Abstract
At present, desertification management mainly adopts the method of laying grass squares. However, at present, the grass square lattice mainly relies on manual completion, low efficiency, and high cost. Therefore, the author’s team has developed a kind of intelligent grass square lattice laying vehicle. The device mainly includes: grass delivery device, laying mechanism, and traveling mechanism. The design of the device realizes the horizontal and vertical simultaneous laying of grass squares, instead of manual reinforcement of grass squares, which greatly improves the working efficiency, reduces the amount of manual labor, and solves the problems existing in the traditional sand fixing vehicle. The prototype test results show that the device can complete the task with higher speed and better laying effect. The intelligent grass lattice laying vehicle proposed in this paper has high practicality and feasibility, which is of great significance to improve the efficiency and quality of grass lattice laying, and at the same time provides a new research idea for other researchers in the field of desertification management.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Jiang RS (2020) Analysis of the application of grass square sand barriers in wind and sand control. Agric Disaster Res 10(09):126–127+129. https://doi.org/10.19383/j.cnki.nyzhyj.2020.09.051
Yuan JC, Chang TL, Zhang YH (2022) Mechanism design of scattered straw square laying robot. Mach Manuf 60(06):15–18. https://kns.cnki.net/kcms2/article/abstract?v=3uoqIhG8C44YLTlOAiTRKibYlV5Vjs7iJTKGjg9uTdeTsOI_ra5_Xe0OYoLHPBrycLpA0wQg8yOUusBCrYZqStITxkemiEGQ&uniplatform=NZKPT&src=copy
Li XD, Mou R, Dai M, Qiu JH (2018) A new model of sand control based on mechanization. Temp For Res 1(04):58–62. https://kns.cnki.net/kcms2/article/abstract?v=3uoqIhG8C44YLTlOAiTRKibYlV5Vjs7iLik5jEcCI09uHa3oBxtWoPKZa5iiD8FgWBc9wM03vFowwv0RyJYBZk3F4hjPFAsw&uniplatform=NZKPT&src=copy
Xu XY, Zhao P, Tang JN, Ji YF, Ma XB (2020) China’s sand control machinery research and development status and prospects. For Grassland Mach 1(02):21–25. https://doi.org/10.13594/j.cnki.mcjgjx.2020.02.006
Liu YC, Cao XG, Liu JJ (2005) A preliminary study on the design and experimental research of grass square laying robot laying wheel system. For Mach Woodwork Equip 04:14–16. https://kns.cnki.net/kcms2/article/abstract?v=3uoqIhG8C44YLTlOAiTRKgchrJ08w1e7F1IFNsBV5UuydnAfkZZjeYA_ZlNIwUvr_imyzpJMnTuHk2uo0lMBgRHmYPc7uQ2M&uniplatform=NZKPT&src=copy
Shu Q, Liu JH (2007) Robot possibility study for laying grass squares for wind protection and sand fixation. J Agric Mach 07:99–102+120. https://kns.cnki.net/kcms2/article/abstract?v=3uoqIhG8C44YLTlOAiTRKgchrJ08w1e7aLpFYbsPrqGeMWhI2KbO71LTQ7fx9U8hpuzIqGWg9ZTLrUb3U5g0QN5CoQPNkzkL&uniplatform=NZKPT&src=copy
Wang GK, Liu YB (2007) Design of an Integrated and efficient control system for a grass square laying robot. Technol Consult Herald 20:11. https://doi.org/10.16660/j.cnki.1674-098x.2007.20.011
Li XD, Mou R, Dai M, Qiu JH (2018) A new model of sand control based on mechanization. Temp For Res 1(4):58–62. https://kns.cnki.net/kcms2/article/abstract?v=3uoqIhG8C44YLTlOAiTRKibYlV5Vjs7iLik5jEcCI09uHa3oBxtWoPKZa5iiD8FgWBc9wM03vFowwv0RyJYBZqJC4-c-_J6l&uniplatform=NZKPT&src=copy
Kong DR, Sun BG, Zhang KP, Zhang P, Qi Y, Zhang L (2022) China’s grass square sand barrier laying machinery research and development status and outlook. For Mach Woodwork Equip 50(11):24–30. https://doi.org/10.13279/j.cnki.fmwe.2022.0161
Zhang Y (2022) The “greening of the country” needs to be empowered by science and technology. Ningxia Daily, 2022-03-09(006). https://doi.org/10.28607/n.cnki.nnxrb.2022.000767
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Chen, X. et al. (2024). Mechanical Design of an Intelligent Grass Square Laying Vehicle. In: Yadav, S., Arya, Y., Muhamad, N.A., Sebaa, K. (eds) Energy Power and Automation Engineering. ICEPAE 2023. Lecture Notes in Electrical Engineering, vol 1118. Springer, Singapore. https://doi.org/10.1007/978-981-99-8878-5_31
Download citation
DOI: https://doi.org/10.1007/978-981-99-8878-5_31
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-8877-8
Online ISBN: 978-981-99-8878-5
eBook Packages: EnergyEnergy (R0)