SpringerLink
Log in

Optimization of Hole Characteristics During LTD of ZTA Plate

  • Conference paper
  • First Online:
Recent Advances in Industrial Machines and Mechanisms (IPROMM 2022)

Part of the book series: Lecture Notes in Mechanical Engineering ((LNME))

  • 177 Accesses

Abstract

Excellent hardness and toughness of zirconia toughened alumina (ZTA) ceramic composite make it worthy to fabricate the parts for defense, aerospace and bio-implants industries. But machining of ZTA in acceptable tolerance is challenging due to its improved properties. In this paper, optimum values of variable factors for multiple hole quality characteristics are evaluated using genetic algorithm. Multiple hole quality characteristics include circularity and taper of laser trepanned hole in thick ZTA. The overall improvement is found approximately 33%. Further, optimum results are verified with confirmation experiment that shows small variation of 4.89%.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 219.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 279.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free ship** worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Wang J, Stevens R (1989) Review Zirconia toughened alumina (ZTA) ceramics. J Mater Sci 24:3421–3440

    Article  Google Scholar 

  2. Saini SK, Dubey AK, Upadhyay BN, Choubey A (2018) Study of hole characteristics in laser trepan drilling of ZTA. Opt Laser Technol 103:330–339

    Article  Google Scholar 

  3. Wang H, Lin HT, Wang C, Zheng L, Hu X (2017) Laser drilling of structural ceramics—a review. J Eur Ceram Soc 37:1157–1173

    Google Scholar 

  4. Zhang J, Long Y, Liao S, Lin HT, Wang C (2017) Effect of laser scanning speed on geometrical features of Nd:YAG laser machined hole in thin silicon nitride substrate. Ceram Int 43:2938–2942

    Article  Google Scholar 

  5. Duan W, Wang K, Dong X, Mei X, Wang W, Fan Z (2016) Experimental characterizations of burr deposition in Nd:YAG laser drilling: a parametric study. Int J Adv Manuf Technol 76:1529–1542

    Article  Google Scholar 

  6. Saini SK, Dubey, Upadhyay BN (2019) Study and optimization of recast layer thickness and surface quality in laser trepan drilling of ZTA. Int J Adv Manuf Technol. https://doi.org/10.1007/s00170-019-03704-3

  7. Saini SK, Dubey AK, Pant P, Upadhyay BN, Choubey A (2017) Study of laser drilled hole quality of Yttria Stabilized Zirconia. Lasers Manuf Mater Process 4:121–135

    Google Scholar 

  8. Saini SK, Dubey AK (2019) Study of material characteristics in laser trepan drilling of ZTA. J Manuf Process 44:349–358

    Article  Google Scholar 

  9. Saini SK, Dubey AK (2021) Parameters optimization for microcrack width in laser trepanned hole. J Mater Today Proc 44:3055–3058

    Article  Google Scholar 

  10. Deb K (2012) Optimization for engineering design. PHI Learning Private Limited New Delhi

    Google Scholar 

Download references

Acknowledgements

Thanks to ARDB New Delhi, Government of India for financial assistance through the sanction order no. AR&DB/01/2031751/M/I. Also gratefully acknowledge the help rendered by Dr. B. N. Upadhyay and his team of RRCAT, Indore.

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, Poornima College of Engineering, Jaipur, Rajasthan, India

    Surendra Kumar Saini

  2. Department of Mechanical Engineering, MNNIT Allahabad, Prayagraj, UP, India

    Avanish Kumar Dubey

Authors
  1. Surendra Kumar Saini
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Avanish Kumar Dubey
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Surendra Kumar Saini .

Editor information

Editors and Affiliations

  1. Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, India

    Sanjoy K. Ghoshal

  2. Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India

    Arun K. Samantaray

  3. Department of Engineering Design, Indian Institute of Technology Madras, Chennai, India

    Sandipan Bandyopadhyay

Rights and permissions

Reprints and permissions

Copyright information

© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Saini, S.K., Dubey, A.K. (2024). Optimization of Hole Characteristics During LTD of ZTA Plate. In: Ghoshal, S.K., Samantaray, A.K., Bandyopadhyay, S. (eds) Recent Advances in Industrial Machines and Mechanisms. IPROMM 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-99-4270-1_59

Download citation

  • DOI: https://doi.org/10.1007/978-981-99-4270-1_59

  • Published:

  • Publisher Name: Springer, Singapore

  • Print ISBN: 978-981-99-4269-5

  • Online ISBN: 978-981-99-4270-1

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation