Abstract
This chapter provides information on the efficient utilization of polymer and polymeric composites with the aid of 3D printing. Polymer materials encompass a broad range of materials, including thermoplastics, photopolymers, and composites. This diversity offers a versatile palette for creating complex structures with specific mechanical, thermal, and chemical characteristics. It is easier to produce prototypes, specialized parts, and end-use components for industries with rapid design evolution and on-demand production capabilities, which meets the changing demands of the market and encourages the shift towards more environmentally friendly and productive manufacturing techniques. Furthermore, it explored the significant influence of polymers in the field of additive manufacturing, emphasizing their distinct characteristics and the diverse range of uses they provide. Polymer integration in 3D printing technologies has transformed production in a numerous sector and allowed for many novel applications and uses. The overview of polymer-based 3D printing procedures emphasizes the importance of material choice, processing settings, and design details for achieving the functional requirements. Thus, the incorporation of polymers into 3D printing has completely changed the standards of production and has an extensive number of uses in a wide range of sectors. The flexibility, adaptability, and material variety of polymers in additive manufacturing highlight their critical role in influencing the direction of production and providing opportunities for innovative ideas and continual advancements.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Park, S., Shou, W., Makatura, L., Matusik, W., Fu, K.K.: 3D printing of polymer composites: Materials, processes, and applications. Matter 5(1), 43–76 (2022)
Feldman, D.: Polymer history. Des. Monomers Polym., 11(1), 1–15 (2008)
Dizon, J.R.C., Espera, A.H., Jr., Chen, Q., Advincula, R.C.: Mechanical characterization of 3D-printed polymers. Addit. Manuf. 20, 44–67 (2018)
Wohlers, T., Gornet, T., Mostow, N., Campbell, I., Diegel, O., Kowen, J., Huff, R., Stucker, B., Fidan, I., Doukas, A., Drab, B.: History of additive manufacturing. (2016)
Zhang, X.: 3D printing of bio-inspired, multi-material structures to enhance stiffness and toughness. Doctoral dissertation, The University of Waikato (2021)
Paritala, S., Singaram, K.K., Bathina, I., Khan, M.A., Jyosyula, S.K.R.: Rheology and pumpability of mix suitable for extrusion-based concrete 3D printing–A review. Constr. Build. Mater. 402, 132962 (2023)
Sydney Gladman, A., Matsumoto, E.A., Nuzzo, R.G., Mahadevan, L., Lewis, J.A.: Biomimetic 4D printing. Nat. Mater. 15(4), 413–418 (2016)
Schwartz, J.J., Boydston, A.J.: Multimaterial actinic spatial control 3D and 4D printing. Nat. Commun. 10(1), 791 (2019)
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Tibbits, S.: Active printed materials for complex self-evolving deformations. Sci. Rep. 4(1), 7422 (2014)
Zhang, Q., Zhang, K., Hu, G.: Smart three-dimensional lightweight structure triggered from a thin composite sheet via 3D printing technique. Sci. Rep. 6(1), 22431 (2016)
Van Manen, T., Janbaz, S., Zadpoor, A.A.: Programming 2D/3D shape-shifting with hobbyist 3D printers. Mater. Horiz. 4(6), 1064–1069 (2017)
Long, K.N., Scott, T.F., Qi, H.J., Bowman, C.N., Dunn, M.L.: Photomechanics of light-activated polymers. J. Mech. Phys. Solids 57(7), 1103–1121 (2009)
Wei, H., Zhang, Q., Yao, Y., Liu, L., Liu, Y., Leng, J.: Direct-write fabrication of 4D active shape-changing structures based on a shape memory polymer and its nanocomposite. ACS Appl. Mater. Interfaces 9(1), 876–883 (2017)
Van Oosten, C.L., Bastiaansen, C.W., Broer, D.J.: Printed artificial cilia from liquid-crystal network actuators modularly driven by light. Nat. Mater. 8(8), 677–682 (2009)
Yuan, C., Roach, D.J., Dunn, C.K., Mu, Q., Kuang, X., Yakacki, C.M., Qi, H.J.: 3D printed reversible shape changing soft actuators assisted by liquid crystal elastomers. Soft Matter 13(33), 5558–5568 (2017)
Kotikian, A., Truby, R.L., Boley, J.W., White, T.J., Lewis, J.A.: 3D printing of liquid crystal elastomeric actuators with spatially programed nematic order. Adv. Mater. 30(10), 1706164 (2018)
Gantenbein, S., Masania, K., Woigk, W., Sesseg, J.P., Tervoort, T.A., Studart, A.R.: Three-dimensional printing of hierarchical liquid-crystal-polymer structures. Nature 561(7722), 226–230 (2018)
Rim, Y.S., Bae, S.H., Chen, H., De Marco, N., Yang, Y.: Recent progress in materials and devices toward printable and flexible sensors. Adv. Mater. 28(22), 4415–4440 (2016)
