Abstract
Incremental sheet forming (ISF) satisfies the increasing demand for the production of small batch products or customized parts. Up to now, however, there are little studies or applications on the ISF process of geometrically complex products as a result of the long processing time and the difficulty in generating an appropriate tool path. In this study, an attempt was made to process a car taillight bracket which had several intricate geometrical characteristics, especially the nearly straight-wall region and the groove region. It was firstly verified that cracks and wrinkles are prone to be brought about in the two crucial regions of the target product if a traditional multipass forming was employed. Thus, a multipass strategy, based on a detailed area division which considered the processing depth, was approached. And this strategy required only one transitional model so as to shorten the manufacturing cycle. In this way, associated with each region was a corresponding tool path which can be easily modified. Based on the proposed multipass design, the taillight bracket was successfully processed without evident forming defects. And the thickness thinning rate approximately met the conventional requirement of less than 25 %. Then, as the transitional model plays an important role in the forming performance of the final product, the design of the addendum surface of the aforementioned two critical areas was discussed. It was verified that a regular transitional surface which is geometrically nearer to the final shape is able to obtain a satisfying forming quality.
Similar content being viewed by others
References
Jackson K, Allwood J (2009) The mechanics of incremental sheet forming. J Mater Process Technol 209(3):1158–1174
Jeswiet J, Micari F, Hirt G, Bramley A, Duflou J, Allwood J (2005) Asymmetric single point incremental forming of sheet metal. CIRP Ann Manuf Technol 54(2):623–649
Filice L, Fratini L, Micari F (2002) Analysis of material formability in incremental forming. CIRP Ann Manuf Technol 51(1):199–202
Jackson KR, Allwood JM, Landert M (2008) Incremental forming of sandwich panels. J Mater Process Technol 204(1–3):290–303
Ziran X, Gao L, Hussain G, Cui Z (2010) The performance of flat end and hemispherical end tools in single-point incremental forming. Int J Adv Manuf Technol 46(9):1113–1118
Ambrogio G, De Napoli L, Filice L, Gagliardi F, Muzzupappa M (2005) Application of incremental forming process for high customised medical product manufacturing. J Mater Process Technol 162–163:156–162
Yang DY, Kim TJ (2000) Improvement of formability for the incremental sheet metal forming process. Int J Mech Sci 42(7):1271–1286
Hirt G, Ames J, Bambach M, Kopp R (2004) Forming strategies and process modelling for CNC incremental sheet forming. CIRP Ann Manuf Technol 53(1):203–206
Bambach M, Taleb Araghi B, Hirt G (2009) Strategies to improve the geometric accuracy in asymmetric single point incremental forming. Prod Eng Res Dev 3(2):145–156
Silva MB, Nielsen PS, Bay N, Martins PAF (2011) Failure mechanisms in single-point incremental forming of metals. Int J Adv Manuf Technol 56(9–12):893–903
Iseki H, Naganawa T (2002) Vertical wall surface forming of rectangular shell using multistage incremental forming with spherical and cylindrical rollers. J Mater Process Technol 130:675–679
Hirt G, Junk S, Witulski N (2002) Incremental sheet forming: quality evaluation and process simulation. Proceeding of the 7th ICTP Conference: 925–930
Kitazawa K, Wakabayashi A, Murata K, Yaejima K (1996) Metal flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminum sheets. Jpn Inst Light Met 46(2):65–70
Hirt G, Ames J, Bambach M (2005) A new forming strategy to realise parts designed for deep-drawing by incremental CNC sheet forming. Steel Res Int 76(2–3):160–166
Skjødt M, Bay N, Endelt B, Ingarao G (2008) Multi stage strategies for single point incremental forming of a cup. Int J Mater Form suppl 1:1199–1202
Zhu H, Liu Z, Fu J (2011) Spiral tool-path generation with constant scallop height for sheet metal CNC incremental forming. Int J Adv Manuf Technol 54(9–12):911–919
Jeswiet J, Young D (2004) Wall thickness variations in single-point incremental forming. Proc IME Eng B J Eng 218(11):1453–1459
Kim Y, Park J (2002) Effect of process parameters on formability in incremental forming of sheet metal. J Mater Process Technol 130:42–46
Li J, Hu J, Pan J, Geng P (2012) Thickness distribution and design of a multi-stage process for sheet metal incremental forming. Int J Adv Manuf Technol 62(9–12):981–988
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Junchao, L., Junjian, S. & Bin, W. A multipass incremental sheet forming strategy of a car taillight bracket. Int J Adv Manuf Technol 69, 2229–2236 (2013). https://doi.org/10.1007/s00170-013-5179-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-013-5179-3