Abstract
This paper presents a detailed literature review on the current research of incremental sheet forming relating to deformation mechanism, modelling techniques, forming force prediction and process investigations. First, a review of the fundamental deformation mechanism and formability in incremental sheet forming (ISF) is provided. Subsequently, the modelling techniques for ISF are reviewed and categorised into two approaches: analytical modelling and finite element modelling. Special interest is given to a critical review regarding the forming forces analysis and prediction during the process. Then, previous publications related to geometric accuracy, surface finish and forming efficiency in ISF are reviewed. Finally, several potential hybrid incremental sheet-forming strategies are discussed. This leads to a statement of conclusion which may act as an inspiration and reference for the researcher.
Similar content being viewed by others
References
Jeswiet J, Micari F, Hirt G, Bramley A, Duflou J, Allwood J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Ann Manuf Technol 54(2):623–649
Echrif SBM, Hrairi M (2011) Research and progress in incremental sheet forming processes. Mater Manuf Process 26(11):1404–1414
Leszak E (1967) Apparatus and process for incremental dieless forming. USA Patent 3342051A
Kitazawa K, WAKABAYASHI A, MURATA K, YAEJIMA K (1996) Metal-flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminum sheets, vol 46. vol 2. Keikinzoku Tokyo, JAPAN
Jeswiet J (2001) Incremental single point forming. Transaction of the North American Manufacturing Research INstitution of SME 29:75–79
Filice L, Fratini L, Micari F (2002) Analysis of material formability in incremental forming. CIRP Ann Manuf Technol 51(1):199–202
Smith J, Malhotra R, Liu WK, Cao J (2013) Deformation mechanics in single-point and accumulative double-sided incremental forming. Int J Adv Manuf Technol 69(5–8):1185–1201
Amino M, Mizoguchi M, Terauchi Y, Maki T (2014) Current status of “dieless” Amino’s incremental forming. Procedia Engineering 81:54–62
Ceretti E, Giardini C, Attanasio A (2004) Experimental and simulative results in sheet incremental forming on CNC machines. J Mater Process Technol 152(2):176–184
Ambrogio G, De Napoli L, Filice L, Gagliardi F, Muzzupappa M (2005) Application of incremental forming process for high customised medical product manufacturing. J Mater Process Technol 162–163:156–162
Nallagundla V, Lingam R, Cao J (2014) Incremental sheet metal forming processes. In: Nee AYC (ed) Handbook of manufacturing engineering and technology. Springer London, pp 411–452. doi:10.1007/978-1-4471-4670-4_45
Dittrich MA, Gutowski TG, Cao J, Roth JT, **a ZC, Kiridena V, Ren F, Henning H (2012) Exergy analysis of incremental sheet forming. Prod Eng 6(2):169–177
Adams DW (2014) Improvements on single point incremental forming through electrically assisted forming, contact area prediction and tool development. ProQuest, UMI Dissertations Publishing
Liu Z, Li Y, Meehan P (2013) Experimental investigation of mechanical properties, formability and force measurement for AA7075-O aluminum alloy sheets formed by incremental forming. Int J Precis Eng Manuf 14(11):1891–1899
Vihtonen L, Puzik A, Katajarinne T (2008) Comparing two robot assisted incremental forming methods: incremental forming by pressing and incremental hammering. Int J Mater Form 1(1):1207–1210
Malhotra R, Cao J, Ren F, Kiridena V, Cedric **a Z, Reddy NV (2011) Improvement of geometric accuracy in incremental forming by using a squeezing toolpath strategy with two forming tools. J Manuf Sci Eng 133(6):61019
Allwood J, Houghton N, Jackson K (2005) The design of an incremental sheet forming machine. Adv Mater Res 6:471–478
Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H (2008) Improved SPIF performance through dynamic local heating. Int J Mach Tools Manuf 48(5):543–549
Li Y, Daniel WJT, Liu Z, Lu H, Meehan PA (2015) Deformation mechanics and efficient force prediction in single point incremental forming. J Mater Process Technol 221:100–111
Kim TJ, Yang DY (2000) Improvement of formability for the incremental sheet metal forming process. Int J Mech Sci 42(7):1271–1286
Jeswiet J, Young D (2005) Forming limit diagrams for single-point incremental forming of aluminium sheet. Proc Inst Mech Eng B J Eng Manuf 219(4):359–364
