: Bode H (ed) Proceedings of the international conference on metal supported automotive catalytic converters. Werkstoff-Informationsgesselschaft mbH, Frankfurt, pp 47–54
Kochubey V, Naumenko D, Wessel E et al (2006) Mater Let 60:1654
Reddy KPR, Smialek JL, Cooper AR (1982) Oxid Met 17(5/6):429
Basu SN, Halloran JW (1987) Oxid Met 27(3/4):143
Quadakkers WJ, Naumenko D, Wessel E et al (2004) Oxid Met 61(1/2):17
Quadakkers WJ (1990) Mater Corros 41:659
Liu Z, Gao W, He Y (2000) Oxid Met 53(3/4):341
Naumenko D, Gleeson B, Wessel E et al (2007) Metal Mater Trans 38A:2974
Domagala RF, Rausch JJ, Levinson DW (1961) Trans ASM 53:139
Arias D, Abriata JP (1988) Bull Alloy Phase Diag 95:597
Okamoto H (1993) In: Okamoto H (ed) Phase diagrams of binary iron alloys. ASM International, Materials Park, OH, USA, pp 12–28
Kofstad P (1988) High temperature corrosion. Elsevier Applied Science Publishers, Barking, UK
Pint BA (1997) Oxid Met 48(3/4):303
Mommer N, Lee T, Gardner JA (2000) J Mater Res 15(2):377
Wessel E, Kochubey V, Naumenko D et al (2004) Scr Mater 51(10):987
Megusar J, Meier GH (1976) Metal Trans 7A:1133
Izumi T, Mu N, Zhang L, Gleeson B (2007) Surf Coat Technol 202:628
Acknowledgements
The authors are grateful to J. Le-Coze from Ecole des Mines de Saint-Etienne for manufacturing of the high-purity model alloys and to E. Wessel from Forschungszentrum Jülich GmbH for the SEM studies. Part of the work was performed in the EU project SMILER (Project No. G5RD-CT-2001-00530). D. Naumenko would like to thank the Deutsch Forschungsgemeinschaft (DFG) for the financial support of his work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Naumenko, D., Kochubey, V., Niewolak, L. et al. Modification of alumina scale formation on FeCrAlY alloys by minor additions of group IVa elements. J Mater Sci 43, 4550–4560 (2008). https://doi.org/10.1007/s10853-008-2639-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-2639-5