Summary
A weathering classification for granitic rock materials from southeastern Brazil was framed based on core characteristics. The classification was substantiated by a detailed petrographic study. Indirect assessment of weathering grades by density, ultrasonic and Schmidt hammer index tests was performed. Rebound values due to Schmidt hammer multiple impacts at one representative point were more efficient in predicting weathering grades than averaged single impact rebound values, P-wave velocities and densities.
Uniaxial compression tests revealed that a large range of uniaxial compressive strength (214–153 MPa) exists in Grade I category where weathering does not seem to have played any role. It was concluded that variability in occurrences of quartz intragranular cracks and in biotite percentage, distribution and orientation might have played a key role in accelerating or decelerating the failure processes of the Grade I specimens. Deterioration of uniaxial compressive strength and elastic modulus and increase in Poisson’s ratio with increasing weathering intensity could be attributed to alteration of minerals, disruption of rock skeleton and microcrack augmentation. A crude relation between failure modes and weathering grades also emerged.
Similar content being viewed by others
References
U Akesson J Hansson J Stigh (2004) ArticleTitleCharacterization of microcracks in the Bohus granite, western Sweden, caused by uniaxial cyclic loading Engng Geol 72 131–142 Occurrence Handle10.1016/j.enggeo.2003.07.001
InstitutionalAuthorNameANON (1995) ArticleTitleThe description and classification of weathered rocks for engineering purposes: Geological Society Engineering Group Working Party Report Q J Eng Geol 28 207–242 Occurrence Handle10.1144/GSL.QJEGH.1995.028.P3.02
ASTM (American Society for Testing and Materials) (2001) Standard test method for unconfined compressive strength of intact rock core specimens, Designation D2938
ASTM (American Society for Testing and Materials) (2001) Standard test method for elastic moduli of intact rock core specimens in uniaxial compression, Designation D3148
ASTM (American Society for Testing and Materials) (2001) Standard practice for preparing rock core specimens and determining dimensional and shape tolerances, Designation D4543
ASTM (American Society for Testing and Materials) (2001) Standard method for determination of the point load strength index of rock, Designation D 5731
A Aydin A Basu (2005) ArticleTitleThe Schmidt hammer in rock material characterization Engng Geol 81 1–14 Occurrence Handle10.1016/j.enggeo.2005.06.006
A Aydin NS Duzgoren-Aydin (2002) ArticleTitleIndices for scaling and predicting weathering-induced changes in rock properties Env Eng Geosc VIII 121–135
Basu A (2006) Mechanical characterization of granitic rocks of Hong Kong by improved index testing procedures with reference to weathering induced microstructural changes. PhD Thesis, The University of Hong Kong, Hong Kong
A Basu A Aydin (2004) ArticleTitleA method for normalization of Schmidt hammer rebound values Int J Rock Mech Min Sci 41 1211–1214 Occurrence Handle10.1016/j.ijrmms.2004.05.001
FJ Baynes WR Dearman (1978) ArticleTitleThe relationship between the microfabric and the engineering properties of weathered granite Bull Int Assoc Engng Geol 18 191–197 Occurrence Handle10.1007/BF02635370
BS (British Standard) (1999) Code of practice for site investigations, No. 5930
GH Davis SJ Reynolds (1996) Structural geology of rocks and regions John Wiley New York
Dearman WR, Irfan TY (1978) Assessment of the degree of weathering in granite using petrographic and physical index tests. Proc. Int. Symp. on Deterioration and Protection of Stone Monuments, Paris, pp 1–35
Deere DU, Miller RP (1966) Engineering classification and index properties for intact rock. Tech. Rep. No. AFWL-TR-65-116, Air Force Weapons Lab., New Mexico
E Eberhardt B Stimpson D Stead (1999) ArticleTitleEffects of grain size on the initiation and propagation thresholds of stress-induced brittle fractures Rock Mech Rock Engng 32 IssueID2 81–99 Occurrence Handle10.1007/s006030050026
Ebuk EJ (1991) The influence of fabric on the shear strength characteristics of weathered granites. PhD Thesis, The University of Leeds, United Kingdom
Gamon TI (1985) The influence of weathering on the engineering properties of the Hong Kong granite. PhD Thesis, The University of Newcastle upon Tyne, United Kingdom