Silva MB, Skjoedt M, Martins PAF, Bay N (2008) Revisiting the fundamentals of single point incremental forming by means of membrane analysis. Int J Mach Tools Manuf 48(1):73–83
Martins PAF, Bay N, Skjoedt M, Silva MB (2008) Theory of single point incremental forming. CIRP Ann Manuf Technol 57(1):247–252
Jackson K, Allwood J (2009) The mechanics of incremental sheet forming. J Mater Process Technol 209(3):1158–1174
Silva MB, Nielsen PS, Bay N, Martins PAF (2011) Failure mechanisms in single-point incremental forming of metals. Int J Adv Manuf Technol 56(9):893–903
Silva MB, Skjoedt M, Atkins AG, Bay N, Martins PAF (2008) Single-point incremental forming and formability-failure diagrams. J Strain Anal Eng Des 43(1):15–35
Allwood J, Shouler D, Tekkaya AE (2007) The increased forming limits of incremental sheet forming processes. Key Eng Mater 344:621–628
Mirnia MJ, Dariani BM (2012) Analysis of incremental sheet metal forming using the upper-bound approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Malhotra R, Xue L, Belytschko T, Cao J (2012) Mechanics of fracture in single point incremental forming. J Mater Process Technol 212(7):1573–1590
Xue L (2007) Damage accumulation and fracture initiation in uncracked ductile solids subject to triaxial loading. Int J Solids Struct 44(16):5163–5181
Lu B, Fang Y, Xu DK, Chen J, Ou H, Moser NH, Cao J (2014) Mechanism investigation of friction-related effects in single point incremental forming using a developed oblique roller-ball tool. Int J Mach Tools Manuf 85:14–29
Xu D, Wu W, Malhotra R, Chen J, Lu B, Cao J (2013) Mechanism investigation for the influence of tool rotation and laser surface texturing (LST) on formability in single point incremental forming. Int J Mach Tools Manuf 73:37–46
Eyckens P, Belkassem B, Henrard C, Gu J, Sol H, Habraken AM, Duflou JR, Van Bael A, Van Houtte P (2011) Strain evolution in the single point incremental forming process: digital image correlation measurement and finite element prediction. Int J Mater Form 4(1):55–71
Smith J, Malhotra R, Liu WK, Cao J (2013) Deformation mechanics in single-point and accumulative double-sided incremental forming. The International Journal of Advanced Manufacturing Technology:1–17
Emmens WC, Boogaard AH (2008) Tensile tests with bending: a mechanism for incremental forming. Int J Mater Form 1(1):1155–1158
Emmens WC, van den Boogaard AH (2009) An overview of stabilizing deformation mechanisms in incremental sheet forming. J Mater Process Technol 209(8):3688–3695
Fang Y, Lu B, Chen J, Xu DK, Ou H (2014) Analytical and experimental investigations on deformation mechanism and fracture behavior in single point incremental forming. J Mater Process Technol 214(8):1503–1515
Li Y, Daniel WJT, Meehan PA (2017) Deformation analysis in single-point incremental forming through finite element simulation. Int J Adv Manuf Technol 88(1–4):255–267
Iseki H, Kato, K., Sakamoto, S., (1993) Forming limit of flexible and incremental sheet metal bulging with a spherical roller. Proceedings of 4th ICTP, Bei**g, China:1635–1640
Shim M-S, Park J-J (2001) The formability of aluminum sheet in incremental forming. J Mater Process Technol 113(1):654–658
Kim YH, Park JJ (2002) Effect of process parameters on formability in incremental forming of sheet metal. J Mater Process Technol 130–131:42–46
Park J-J, Kim Y-H (2003) Fundamental studies on the incremental sheet metal forming technique. J Mater Process Technol 140(1–3):447–453
Allwood JM, Shouler DR (2009) Generalised forming limit diagrams showing increased forming limits with non-planar stress states. Int J Plast 25(7):1207–1230
Ham M, Jeswiet J (2006) Single point incremental forming and the forming criteria for AA3003. CIRP Ann Manuf Technol 55(1):241–244
Minutolo FC, Durante M, Formisano A, Langella A (2007) Evaluation of the maximum slope angle of simple geometries carried out by incremental forming process. J Mater Process Technol 194(1–3):145–150
Bhattacharya A, Maneesh K, Venkata Reddy N, Cao J (2011) Formability and surface finish studies in single point incremental forming. J Manuf Sci Eng 133(6):61020
Hussain G, Gao L (2007) A novel method to test the thinning limits of sheet metals in negative incremental forming. Int J Mach Tools Manuf 47(3–4):419–435
