SpringerLink
Log in

Environmental and economical sustainability of WEEE closed-loop supply chains with recycling: a system dynamics analysis

  • SPECIAL ISSUE - ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Nowadays, the worldwide production of electrical and electronic equipment (EEE) is consequently increasing, reducing both resources and landfills. In this manuscript, we investigate the significance of the factors that comprise the environmental sustainability strategies (environmental legislation and green image) and the operational features of the closed-loop supply chain (CLSC) (chain's features, products' features and economic parameters), their interactions and the type of their impact on the environmental (availability of natural resources and landfill availability) and economical sustainability of a WEEE CLSC. We use an extension of a System Dynamics-based model of a CLSC with recycling activities introduced by Georgiadis and Besiou [J Clean Prod 16(15):1665–1678, 2008]. The developed model is validated using data from a real-world CLSC of EEE in Greece. Extended numerical investigation provides insights to the managers of the WEEE CLSC and the legislators with regard to the actions which can lead to sustainability.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price includes VAT (Canada)

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Cui J, Forssberg E (2007) Characterization of shredded television scrap and implications for materials recovery. Waste Manag 27:415–424

    Article  Google Scholar 

  2. Hischier R, Wager P, Gauglhofer J (2005) Does WEEE recycling make sense from an environmental perspective? The environmental impacts of the Swiss take-back and recycling systems for waste electrical and electronic equipment (WEEE). Environ Impact Asses Rev 25:525–539

    Article  Google Scholar 

  3. Qian X, Zhang HC (2003) An environmental conscious management model for end-of-life electromechanical products. Proceedings of the IEEE International Symposium on Electronics and the Environment, Boston, Massachusetts, pp 347–381, 19–22 May 2003

  4. Neto QF, Walther G, Bloemhof J, van Nunen JAEE, Spengler T (2007) From closed-loop to sustainable supply chains: the WEEE case. Erasmus University Working Paper. Available via http://repub.eur.nl/publications/index/781685813/

  5. de Koster RBM, Flapper SDP, Krikke HR, Vermeulen WS (2005) Recovering end-of-life large white goods: the Dutch initiative. In: Flapper SDP, van Nunen JAEE, van Wassenhove LN (eds) Managing closed-loop supply chains. Springer, Berlin, pp 169–181

    Chapter  Google Scholar 

  6. Ylä-Mella J, Pongrácz E, Keiski RL (2004) Recovery of waste electrical and electronic equipment (WEEE) in Finland. Proceedings of the Waste Minimization and Resource use Optimization Conference, Oulu, Finland, 10 June 2004, pp 83–92

  7. EEA (European Environmental Agency) (2003) Waste from electrical and electronic equipment (WEEE)—quantities, dangerous substances and treatment methods. European Topic Centre on Waste, EEA, Copenhagen

  8. Toffel MW (2003) The growing strategic importance of end-of-life product management. Calif Manage Rev 45(3):102–129

    Google Scholar 

  9. Cui J, Forssberg E (2003) Mechanical recycling of waste electric and electronic equipment: a review. J Hazard Mater 99(3):243–263

    Article  Google Scholar 

  10. European Union (2003) Directive 2002/96/EC of the European Parliament and of the Council of 27 January 2003 on WEEE. European Union, Brussels, 13 Feb 2003

  11. The Economist (2005) Electronics, unleaded. 12 March 2005

  12. Fleischmann M, Bloemhof-Ruwaard JM, Dekker R, van der Laan E, van Nunen JAEE, van Wassenhove LN (1997) Quantitative models for reverse logistics: a review. Eur J Oper Res 103(1):1–17

    Article  MATH  Google Scholar 

  13. Prahinski C, Kocabasoglu C (2006) Empirical research opportunities in reverse supply chains. Omega 34(6):519–532

    Article  Google Scholar 

  14. Spengler T, Piichert H, Penkuhn T, Rentz O (1997) Environmental integrated production and recycling management. Eur J Oper Res 97(2):308–326

