Abstract
Top drive system (TDS) is an important equipment in drilling operation, and its normal operation plays a crucial role in drilling and downhole safety. With the increasing complexity of drilling conditions, TDS is also develo** towards larger size and higher power, and equipment failure has attracted increasing attention. The application of fault diagnosis technology in TDS’s fault diagnosis can improve the reliability of TDS, reduce its maintenance cost, and provide scientific basis for intelligent management and maintenance. The existing fault diagnosis methods of top drive are classified, the basic principles and advantages and disadvantages of these methods are pointed out through the analysis of the existing qualitative and quantitative fault diagnosis methods of TDS, which provides a theoretical basis for the application and development of the TDS’s fault diagnosis methods. On above basis, the predictive maintenance (PdM), a hot research topic in the future, is discussed. Different from the condition-based maintenance (CBM), the PdM is more focused on the prediction and utilization of the future state of the system, which can truly prevent the failure before it occurs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yuan, X., Huang, D., Guo, B.: The importance of field maintenance and maintenance of top drive. Chem. Ind. Manag. (26), 81–82 (2018)
Wei, X., Yangkai, W.: Crack fault analysis and suggestion of top drive spindle. Chem. Eng. Des. Commun. 43(12), 97 (2017)
Jian, C., Wenqing, L., **gxian, F., et al.: Fault diagnosis technology of VARCO top drive overheat protection. Pet. Chem. Equip. 19(11), 78–80 (2016)
Jia, B.: VARCO 11SA Top drive main motor burn fault analysis and treatment. Equip. Manag. Maintenance 1, 54–55 (2019)
Zhou, G.: TESCO 900ECI top drive B motor fault case analysis and repair process. Petrochemical Technol. 24(10), 68–70 (2017)
Jianhua, J., Jianguo, H.: Mechanical Fault analysis and preventive measures of VARCO top drive inverter main motor. Equip. Manag. Maintenance 12, 45–46 (2017)
Tang, Y.: Common fault diagnosis and solution of VARCO top drive. Oil Field Equip. 9, 84–86 (2011)
Li, C., Guo, K., Liu, J., et al.: Diagnosis method of common fault of encoder used in electronic control system of direct drive top drive drill. Geol. Equip. 20(1), 24–25 (2019)
Guo, X.: Fault diagnosis of top drive device based on material field analysis and standard Solution. Mech. Res. Appl. 22(6), 91–94 (2009)
Liu, S., Peng, Y., Zhang, G., et al.: Fault diagnosis expert system for top drive system based on FTA. In: Proceedings of the 40th Chinese Control Conference, Shanghai, China (2021)
Liu, S., Zhang, G., Peng, Y.: Design of fault diagnosis and predictive maintenance system for top drive equipment. In: Proceedings of 2022 Chinese Automation Congress, **amen, China (2022)
Zhang, Y.: Research on real-time monitoring and fault diagnosis of offshore Drilling Equipment. China University of Petroleum (2010)
Aiguo, J.: Fault diagnosis of top drive gearbox based on resonance sparse deconvolution analysis. China Pet. Mach. 46(8), 6–13 (2018)
Huo, L.: Construction of VARCO Fault diagnosis expert system for top drive. China University of Petroleum (East China) (2010)
Liancai, H., An, L.: Construction of knowledge base of top drive fault diagnosis expert system based on CLIPS. Mod. Manufact. Technol. Equip. 5, 67–68 (2009)
**gjun, X.: How to reduce wear of top drive main bearing. Petrochemical Technol. 24(6), 272 (2017)
Zhongli, L.: Process condition monitoring and fault diagnosis Based on data riving. North China Electric Power University (Bei**g) (2017)
Dong, F.: Research on rolling bearing fault diagnosis based on data driven. China University of Mining and Technology (2018)
Zhang, Y., Wang, B., Sun, M., et al.: Application of Win CC trend screen in fault analysis of beishi top drive. Electr. Autom. 37(3), 101–102,111 (2015)
Guessenson. Development of gearbox fault diagnosis system based on vibration signal analysis. North China Electric Power University (2011)
He, W.: Gearbox fault diagnosis based on HHT and WNN. Wuhan Institute of Technology (2011)
Yu, X.: Research on Data-driven fault feature analysis and diagnosis of rolling bearing. China University of Mining and Technology (2017)
Ni, Z., Lizhi, C., **ao**. W.: Research status and prospect of data-driven fault diagnosis technology. Comput. Sci. 44(Suppl.1), 37–42 (2017)
Qinming, L.: Research on Online health prediction and Maintenance optimization of equipment based on condition monitoring information. Shanghai Jiao Tong University (2014)
Muruganatham, B., Sanjith, M.A., Krishnakumar, B., et al.: Roller element bearing fault diagnosis using singular spectrum analysis. Mech. Syst. Signal Process. 35(1), 150–166 (2013)
Soualhi, A., Medjaher, K., Zerhouni, N.: Bearing health monitoring based on Hilbert-Huang transform, support vector machine, and regression. IEEE Trans. Instrum. Meas. 64(1), 52–62 (2014)
Saidi, L., Ben, A.J., Fnaiech, F.: Application of higher order spectral features and support vector machines for bearing faults Classification. ISA Trans. 54, 193–206 (2015)
Wang, Y., **uye, W.: Research on bearing fault diagnosis based on hybrid frog jump optimization neural network. J. Mech. Trans. 41(5), 127–131 (2017)
Ming, Y., Chuanyang, D., Dianguo, X.: Gear fault diagnosis methods based on motor drive system. Trans. China Electrotechnical Soc. 31(4), 58–63 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 Bei**g Paike Culture Commu. Co., Ltd.
About this paper
Cite this paper
Liu, S., Zhang, G., Wang, S., Sun, H. (2024). Overview of Fault Diagnosis Methods for Top Drive System. In: Yang, Q., Li, Z., Luo, A. (eds) The Proceedings of the 18th Annual Conference of China Electrotechnical Society. ACCES 2023. Lecture Notes in Electrical Engineering, vol 1168. Springer, Singapore. https://doi.org/10.1007/978-981-97-1068-3_71
Download citation
DOI: https://doi.org/10.1007/978-981-97-1068-3_71
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-97-1067-6
Online ISBN: 978-981-97-1068-3
eBook Packages: EngineeringEngineering (R0)