Fratini L, Ambrogio G, Di Lorenzo R, Filice L, Micari F (2004) Influence of mechanical properties of the sheet material on formability in single point incremental forming. CIRP Ann Manuf Technol 53(1):207–210
Hussain G, Gao L, Hayat N, Ziran X (2009) A new formability indicator in single point incremental forming. J Mater Process Technol 209(9):4237–4242
Li Y, Liu Z, Lu H, Daniel WJT, Meehan PA (2014) Experimental study and efficient prediction on forming forces in incremental sheet forming. Adv Mater Res 939:313–321
Fiorentino A, Ceretti E, Attanasio A, Mazzoni L, Giardini C (2009) Analysis of forces, accuracy and formability in positive die sheet incremental forming. Int J Mater Form 2(1):805–808
Fiorentino A, Attanasio A, Marzi R, Ceretti E, Giardini C (2011) On forces, formability and geometrical error in metal incremental sheet forming. Int J Mater Prod Technol 40(3–4):277–295
Ambrogio G, Filice L, Gagliardi F (2012) Formability of lightweight alloys by hot incremental sheet forming. Mater Des 34:501–508
Li Y, Liu Z, Lu H, Daniel WJT, Liu S, Meehan P (2014) Efficient force prediction for incremental sheet forming and experimental validation. Int J Adv Manuf Technol 73(1–4):571–587
Jeswiet J, Micari F, Hirt G, Bramley A, Duflou J, Allwood J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Ann Manuf Technol 54(2):88–114
Petek A, Kuzman K, Kopač J (2009) Deformations and forces analysis of single point incremental sheet metal forming. Archives of Materials Science and Engineering 35(2):107–116
Hussain G, Gao L, Hayat N, Cui Z, Pang YC, Dar NU (2008) Tool and lubrication for negative incremental forming of a commercially pure titanium sheet. J Mater Process Technol 203(1–3):193–201
Al-Ghamdi KA, Hussain G (2016) On the comparison of formability of roll-bonded steel-Cu composite sheet metal in incremental forming and stam** processes. Int J Adv Manuf Technol 87(1):267–278
Avitzur B, Yang CT (1960) Analysis of power spinning of cones. Journal of Engineering for Industry 82(3):231
Bambach M (2010) A geometrical model of the kinematics of incremental sheet forming for the prediction of membrane strains and sheet thickness. J Mater Process Technol 210(12):1562–1573
Iseki H (2001) An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller. J Mater Process Technol 111:150–154
Young D, Jeswiet J (2004) Wall thickness variations in single-point incremental forming. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (11):1453–1459
Raithatha A, Duncan S, Jackson K, Allwood J Second order cone programming in modeling incremental deformation. In, 2007. IEEE, pp 4841–4846
Raithatha A, Duncan S (2009) Rigid plastic model of incremental sheet deformation using second-order cone programming. Int J Numer Methods Eng 78(8):955–979
Li Y, Liu Z, Daniel WJT, Meehan PA (2014) Simulation and experimental observations of effect of different contact interfaces on the incremental sheet forming process. Mater Manuf Process 29(2):121–128
Henrard C, Bouffioux C, Eyckens P, Sol H, Duflou JR, Van Houtte P, Van Bael A, Duchêne L, Habraken AM (2011) Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Comput Mech 47(5):573–590
Henrard C (2009) Numerical simulations of the single point incremental forming process
Flores P, Duchêne L, Bouffioux C, Lelotte T, Henrard C, Pernin N, Van Bael A, He S, Duflou J, Habraken AM (2007) Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. Int J Plast 23(3):420–449
Eyckens P (2010) Formability in incremental sheet forming: generalization of the Marciniak-Kuczynski model. PhD.Thesis, Katholieke Universiteit Leuven
Lasunon O, Knight WA (2007) Comparative investigation of single-point and double-point incremental sheet metal forming processes. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (12):1725–1732
Yamashita M, Gotoh M, Atsumi S-Y (2008) Numerical simulation of incremental forming of sheet metal. J Mater Process Technol 199(1–3):163–172
Ma LW, Mo JH (2008) Three-dimensional finite element method simulation of sheet metal single-point incremental forming and the deformation pattern analysis. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture 222 (3):373–380
Dejardin S, Thibaud S, Gelin JC, Michel G (2010) Experimental investigations and numerical analysis for improving knowledge of incremental sheet forming process for sheet metal parts. J Mater Process Technol 210(2):363–369