    Article  MATH  Google Scholar 

  15. Georgiadis P, Tagaras G, Vlachos D (2004) Long-term analysis of closed-loop supply chains. In: Dekker R, Fleischmann M, Inderfurth K, van Wassenhove LN (eds) Reverse logistics: quantitative models for closed-loop supply chains. Springer Verlag, Berlin, pp 313–331

    Google Scholar 

  16. Van Schaik A, Reuter MA (2004) The time-varying factors influencing the recycling rate of products. Resour Conserv Recycl 40(4):301–328

    Article  Google Scholar 

  17. Spengler T, Schroter M (2003) Strategic management of spare parts in closed-loop supply chains-a system dynamics approach. Interfaces 33(6):7–17

    Article  Google Scholar 

  18. Georgiadis P, Besiou M (2008) Sustainability in electrical and electronic equipment closed-loop supply chains: a system dynamics approach. J Clean Prod 16(15):1665–1678

    Article  Google Scholar 

  19. Georgiadis P, Besiou M (2008) The importance of feedback loops designing environmental policies for sustainable development. Proceedings of the 26th International Conference of System Dynamics Society, Athens, Greece, 20–24 July 2008

  20. Stevels A (1999) Eco-efficiency of take-back systems of electronic products. Proceedings of the IEEE International Symposium on Electronics and the Environment, Danvers, Massachusetts, pp 286–291, 11–13 May 1999

  21. Lambert AJD, Stoop M (2001) Processing of discarded household refrigerators: lessons from the Dutch example. J Clean Prod 9(3):243–252

    Article  Google Scholar 

  22. Stoop M, Lambert AJD (1998) Processing of discarded refrigerators in the Netherlands. Technovation 18(2):101–110

    Article  Google Scholar 

  23. Nagel C, Nilsson J, Boks C (1999) European end-of-life systems for electrical and electronic equipment. Proceedings of the First International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, pp 197–202, 1–3 Feb 1999

  24. Walther G, Spengler T (2005) Impact of WEEE-directive on reverse logistics in Germany. Int J Phys Distrib Logist Manag 35(5):337–361

    Article  Google Scholar 

  25. Feszty K, Murchison C, Baird J (2003) Assessment of the quantities of waste electrical and electronic equipment (WEEE) in Scotland. Waste Manag Res 21:207–217

    Article  Google Scholar 

  26. Karna A, Heiskanen E (1998) The challenge of ‘product chain’ thinking for product development and design—the example of electrical and electronic products. J Sustain Prod Des 4:26–36

    Google Scholar 

  27. Lehtinen U, Poikela K (2006) Challenges of WEEE on reverse logistics: a case study on a collection network in Finland. Proceedings of Logistics Research Network Annual Conference, The Chartered Institute of Logistics and Transport (UK), Newcastle, 6–8 Sep 2006

  28. He W, Li G, Ma X, Wang H, Huang J, Xu M, Huang C (2006) WEEE recovery strategies and the WEEE treatment status in China. J Hazard Mater 136(3):502–512

    Article  Google Scholar 

  29. Yu J, Welford R, Hills P (2006) Industry responses to EU WEEE and ROHS Directives: perspectives from China. Corp Soc Responsib Environ Manage 13(5):286–299

    Article  Google Scholar 

  30. Chien MK, Shih LH (2007) An empirical study of the implementation of green supply chain management practices in the electrical and electronic industry and their relation to organizational performances. Int J Environ Sci Tech 4(3):383–394

    Google Scholar 

  31. Moussiopoulos N, Koroneos C, Achillas H, Bouzakis KD, Michailidis N, Iakovou E, Xanthopoulos A, Chantzipanagioti M (2006) Decision-making on the alternatives for the end-of-life management of electrical and electronic equipment. Proceedings of the 6th International Symposium on Going Green Care Innovation, Vienna, Austria, 13–16 November 2006

