Abstract
The steel industry is a major source of energy consumption and environmental pollution. The sintering manufacturing process is an important part of iron and steel production. In recent years, with the continuous expansion of iron and steel production capacity, the sintering industry has developed at an unprecedented speed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cai J (2009) The energy and resources saving technologies applied in Chinese iron and steel industry and their development. World Iron Steel 9(4):1–13
Fengguang H, He** L, Lixian X, et al (2017) Research on oxygen-rich injection technology based on intensified sintering with COG. In: Proceedings of the 11th CSM steel congress, Bei**g
Hailian Y (2016) Modification process design for COG-assisted sintering in Meisteel. Sci Technol Inf 14(34):88, 90
Han F, Lixian Xu, **anfu Wu et al (2016) Technical research on sintering intensification with coke oven gas injection. Sinter Pelletizing 3:35–40
Haoyu Z, Kuiwen L, Jianfu L, et al (2018) Development and application of key equipment technology for top gas injection in sintering process. Sinter Pelletizing 43(4):22–26, 32
He** L, Huiyuan N, Fengguang H, et al (2015) Application of intensified sintering technology with COG in Meistee. Sinter Pelletizing 40(6):1–3, 35
Huang W, Zhijun H, Wenlong Z, et al (2020) Reduction behavior of iron-bearing burdens in hydrogen-rich stream. Iron Steel 55(7):34–40, 84
JFE developed hydrogen gas fuel injection technology for sintering. Sinter Pelletizing 37(5):5 (2012)
Junjie Z, Yuandong P, **aodong Z, et al (2021) Natural gas injection practice in a 550 m2 sinter machine. World Metals, 2021-02-02 (B02)
Li C (2009) JFE Steel developed technology that can significantly reduce CO2 emissions in sinter ore production. World Iron Steel 9(4):18
Li W (2012) Investigation on optimizing permeability and temperature field of sintering bed. Central South University, Changsha
Nobuyuki O, Yuji I, He HL, et al (2013) Reduction of CO2 emissions with gas fuel injection technology in the sintering machines. World Iron Steel 13(1):16–22
Oyama N, Iwami Y, Yamamoto T et al (2011) Development of secondary-fuel injection technology for energy reduction in the iron ore sintering process. ISIJ Int 51(6):913–921
Takeda K, Anyashiki T, Wanren Xu et al (2012) Recent developments and mid and long term CO2 mitigation projects in ironmaking. World Iron Steel 12(6):1–7
Technology for reducing energy consumption by injecting ancillary fuels in sintered ore production. Sinter Pelletizing 37(2):5 2012 (2012)
The technical society, the iron and steel institute of Japan. Production and technology of iron and steel in Japan during 2009. ISIJ Int 50(6) 777–796 (2010)
Wang H, Zhao W, Chu M et al (2017) Current status and development trends of innovative blast furnace ironmaking technologies aimed at environmental harmony and operation intellectualization. J Iron Steel Res Int 24(8):751–769
Wang S (2013) Study on energy saving and environmental protection in iron ore sintering process. Wuhan University of Science and Technology, Wuhan
Wentao Z, Junge H, Yanling G, et al. (2013) The latest progress of Japanese and South Korean sintering technology and analysis of industrial application prospect. Sinter Pelletizing 38(3):5–8+15
**aoxian H, **aohui F, Zhiyun J, et al (2019) Investigation into the characteristics of H2-rich gas injection over iron ore sintering process: experiment and modeling. Appl Therm Eng 157
Yang W , Blasiak W (2005) Numerical study of fuel temperature influence on single gas jet combustion in highly preheated and oxygen deficient air. Energy 30(2/4):385–398
Ye H, Zhou H, Wang Z et al (2020) Research and prospect of high proportion hydrogen-rich fuel sintering technology. Sinter Pelletizing 45(5):1–7
Yi W, Jianghong Z, **ao**g L, et al (2020) Research and development on method of homogeneously injecting flammable gases on surface of sintering material. Sinter Pelletizing 45(3):13–16, 66
Yi W, ** Z (2019) Research on visualization technology of gas fuel injection uniformity on sintering process. In: Proceedings of the 12th CSM steel congress, Bei**g
Zhiyun J, Haoyu Z, **aohui F, et a1 (2020) Insight into the application of hydrogen-rich energy in iron ore sintering: parameters optimization and function mechanism. Process Saf Environ Prot 135(C):91–100
Zhu W (2014) JFE Steel developed new technology for sinter ore production. World Iron Steel 14(4):32
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2024 Metallurgical Industry Press
About this chapter
Cite this chapter
Zhang, J., Li, K., Liu, Z., Yang, T. (2024). Hydrogen Behavior in the Sintering Process. In: Primary Exploration of Hydrogen Metallurgy. Springer, Singapore. https://doi.org/10.1007/978-981-99-6827-5_7
Download citation
DOI: https://doi.org/10.1007/978-981-99-6827-5_7
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-6826-8
Online ISBN: 978-981-99-6827-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)