Ambrogio G, Filice L, Fratini L, Micari F Process mechanics analysis in single point incremental forming. In: Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes, Columbus, Ohio (USA), 2004. pp 922–927
Kim T-J, Yang D-Y (2007) FE-analysis of sheet metal forming processes using continuous contact treatment. Int J Plast 23(3):544–560
Henrard C, Bouffioux C, Godinas A, Habraken A Development of a contact model adapted to incremental forming. In, 2005. The publishing House of the Romanian Academy
Moser N, Pritchet D, Ren H, Ehmann KF, Cao J (2016) An efficient and general finite element model for double-sided incremental forming. Journal of Manufacturing Science and Engineering, Transactions of the ASME 138 (9)
Robert C, Dal Santo P, Delamézière A, Potiron A, Batoz JL (2008) On some computational aspects for incremental sheet metal forming simulations. Int J Mater Form 1(1):1195–1198
Robert C, Delamézière A, Dal Santo P, Batoz JL (2012) Comparison between incremental deformation theory and flow rule to simulate sheet-metal forming processes. J Mater Process Technol 212(5):1123–1131
Sena JIV, Lequesne C, Duchene L, Habraken AM, Valente RAF, De Sousa RJA (2016) Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Eng Comput 33(5):1388–1421
Bambach M (2016) Fast simulation of incremental sheet metal forming by adaptive remeshing and subcycling. Int J Mater Form 9(3):353–360
Minutolo FC, Durante M, Formisano A, Langella A Forces analysis in sheet incremental forming and comparison of experimental and simulation results. In: Intelligent production machines and systems-2nd IPROMS virtual internationl conference, 2006. pp 229–234
Szekeres AJ (2004) Three axis force measurement for computer numerical control single point incremental forming. MQ92357, Queen’s University at Kingston (Canada), Canada
Szekeres A, Ham M, Jeswiet J (2007) Force measurement in pyramid shaped parts with a spindle mounted force sensor. Key Eng Mater 344:551–558
Jeswiet J, D JR, Szekeres A (2005) Forces in single point and two point incremental forming. Adv Mater Res 6-8:449–456
Duflou JR (2005) Force measurements for single point incremental forming: an experimental study. Adv Mater Res 6-8:441–448
Duflou J, Tunçkol Y, Szekeres A, Vanherck P (2007) Experimental study on force measurements for single point incremental forming. J Mater Process Technol 189(1):65–72
Petek A, Kuzman K, Suhač B (2009) Autonomous on-line system for fracture identification at incremental sheet forming. CIRP Ann Manuf Technol 58(1):283–286
Filice L, Ambrogio G, Micari F (2006) On-line control of single point incremental forming operations through punch force monitoring. CIRP Ann Manuf Technol 55(1):245–248
Ambrogio G, Filice L, Micari F (2006) A force measuring based strategy for failure prevention in incremental forming. J Mater Process Technol 177(1–3):413–416
Bouffioux C, Eyckens P, Henrard C, Aerens R, Van Bael A, Sol H, Duflou JR, Habraken AM (2008) Identification of material parameters to predict single point incremental forming forces. Int J Mater Form 1(1):1147–1150
Cerro I, Maidagan E, Arana J, Rivero A, Rodríguez PP (2006) Theoretical and experimental analysis of the dieless incremental sheet forming process. J Mater Process Technol 177(1–3):404–408
Aerens R, Eyckens P, Van Bael A, Duflou JR (2010) Force prediction for single point incremental forming deduced from experimental and FEM observations. Int J Adv Manuf Technol 46(9):969–982
Allwood JM, King GPF, Duflou J (2005) A structured search for applications of the incremental sheet-forming process by product segmentation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 219 (2):239–244
Allwood JM, Braun D, Music O (2010) The effect of partially cut-out blanks on geometric accuracy in incremental sheet forming. J Mater Process Technol 210(11):1501–1510
Micari F, Ambrogio G, Filice L (2007) Shape and dimensional accuracy in single point incremental forming: state of the art and future trends. J Mater Process Technol 191(1–3):390–395
Essa K, Hartley P (2011) An assessment of various process strategies for improving precision in single point incremental forming. Int J Mater Form 4(4):401–412