  32. Boks C, Stevels A (2003) Theory and practice of environmental benchmarking in a major consumer electronics company. Benchmarking: Int J 10(2):120–135

    Article  Google Scholar 

  33. Dowie T (1994) Green design. World Class Des Manuf 1(4):32–38

    Article  Google Scholar 

  34. Huisman J (2003) The QWERTY/EE concept—quantifying recyclability and eco-efficiency for end-of-life treatment of consumer electronic products. Thesis Delft University of Technology, Delft, The Netherlands

  35. Karagiannidis A, Papadopoulos A, Moussiopoulos N, Perkoulidis G, Tsatsarelis Th, Michalopoulos A (2003) Characteristics of wastes from electric and electronic equipment in Greece: results of a field survey. Proceedings of the 8th International Conference on Environmental Science and Technology. Lemnos Island, Greece, pp 353–360, 8–10 Sep 2003

  36. Karagiannidis A, Perkoulidis G, Papadopoulos A, Moussiopoulos N, Tsatsarelis Th (2005) Characteristics of wastes from electric and electronic equipment in Greece: results of a field. Waste Manag Res 23(4):381–388

    Article  Google Scholar 

  37. Rose C, Beiter K, Ishii K, Masui K (1998) Characterization of product end-of-life strategies to enhance recyclability. ASME Design for Manufacturing Symposium, Atlanta, Georgia

  38. White CD, Masanet E, Rosen CM, Beckman SL (2003) Product recovery with some byte: an overview of management challenges and environmental consequences in reverse manufacturing for the computer industry. J Clean Prod 11:445–458

    Article  Google Scholar 

  39. de Ron A, Penev K (1995) Disassembly and recycling of electronic consumer products: an overview. Technovation 15(6):363–374

    Article  Google Scholar 

  40. Krikke H, Bloemhof J, Van Wassenhove L (2003) Concurrent product and closed-loop supply chain design with an application to refrigerators. Int J Prod Res 41(16):3689–3719

    Article  MATH  Google Scholar 

  41. Atasu A, Sarvary M, van Wassenhove L (2009) Efficient take-back legislation. Prod Oper Manag 18:243–258

    Google Scholar 

  42. Bloemhof-Ruwaard JM, Krikke H, van Wassenhove LN (2004) OR models for eco-eco closed loop supply chain optimization. In: Dekker R, Fleischmann M, Inderfurth K, van Wassenhove LN (eds) Reverse logistics: quantitative models for closed-loop supply chains. Springer-Verlag, Berlin, pp 357–379

    Google Scholar 

  43. Kleijn R, Hansen E, Huppes G, McLaren J, Pesonen H, Steevels A, Vanakari E, van der Wel H (1999) Electronic consumer goods case report. Available via http://www.leidenuniv.nl/cml/ssp/projects/chainet/drftelectr2.pdf

  44. Umeda Y, Nonomura A, Tomiyama T (2000) Study on life-cycle design for the post mass production paradigm. Artif Intell Eng Des, Anal Manuf 14(2):149–161

    Google Scholar 

  45. Shih LH (2001) Reverse logistics system planning for recycling electrical appliances and computers in Taiwan. Res Conserv Recycl 32:55–72

    Article  Google Scholar 

  46. Stutz M, Burkhard C, Ertel J (2002) Cost elements of recycling and the design of mobile phones in the context of WEEE. Proceedings of the 4th International Symposium on Going Green Care Innovation, Vienna, Austria, 25–28 Nov 2002

  47. Stevels A, Boks C (2002) On the effectiveness of currently proposed EU Environmental Directives and Policies for Electronic products. Proceedings from 2002 CARE Conference on Green Electronics

  48. Boks C, Nilsson J, Masui K, Suzuki K, Rose C, Lee BH (1998) An international comparison of product end-of-life scenarios and legislation for consumer electronics. Proceedings from the IEEE Symposium on Electronics and the Environment, pp 19–24

