Abstract
In geotechnical engineering, the ultimate bearing capacity of soils under strip footing is an important problem. The ultimate bearing capacity is defined as the least pressure that will cause complete shear failure of the soil in the vicinity of the foundation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Budhu M (2007) Soil mechanics and foundations, 2nd edn. Wiley, Hoboken
Craig RF (2004) Craig’s soil mechanics, 7th edn. CRC Press, Boca Raton
Fan W, Lin Y, Qin Y (2003) Formula for critical load of foundation based on the UST. J Changan Univ Earth Sci Ed 25(3):48–51 (in Chinese)
Fan W, Bai XY, Yu MH (2005) Formula of ultimate bearing capacity of shallow foundation based on UST. Rock Soil Mech 26(10):1617–1623 (in Chinese)
Geiringer H (1930) Beit zum vollstandigen ebenen plastizitats-problem. In: Proceedings of the 3rd international congress on applied mechanics, vol 2, pp 185–190
Hencky H (1923) Ueber einige statisch bestimmte faelle des gleichgewichts in plastischen koerpern. Z Angew Math Mech 3:245–251
Hill R (1950) The mathematical theory of plasticity. Clarendon, Oxford
Johnson W, Mellor PB (1962) Plasticity for mechanical engineers. Van Nostrand, London and New York
Liu J, Zhao MH (2005) Researches on behaviour of composite foundation with single granular column based on unified twin shear strength theory. Chin J Geotech Eng 27(6):707–711 (in Chinese)
Lu YE, Zheng JJ, Chen BG (2007) Determination of end bearing capacity of pile with double-shear slip-line theory. Chin J Rock Mech Eng 26(supp.2):4084–4089 (in Chinese)
Ma ZY, Dang NF, Liao HJ (2013) Numerical solution for bearing capacity of strip footing considering influence of intermediate principal stress. Chin J Geotech Eng 35(2):253–258 (in Chinese)
Ma ZY, Liao HJ, Dang FN (2014a) Effect of intermediate principal stress on flat-ended punch problems. Arch Appl Mech 84(2):277–289
Ma ZY, Liao HJ, Dang FN (2014b) Influence of intermediate principal stress on the bearing capacity of strip and circular footings. J Eng Mech ASCE 140(7):04014041
Prager W (1949) Recent developments in the mathematical theory of plasticity. J Appl Phys 20:235–241
Sui FT, Wang SJ (2011) Research on application of UST to determining of bearing capacity of foundations. Rock Soil Mech 32(10):3038–3042 (in Chinese)
Terzaghi K, Peck RB, Mesri G (1996) Soil mechanics in engineering practice, 3rd edn. Wiley, New York
Wang XQ, Yang LD, Gao WH (2006) Calculation of bearing capacity about the strip foundation based on the twin shear UST. Chin Civil Eng J 39(1):79–82 (in Chinese)
Yang XL, Li L, Du SC et al (2005) Double shear unified solution of Terzaghi ultimate bearing capacity of foundation. Chin J Rock Mech Eng 24(15): 2736–2740 (in Chinese)
Yu MH, Li JC (2012) Computational plasticity: with emphasis on the application of the UST. Springer and ZJU Press
Yu MH, Liu JY, Liu CY (1994) Orthogonal and non-orthogonal slip line field theory on the basis of twin shear strength theory. J **’an Jiao Tong Univ 28(2):122–126 (in Chinese)
Yu MH, Yang SY, Liu CY (1997) Unified plane-strain slip line theory. China Civil Eng J 30(2):14–26 (in Chinese)
Yu MH, Ma GW et al (2006) Generalized plasticity. Springer, Berlin
Zhou XP, Huang YB, Ding ZC (2002a) Influence of intermediate principal stress on formula of Terzaghi ultimate bearing capacity of foundations. Chin J Rock Mech Eng 21(10):1554–1556 (in Chinese)
Zhou XP, Wang JH Zhang YX (2002b) Calculation of the ultimate bearing capacity of foundation under triaxial compressive loading. J Chongqing Jianzhu Univ 24(3):28–32 (in Chinese)
Zhu F, Nie L, Gao ZF et al (2015) Improved calculation method of critical filling height of embankment on soft ground. J Jilin Univ (Engineering) 45(2):389–393 (in Chinese)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2023 Springer Nature Singapore Pte Ltd. and Zhejiang University Press
About this chapter
Cite this chapter
Yu, MH. (2023). Ultimate Bearing Capacity of Strip Footings. In: Soil Mechanics. Springer, Singapore. https://doi.org/10.1007/978-981-99-2781-4_8
Download citation
DOI: https://doi.org/10.1007/978-981-99-2781-4_8
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-99-2780-7
Online ISBN: 978-981-99-2781-4
eBook Packages: EngineeringEngineering (R0)