Guzmán CF, Gu J, Duflou J, Vanhove H, Flores P, Habraken AM (2012) Study of the geometrical inaccuracy on a SPIF two-slope pyramid by finite element simulations. Int J Solids Struct 49(25):3594–3604
Ambrogio G, Cozza V, Filice L, Micari F (2007) An analytical model for improving precision in single point incremental forming. J Mater Process Technol 191(1–3):92–95
Ham MEJ (2007) Single point incremental forming of aluminum sheet metal: The development of maximum forming angle forming limits, measured strains, surface roughness and dimensional accuracy. Ph.D., Queen’s University (Canada), Ann Arbor
Li Y, Lu H, Daniel WJT, Meehan PA (2015) Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology. Int J Adv Manuf Technol 79(9–12):2041–2055
Matsubara S (1994) Incremental backward bulge forming of a sheet metal with a hemispherical head tool. Journal of the JSTP 35(406):1311–1316
Meier H, Magnus C, Smukala V (2011) Impact of superimposed pressure on dieless incremental sheet metal forming with two moving tools. CIRP Ann Manuf Technol 60(1):327–330
Hirt G, Ames J, Bambach M, Kopp R (2004) Forming strategies and process modelling for CNC incremental sheet forming. CIRP Ann Manuf Technol 53(1):203–206
Attanasio A, Ceretti E, Giardini C, Mazzoni L (2008) Asymmetric two points incremental forming: improving surface quality and geometric accuracy by tool path optimization. J Mater Process Technol 197(1–3):59–67
Lu H, Kearney M, Li Y, Liu S, Daniel WJT, Meehan PA (2016) Model predictive control of incremental sheet forming for geometric accuracy improvement. Int J Adv Manuf Technol 82(9–12):1781–1794
Lu H, Kearney M, Liu S, Daniel WJT, Meehan PA (2016) Two-directional toolpath correction in single-point incremental forming using model predictive control. International Journal of Advanced Manufacturing Technology:1–16
Malhotra R, Reddy NV, Cao J (2010) Automatic 3D spiral toolpath generation for single point incremental forming. J Manuf Sci Eng 132(6):061003–061003
Ambrogio G, Gagliardi F, Filice L (2013) Robust design of incremental sheet forming by Taguchi’s method. Procedia CIRP 12:270–275
Wang H, Duncan S Optimization of tool trajectory for incremental sheet forming using closed loop control. In: Automation Science and Engineering (CASE), 2011 I.E. Conference on, 24–27 Aug. 2011 2011. pp 779–784. doi:10.1109/case.2011.6042410
Bambach M, Taleb Araghi B, Hirt G (2009) Strategies to improve the geometric accuracy in asymmetric single point incremental forming. Prod Eng 3(2):145–156
Sarraji WKH, Hussain J, Ren W-X (2011) Experimental investigations on forming time in negative incremental sheet metal forming process. Mater Manuf Process 27(5):499–506
Ambrogio G, Filice L, Gagliardi F (2012) Improving industrial suitability of incremental sheet forming process. Int J Adv Manuf Technol 58(9–12):941–947
Duflou JR, Sutherland JW, Dornfeld D, Herrmann C, Jeswiet J, Kara S, Hauschild M, Kellens K (2012) Towards energy and resource efficient manufacturing: a processes and systems approach. CIRP Ann Manuf Technol 61(2):587–609
Branker K, Adams D, Jeswiet J (2012) Initial analysis of cost, energy and carbon dioxide emissions in single point incremental forming - producing an aluminium hat. Int J Sustain Eng 5(3):188
Branker K, Adams D, Szekeres A, Jeswiet J (2013) Investigation of energy, carbon dioxide emissions and costs in single point incremental forming. In: Nee AYC, Song B, Ong S-K (eds) Re-engineering manufacturing for sustainability. Springer Singapore, pp 291–295. doi:10.1007/978-981-4451-48-2_48
Ingarao G, Ambrogio G, Gagliardi F, Di Lorenzo R (2012) A sustainability point of view on sheet metal forming operations: material wasting and energy consumption in incremental forming and stam** processes. J Clean Prod 29–30(0):255–268
Ingarao G, Vanhove H, Kellens K, Duflou JR (2014) A comprehensive analysis of electric energy consumption of single point incremental forming processes. J Clean Prod 67(0):173–186
Ambrogio G, Ingarao G, Gagliardia F, Di Lorenzo R (2014) Analysis of energy efficiency of different setups able to perform single point incremental forming (SPIF) processes. Procedia CIRP 15(0):111–116
Bagudanch I, Garcia-Romeu ML, Ferrer I, Lupiañez J (2013) The effect of process parameters on the energy consumption in single point incremental forming. Procedia Engineering 63(0):346–353