  49. Stevels (2003) Is the WEEE directive eco efficient? Proceedings of the International Symposium on Electronics and the Environment, Boston, Massachusettes, 19–22 May 2003, pp 7–12

  50. Cooper T (2000) WEEE, WEEE, WEEE, WEEE, all the way home? An evaluation of proposed electrical and electronic waste legislation. Eur Environ 10(3):121–130

    Article  Google Scholar 

  51. Forrester JW (1961) Industrial dynamics. MIT Press, Cambridge

    Google Scholar 

  52. Sterman JD (2000) Business dynamics: systems thinking and modeling for a complex world. McGraw-Hill, New York

    Google Scholar 

  53. Fleischmann M (2001) Quantitative models for reverse logistics. Springer, Berlin

    MATH  Google Scholar 

  54. Sterman JD (1991) A sceptic's guide to computer models. In: Barney GO, Kreutzer WB, Garrett MJ (eds) Managing a nation, the microcomputer software catalog. Westview Press, Boulder

    Google Scholar 

  55. Bloemhof-Ruwaard JM, van Beek P, Hordijk L, Van Wassenhove LN (1995) Interactions between operational research and environmental management. Eur J Oper Res 52(2):229–243

    Article  Google Scholar 

  56. Georgiadis P, Vlachos D, Iakovou E (2005) A system dynamics modeling framework for the strategic supply chain management of food chains. J Food Eng 70(3):351–364

    Article  Google Scholar 

  57. Thierry Μ, Salomon M, Van Nunen J, Van Wassenhove L (1995) Strategic issues in product recovery management. Calif Manage Rev 37(2):114–135

    Google Scholar 

  58. Van der Laan E, Salomon M, Dekker R (1999) An investigation of lead-time effects in manufacturing/remanufacturing systems under simple push and pull control strategies. Eur J Oper Res 115(1):195–214

    Article  MATH  Google Scholar 

  59. Biehl M, Prater E, Realff MJ (2007) Assessing performance and uncertainty in develo** carpet reverse logistics systems. Comput Oper Res 34(2):443–463

    Article  MATH  Google Scholar 

  60. Angell LC, Klassen RD (1999) Integrating environmental issues into the mainstream: an agenda for research in operations management. J Oper Manag 17(5):575–598

    Article  Google Scholar 

  61. Law 2939 (2001) Packaging and alternative management of packaging and other waste. Foundation of National Organization of Alternative Management of Packaging and Other Waste, Issue no. 179, 6 August, Athens

  62. Geyer R, Van Wassenhove L, Atasu A (2007) The economics of remanufacturing under limited component durability and finite life cycles. Manag Sci 53(1):88–100

    Article  Google Scholar 

  63. Klassen R (2005) Greening the supply chain: customers as strategic suppliers. McGill CLSC Symposium

  64. Forrester JW, Senge PM (1980) Tests for building confidence in system dynamics models. In: Legasto AA, Forrester JW, Lyneis JM (eds) System dynamics, studies in the management sciences. North Holland Publishing Company, Amsterdam, pp 209–228

    Google Scholar 

  65. Barlas Y (1996) Formal aspects of model validity and validation in system dynamics. Syst Dyn Rev 12(3):183–210

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Aristotle University of Thessaloniki, P.O. Box 461, 54124, Thessaloniki, Greece

    Patroklos Georgiadis & Maria Besiou

Authors
  1. Patroklos Georgiadis
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Maria Besiou
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Patroklos Georgiadis.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Georgiadis, P., Besiou, M. Environmental and economical sustainability of WEEE closed-loop supply chains with recycling: a system dynamics analysis. Int J Adv Manuf Technol 47, 475–493 (2010). https://doi.org/10.1007/s00170-009-2362-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-009-2362-7

Keywords

Search

Navigation