Abstract
The spatial distribution and structure of as-cast carbides and the effects of W, Mo, and V content on the morphology and amount of as-cast carbides in high-speed steels were studied systematically. It was shown that increasing the Mo and decreasing the W content led to a decrease in the amount of total eutectic carbide and an increase in the MC and M2C carbides. The eutectic morphology changed from skeletal to platelike when the content of Mo increased. The presence of V favored not only the formation of MC carbide but also the formation of M2C carbide and reduced the formation of M2C carbide. Increasing V led to an increase in the size of the eutectic carbides.
Similar content being viewed by others
References
K. Stiller, L.E. Svensson, P.R. Howell, Wang Rong, H.O. Andren, and G.L. Dunlop:Acta Metall., 1984, vol. 32, pp. 1457–67.
H. Fischmeister, S. Karagöz, and H.O. Andren:Acta Metall., 1988, vol. 36, pp. 817–25.
H. Fischmeister and I. Liem:Pract. Metallogr., 1987, vol. 14, pp. 323–32.
S. Karagöz and H. Fischmeister:Steel Res., 1987, vol. 1, pp. 46–51.
S. Karagöz and H. Fischmeister:Steel Res., 1987, vol. 1, pp. 353–61.
H. Fischmeiter, J. Panl, and S. Karagöz:Pract. Met., 1988, vol. 25, pp. 28–40.
R.H. Barkalow, R.W. Kraft, and J.I. Goldstein:Metall. Trans., 1972, vol. 3, pp. 919–26.
H.F. Fischmeister, R. RiedI, and S. Karagöz:Metall. Trans. A, 1989, vol. 20A, pp. 2133–48.
H.F. Fischmeister, R. Riedl, and S. Karagöz:Metall. Trans. A, 1989, vol. 20A, pp. 2133–48.
S. Karagöz, I. Liem, E. Bischoff, and H.F. Fischmeister:Metall. Trans. A, 1989, vol. 20A, pp. 2695–2701.
E.J. Galda and R.W. Kraft:Metall. Trans., 1974, vol. 5, pp. 1727–33.
H. Fredriksson:Scand. J. Met., 1976, vol. 5, pp. 268–75.
H. Fredriksson:Scand. J. Met., 1979, vol. 8, pp. 243–53.
G. Shi:Physical and Chemical Testing (in Chinese), 1989, No. 1, pp. 13-15.
R. Riedl, S. Karagöz, and H. Fischmeister:Z. Metallkd., 1983, vol. 74, pp. 467–78.
Ding Peidao and Zhou Shouze:J. Chongqing Univ., 1984, vol. 7, pp. 131–27.
S. Karagöz, R. Riedl, M.R. Gregg, and H. Fischmeister:Pract. Metallogr., 1983, vol. 14, pp. 269–82.
A. Fischer and E. Kohlhass:Pract. Metallogr., 1975, vol. 12, pp. 393–406.
G. Shi: M.S. Thesis, Chongqing University, Chongqing, People’s Republic of China, 1987.
Y. Sedov, Y.A. Geller, L.S. Kremnev, and A.G. Gordsiani:Metalloved. Term. Obrab. Met., 1975, pp. 4-9.
K. Bungardt, E. Haberling, A. Rose, and H.H. Weigand:DEW-Techn. Ber., 1972, vol. 12, 1972, pp. 111–13.
H. Fredrikssion, M. Hillert, and M. Nica:Scand. J. Metall., 1979 vol. 8, pp. 115–22.
S. Karagöz and R. Riedl:Pract. Metallogr., 1983, vol. 14, pp. 369–82
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ding, P., Shi, G. & Zhou, S. As-cast carbides in high-speed steels. Metall Trans A 24, 1265–1272 (1993). https://doi.org/10.1007/BF02668195
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/BF02668195