Hagan E, Jeswiet J (2004) Analysis of surface roughness for parts formed by computer numerical controlled incremental forming. Proc Inst Mech Eng, B J Eng Manuf 218 (10):1307–1312
Powers BM, Ham M, Wilkinson MG (2010) Small data set analysis in surface metrology: an investigation using a single point incremental forming case study. Scanning 32(4):199–211
Lasunon OU (2013) Surface roughness in incremental sheet metal forming of AA5052. Adv Mater Res 753-755:203–206
Durante M, Formisano A, Langella A (2010) Comparison between analytical and experimental roughness values of components created by incremental forming. J Mater Process Technol 210(14):1934–1941
Hamilton KAS (2010) Friction and external surface roughness in single point incremental forming: a study of surface friction, contact area and the ‘orange peel’ effect
Duflou JR, Callebaut B, Verbert J, De Baerdemaeker H (2007) Laser assisted incremental forming: formability and accuracy improvement. CIRP Ann Manuf Technol 56(1):273–276
Mohammadi A, Vanhove H, Van Bael A, Duflou JR (2016) Towards accuracy improvement in single point incremental forming of shallow parts formed under laser assisted conditions. Int J Mater Form 9(3):339–351
Meier H SV, Dewald O, Zhang J(2007) Two point incremental forming with two moving forming tools. In: SheMet ‘07 Proceedings of the 12th International Conference on Sheet Metal, Palermo, Sicily, Italy. pp 599–605
Sajn V, Jurisevic B, Kosel F (2011) Water jet incremental sheet metal forming: pressure distribution analysis. Int J Interact Des Manuf 5(2):95–102
Iseki H (2001) Flexible and incremental bulging of sheet metal using high-speed water jet. JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing 44 (2):486–493
Jurisevic B, Kuzman K, Junkar M (2006) Water jetting technology: an alternative in incremental sheet metal forming. Int J Adv Manuf Technol 31(1):18–23
Li J, He K, Wei S, Dang X, Du R (2014) Modeling and experimental validation for truncated cone parts forming based on water jet incremental sheet metal forming. Int J Adv Manuf Technol 75(9):1691–1699
Teymoori F, LohMousavi M, Etesam A (2016) Numerical analysis of fluid structure interaction in water jet incremental sheet forming process using coupled Eulerian–Lagrangian approach. Int J Interact Des Manuf 10(2):203–210
Fan G, Gao L, Hussain G, Wu Z (2008) Electric hot incremental forming: a novel technique. Int J Mach Tools Manuf 48(15):1688–1692
Xu D, Lu B, Cao T, Chen J, Long H, Cao J (2014) A comparative study on process potentials for frictional stir- and electric hot-assisted incremental sheet forming. Procedia Engineering 81(0):2324–2329
Liu R, Lu B, Xu D, Chen J, Chen F, Ou H, Long H (2016) Development of novel tools for electricity-assisted incremental sheet forming of titanium alloy. Int J Adv Manuf Technol 85(5):1137–1144
Honarpisheh M, Abdolhoseini MJ, Amini S (2015) Experimental and numerical investigation of the hot incremental forming of Ti-6Al-4V sheet using electrical current. International Journal of Advanced Manufacturing Technology
Magnus CS (2016) Joule heating of the forming zone in incremental sheet metal forming: part 2. The International Journal of Advanced Manufacturing Technology:1–15
Cui XH, Mo JH, Li JJ, Zhao J, Zhu Y, Huang L, Li ZW, Zhong K (2014) Electromagnetic incremental forming (EMIF): a novel aluminum alloy sheet and tube forming technology. J Mater Process Technol 214(2):409–427
Cui X, Mo J, Li J, **ao X, Zhou B, Fang J (2016) Large-scale sheet deformation process by electromagnetic incremental forming combined with stretch forming. J Mater Process Technol 237:139–154
Vahdati M, Mahdavinejad R, Amini S (2015) Investigation of the ultrasonic vibration effect in incremental sheet metal forming process. Proc Inst Mech Eng B J Eng Manuf
Amini S, Hosseinpour Gollo A, Paktinat H (2016) An investigation of conventional and ultrasonic-assisted incremental forming of annealed AA1050 sheet. Int J Adv Manuf Technol r1–10
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, Y., Chen, X., Liu, Z. et al. A review on the recent development of incremental sheet-forming process. Int J Adv Manuf Technol 92, 2439–2462 (2017). https://doi.org/10.1007/s00170-017-0251-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0251-z