Mao, S., Dong, E., **, H., Xu, M., Low, K.H.: Locomotion and gait analysis of multi-limb soft robots driven by smart actuators. In: 2016 IEEE/RSJ International conference on intelligent robots and systems (IROS), pp 2438–2443. IEEE, (2016)
Gao, B., Yang, Q., Zhao, X., **, G., Ma, Y., Xu, F.: 4D bioprinting for biomedical applications. Trends Biotechnol. 34(9), 746–756 (2016)
Khan, M.A., Kumar, S., Cantwell, W.J.: Additively manufactured cylindrical systems with stiffness-tailored interface: Modeling and experiments. Int. J. Solids Struct. 152, 71–84 (2018)
Wang, X., Jiang, M., Zhou, Z., Gou, J., Hui, D.: 3D printing of polymer matrix composites: A review and prospective. Compos. B Eng. 110, 442–458 (2017)
Singh, M., Haverinen, H.M., Dhagat, P., Jabbour, G.E.: Inkjet printing—process and its applications. Adv. Mater. 22(6), 673–685 (2010)
Sola, A., Bellucci, D., Cannillo, V.: Functionally graded materials for orthopedic applications–an update on design and manufacturing. Biotechnol. Adv. 34(5), 504–531 (2016)
Schmid, M., Amado, A., Wegener, K.: Polymer powders for selective laser sintering (SLS). In:Â AIP Conference proceedings, vol. 1664, no. 1. AIP Publishing, (2015)
**a, Y., Zhou, P., Cheng, X., **e, Y., Liang, C., Li, C., Xu, S.: Selective laser sintering fabrication of nano-hydroxyapatite/poly-ε-caprolactone scaffolds for bone tissue engineering applications. Int. J. Nanomedicine, 4197–4213 (2013)
Akhoundi, B., Behravesh, A.H., Bagheri Saed, A.: An innovative design approach in three-dimensional printing of continuous fiber–reinforced thermoplastic composites via fused deposition modeling process: in-melt simultaneous impregnation. Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf. 234(1–2), 243–259 (2020)
Lescot, T., Lebel-Cormier, M.A., Seniwal, B., Gros-Louis, P., Bellerive, C., Landreville, S., Fortin, M.A.: Tumor shape-specific brachytherapy implants by 3D-printing, precision radioactivity painting, and biomedical imaging. Adv. Healthcare Mater. 12(25), 2300528 (2023)
Matsuzaki, R., Ueda, M., Namiki, M., Jeong, T.K., Asahara, H., Horiguchi, K., Hirano, Y.: Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation. Sci. Rep. 6(1), 23058 (2016)
Utela, B., Storti, D., Anderson, R., Ganter, M.: A review of process development steps for new material systems in three-dimensional printing (3DP). J. Manuf. Process. 10(2), 96–104 (2008)
Somireddy, M., Singh, C.V., Czekanski, A.: Mechanical behaviour of 3D printed composite parts with short carbon fiber reinforcements. Eng. Fail. Anal. 107, 104232 (2020)
Hong, S.Y., Kim, Y.C., Wang, M., Kim, H.I., Byun, D.Y., Nam, J.D., Suhr, J.: Experimental investigation of mechanical properties of UV-Curable 3D printing materials. Polymer 145, 88–94 (2018)
Chen, J., Liu, X., Tian, Y., Zhu, W., Yan, C., Shi, Y., Zhou, K.: 3D-Printed anisotropic polymer materials for functional applications. Adv. Mater. 34(5), 2102877 (2022)
Gadelmoula, A., Aldahash, S.A.: Tribological properties of glass bead-filled polyamide 12 composite manufactured by selective laser sintering. Polymers 15(5), 1268 (2023)
Karkun, M.S., Dharmalingam, S.: 3D printing technology in aerospace industry–a review. Int. J. Aviat., Aeronaut., Aerosp. 9(2), 4 (2022)
Alhaddad, A.Y., AlKhatib, S.E., Khan, R.A., Ismail, S.M., Shehadeh, A.S.S., Sadeq, A.M., Cabibihan, J.J.: Toward 3D printed prosthetic hands that can satisfy psychosocial needs: gras** force comparisons between a prosthetic hand and human hands. In: Social Robotics: 9th international conference, ICSR 2017, Tsukuba, Japan, November 22–24, 2017, Proceedings, vol. 9, pp. 304–313. Springer International Publishing
Honigmann, P., Sharma, N., Okolo, B., Popp, U., Msallem, B., Thieringer, F.M.: Patient-specific surgical implants made of 3D printed PEEK: material, technology, and scope of surgical application. BioMed Res. Int., (2018)
Mirdamadi, E., Tashman, J.W., Shiwarski, D.J., Palchesko, R.N., Feinberg, A.W.: FRESH 3D bioprinting a full-size model of the human heart. ACS Biomater. Sci. Eng. 6(11), 6453–6459 (2020)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this chapter
Cite this chapter
Abdul, W., Durgaiahsangam, H., Jyosyula, S., Khan, M.A. (2024). 3D Printing of Polymer and Polymer Matrix Composites. In: Moharana, S., Sahu, B.B., Nayak, A.K., Tiwari, S.K. (eds) Polymer Composites. Engineering Materials. Springer, Singapore. https://doi.org/10.1007/978-981-97-2075-0_9
Download citation
DOI: https://doi.org/10.1007/978-981-97-2075-0_9
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-97-2074-3
Online ISBN: 978-981-97-2075-0
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)