Summary
Discontinuities or joints in the rock mass have various shapes and sizes. Along with the joint orientation and spacing, the joint persistence, or the relative size of the joint, is one of the most important factors in determining the block sizes of jointed rock masses. Although the importance of joint persistence on the overall rock mass strength has long been identified, the impact of persistence on rock strength is in most current rock mass classification systems underrepresented. If joints are assumed to be persistent, as is the case in most designs, the sizes of the rock blocks tend to be underestimated. This can lead to more removable blocks than actually exist in-situ. In addition, a poor understanding of the rock bridge strength may lead to lower rock mass strengths, and consequently, to excessive expenditure on rock support.
In this study, we suggest and verify a method for the determination of the block sizes considering joint persistence. The idea emerges from a quantitative approach to apply the GSI system for rock mass classification, in which the accurate block size is required. There is a need to statistically analyze how the distribution of rock bridges according to the combination of joint orientation, spacing, and persistence will affect the actual size of each individual block. For this purpose, we generate various combinations of joints with different geometric conditions by the orthogonal arrays using the distinct element analysis tools of UDEC and 3DEC. Equivalent block sizes (areas in 2D and volumes in 3D) and their distributions are obtained from the numerical simulation. Correlation analysis is then performed to relate the block sizes predicted by the empirical equation to those obtained from the numerical model simulation. The results support the concept of equivalent block size proposed by Cai et al. (2004, Int. J. Rock Mech. Min. Sci., 41(1), 3–19).
Similar content being viewed by others
References
N. R. Barton R. Lien J. Lunde (1974) ArticleTitleEngineering classification of rock masses for the design of tunnel support Rock Mech. 6 IssueID4 189–239 Occurrence Handle10.1007/BF01239496
Z. T. Bieniawski (1973) ArticleTitleEngineering classification of jointed rock masses Trans S. Afr. Inst. Civ. Engrs. 15 335–344
Bieniawski, Z. T. (1976): Rock mass classification in rock engineering. In: Proc. Symp. on Exploration for Rock Engineering, Balkema, Cape Town, 97–106.
B. H. G. Brady E. T. Brown (1992) Rock Mechanics for Underground Mining Champman & Hall London 569
M. Cai H. Horii (1992) ArticleTitleA constitutive model of highly jointed rock masses Mech. Mater. 13 217–246 Occurrence Handle10.1016/0167-6636(92)90004-W
Cai, M., Kaiser, P. K. (2006): Visualization of rock mass classification systems. Geotechn. Geol. Engng. (in press).
M. Cai P. K. Kaiser H. Uno Y. Tasaka M. Minami (2004) ArticleTitleEstimation of rock mass strength and deformation modulus of jointed hard rock masses using the GSI system Int. J. Rock Mech. Min. Sci. 41 IssueID1 3–19 Occurrence Handle10.1016/S1365-1609(03)00025-X
W. S. Dershowitz H. H. Einstein (1988) ArticleTitleCharacterizing rock joint geometry with joint system models Rock Mech. Rock Engng. 21 21–51 Occurrence Handle10.1007/BF01019674
J. L. Devore (2000) Probability and statistics for engineering and sciences Thomson Learning Duxbury
M. S. Diederichs P. K. Kaiser (1999) ArticleTitleTensile strength and abutment relaxation as failure control mechanisms in underground excavations Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 36 69–96 Occurrence Handle10.1016/S0148-9062(98)00179-X
H. H. Einstein (1993) Modern developments in discontinuity analysis, the persistence-connectivity problem Comprehensive rock engineering Pergamon Press Oxford 193–213
H. H. Einstein D. Veneziano G. Baecher K. O’Reilly (1983) ArticleTitleThe effect of discontinuity persistence on rock slope stability Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 20 IssueID5 227–236 Occurrence Handle10.1016/0148-9062(83)90003-7
Hoek, E., Carranza-Torres, C., Corkum, B. (2002): Hoek-Brown failure criterion – 2002 edition. In: Proc., 5th North American Rock Mech. Symposium, Toronto, Canada, 267–273.
E. Hoek P. K. Kaiser W. F. Bawden (1995) Support of underground excavations in hard rock A. A. Balkema Rotterdam 215
Itasca (2004a): 3DEC. Itasca Consulting Group Inc., Version 3.0.
Itasca (2004b): UDEC-Universal Distinct Element Code. Itasca Consulting Group Inc., Version 4.0.
J. M. Kemeny (2003) ArticleTitleThe time-dependent reduction of sliding cohesion due to rock bridges along discontinuities: A fracture mechanics approach Rock Mech. Rock Engng. 36 IssueID1 27–38 Occurrence Handle10.1007/s00603-002-0032-2
J. M. Kemeny (2005) ArticleTitleTime-dependent drift degradation due to the progressive failure of rock bridges along discontinuities Int. J. Rock Mech. Min. Sci. 42 IssueID1 35–46 Occurrence Handle10.1016/j.ijrmms.2004.07.001
J. M. Kemeny N. G. W. Cook (1986) ArticleTitleEffective moduli, non-linear deformation and strength of cracked elastic solid Int. J. Rock Mech. Min. Sci. Geomech. Abstr. 23 IssueID2 107–118 Occurrence Handle10.1016/0148-9062(86)90337-2
Kim, B. H. (2002): Revaluation of rock mass classification using multivariate analysis and estimation of the support on tunnel. Ph. D. Thesis, Chonnam National University, South Korea.
M.A. Mahtab P. Grasso (1992) Geomechanics principles in the design of tunnels and caverns in rock Elsevier Amsterdam 250
W. Mendenhall T. Sincich (1995) Statistics for engineering and sciences Prentice-Hall, Englewood Cliffs New Jersey
S. L. Nichol O. Hungr S.G. Evans (2002) ArticleTitleLarge-scale brittle and ductile toppling of rock slopes Can. Geotech. J. 39 773–788 Occurrence Handle10.1139/t02-027
Palisade Corporation (2001): @RISK. Palisade Corporation.
Reyes, O., Einstein, H. (1991): Failure mechanisms of fractured rock – A fracture coalescence model. In: Proc., 7th ISRM, 333–339.
B. Shen O. Stephansson H. Einstein B. Ghahreman (1995) ArticleTitleCoalescence of fracture under shear stresses in experiments J. Geophys. Res. 100 IssueIDB4 5975–5990 Occurrence Handle10.1029/95JB00040
Sjöberg, J. (1996). Large scale slope stability in open pit mining – a review. Technical Report, Lulea University of Technology, Division of Rock Mechanics, Lulea, Sweden, 229.
J. J. Song C. I. Lee (2001) ArticleTitleEstimation of joint length distribution using window sampling Int. J. Rock Mech. Min. Sci. 38 519–528 Occurrence Handle10.1016/S1365-1609(01)00018-1
J. J. Song C. I. Lee M. Seto (2001) ArticleTitleStability analysis of rock blocks around a tunnel using a statistical joint modeling technique Tunnell. Underground Space Technol. 16 341–351 Occurrence Handle10.1016/S0886-7798(01)00063-3
SPSS Inc. (2004): SPSS 12.0KOR for Windows.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kim, B., Cai, M., Kaiser, P. et al. Estimation of Block Sizes for Rock Masses with Non-persistent Joints. Rock Mech. Rock Engng. 40, 169–192 (2007). https://doi.org/10.1007/s00603-006-0093-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00603-006-0093-8