Abstract
The noise and vibration performance of powertrain is main contributor for vehicle NVH (Noise, Vibration and Harshness) issue. To achieve better NVH performance, it is critical to conduct NVH optimization during the powertrain initial design stage. This paper presents an investigation of optimize vehicle powertrain NVH performance via modification of excitation–radiation system of powertrain. To minimize excitation force of the gearbox with special focus on gear pair dynamic characteristics via the gear profile modification, and to reduce transmission housing noise radiation via enhance its stiffness, are the main objective of optimization. The excitation forces are analyzed by Multi Body Dynamics (MBD) method, considering different excitation mechanisms of the powertrain. The vibro-acoustic behavior of powertrain is obtained by FEM/BEM coupled analysis. The acoustic transfer vector (ATV) calculation is used to predict the powertrain sound power level (SPL) and panel contributions. Based on the acquired NVH data of the powertrain, the optimization which couples the transmission gear profile modification for attenuating gear system excitation and the structure stiffness modification for reducing transmission housing noise radiation is proposed. Experiment validation is conducted in order to evaluate the modified results. The evaluation shows that the optimization can effectively reduce powertrain noise and vibration.
F2012-J02-008
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Bousseau Y, Gagliardini L (2003) Powertrain acoustic characterization at high frequencies: acoustic source modeling based on sound intensity measurements. In: SAE paper 2003-01-1457
Jeong G, Jeong W, Young S, Wan S (2007) Optimization of crank angles to reduce excitation forces and moments in engines. J Mech Sci Technol 21(2):272–281
Charles LY, Karl DS (2003) Acoustic analysis of isolated engine valve covers. In: SAE paper 2003-01-1674
Dominic E, Andrew W (2005) Minimizing turbocharger whoosh noise for diesel powertrains. In: SAE paper 2005-01-2485
Feng H, Zuo Z, Liao R, Ma C (2004) Outer sound field simulation of a diesel engine based on coupled BEM/FEM method. Trans Csice 22(2):155–161
Platten M, Blockley C, James B, Prabahakaran S, Scott D (2009) Optimization of gear microgeometry for durability and NVH. Sound vibr 43(4):7–10
Hao Z, ** Y, Yang C (2007) Study of engine noise based on independent component analysis. J Zhejiang University Sci A 8(5):772–777
Hwang JY, Kim DW, Jeong WJ, Shin DH, Kang KT (2009) Optimization of the high frequency noise for the passenger car diesel engine. In: SAE paper 2009-01-2082
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Lu, S., Feng, H., Zuo, Z., Kang, L., Yu, B. (2013). NVH Optimization of Vehicle Powertrain. In: Proceedings of the FISITA 2012 World Automotive Congress. Lecture Notes in Electrical Engineering, vol 201. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-33832-8_11
Download citation
DOI: https://doi.org/10.1007/978-3-642-33832-8_11
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-33831-1
Online ISBN: 978-3-642-33832-8
eBook Packages: EngineeringEngineering (R0)