AS Gupta KS Rao (2000) ArticleTitleWeathering effects on the strength and deformational behavior of crystalline rocks under uniaxial compression Engng Geol 56 257–274 Occurrence Handle10.1016/S0013-7952(99)00090-3
Hamrol A (1961) A quantitative classification of weathering and weatherability of rocks. Proc. 5th Int. Conf. Soil Mech. Found Engng., Vol. 7, pp 771–774
Hencher SR, Martin RP (1982) The description and classification of weathered rocks in Hong Kong for engineering purposes. Proc. 7th SE Asian Geotech. Conf., Hong Kong, pp 125–142
CS Hutchison (1974) Laboratory handbook of petrographic techniques John Wiley New York
IPT (Instituto de Pesquisas Tecnológicas) (1981) Mapa Geológico do Estado de São Paulo
TY Irfan (1996) ArticleTitleMineralogy, fabric properties and classification of weathered granites in Hong Kong Q J Eng Geol 29 5–35 Occurrence Handle10.1144/GSL.QJEGH.1996.029.P1.02
TY Irfan WR Dearman (1978) ArticleTitleEngineering classification and index properties of a weathered granite Bull Assoc Engng Geol 17 79–90 Occurrence Handle10.1007/BF02634696
TY Irfan GE Powell (1985) ArticleTitleEngineering geological investigations for pile foundation on a deeply weathered granitic rock in Hong Kong Bull Assoc Engng Geol 32 67–80 Occurrence Handle10.1007/BF02594767
InstitutionalAuthorNameISRM, (International Society for Rock Mechanics) (1979) ArticleTitleSuggested methods for determining the uniaxial compressive strength and deformability of rock materials Int J Rock Mech Min Sci Geomech Abstr 16 135–140
C Karpuz AG Pasamehmetoglu (1997) ArticleTitleField characterization of weathered Ankara andesites Eng Geol 46 1–17 Occurrence Handle10.1016/S0013-7952(96)00002-6
RL Kranz (1983) ArticleTitleMicrocracks in rocks: a review Tectonophysics 100 449–480 Occurrence Handle10.1016/0040-1951(83)90198-1
FH Kulhawy (1975) ArticleTitleStress deformation properties of rock and rock discontinuities Eng Geol 9 327–350 Occurrence Handle10.1016/0013-7952(75)90014-9
JSO Lau NA Chandler (2004) ArticleTitleInnovative laboratory testing Int J Rock Mech Min Sci 41 1427–1445 Occurrence Handle10.1016/j.ijrmms.2004.09.008
Li L (2001) Microscopic study and numerical simulation of the failure process of granite. PhD Thesis, The University of Hong Kong, Hong Kong
L Li PKK Lee Y Tsui LG Tham CA Tang (2003) ArticleTitleFailure process of granite Int J Geomech 3 84–98 Occurrence Handle10.1061/(ASCE)1532-3641(2003)3:1(84)
P Lumb (1983) ArticleTitleEngineering properties of fresh and decomposed igneous rocks from Hong Kong Eng Geol 19 81–94 Occurrence Handle10.1016/0013-7952(83)90027-3
Martin RP (1986) Use of index tests for engineering assessment of weathered rocks. Proc. 5th Int. IAEG Cong., Buenos Aires, Vol. 1, pp 433–450
Martin RP, Hencher SR (1986) Principles for description and classification of weathered rocks for engineering purposes. Site Investigation Practice: Assessing BS5930, Geological Society, London, Eng. Geol. Spec. Pub., Vol. 2, pp 299–308
de Mello VFB (1972) Thoughts on soil engineering applicable to residual soils. Proc. 3rd Southeast Asian Conf. Soil Eng., Hong Kong, pp 5–34
DG Moye (1955) ArticleTitleEngineering geology for the Snowy Mountain scheme J Inst Eng 27 287–298
T Nishiyama Y Chen H Kusuda T Ito K Kaneko H Kita T Sato (2002) ArticleTitleThe examination of fracturing process subjected to triaxial compression test in Inada granite Engng Geol 66 257–269 Occurrence Handle10.1016/S0013-7952(02)00046-7
LF Vaz (1996) ArticleTitleClassificaçao genética de solos e horizontes de alteraçao de rocha em regiões tropicais Rev Bras Geotec 19 117–136
Zuquette LV, Pejon OJ, Sinelli O (1994) Engineering geological zoning of São Paulo State (Brazil) – Scale 1:500,000. Proc. 7th Int. IAEG Cong., pp 1187–1195
Author information
Authors and Affiliations
Corresponding author
Additional information
Correspondence: Prof. T. B. Celestino, Universidade de São Paulo, São Carlos, Brazil
Rights and permissions
About this article
Cite this article
Basu, A., Celestino, T. & Bortolucci, A. Evaluation of rock mechanical behaviors under uniaxial compression with reference to assessed weathering grades. Rock Mech Rock Eng 42, 73–93 (2009). https://doi.org/10.1007/s00603-008-0170-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-008-0170-2