Abstract
With the development of the times, the non-destructive testing technology of concrete has been continuously explored by countless scientific researchers to meet the requirements of contemporary people for architecture. It is moving toward more accurate, low-cost, portable, non-radioactive, non-injectable, and the development of features such as visualization and electrical resistance tomography (ERT) technology has these features. This article mainly introduces the development process of this technology from the application research of electrical resistance tomography, sensor unit, image reconstruction unit, three aspects introduce the development of ERT, and briefly summarize the research progress of conductive concrete. The problems that need to be solved in the development of ERT technology and the development of ERT in the field of concrete non-destructive testing are put forward.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
**ao, L.Q.: Research on Finite Element Model Optimization and Image Reconstruction Algorithm of Electrical Resistance Tomography. Tian** University (2014)
Henderson, R.P., Webster, J.G.: An impedance camera for spatially specific measurements of the thorax. IEEE Trans. Biomed. Eng. 25(3), 250–254 (1978)
Barber, D.C., Brown, B.H.: Applied potential tomography. J. Phys. E. Sci. Instrum. 17(9), 723 (1984)
Sylvester, J., Uhlmann, G.: A global uniqueness theorem for an inverse boundary value problem. Ann. Math. 125(1), 153–169 (1987)
McKee, S.L., Williams, R.A., Boxman, A.: Development of solid-liquid mixing models using tomographic techniques. Int. J. Multiph. Flow 22(S1), 99–99 (1996)
Xu, D.L.: Research on Resistivity Tomography of Smart Concrete Structure. Wuhan University of Technology (2006)
Hou, T.C., Lynch, J.P.: Electrical impedance tomographic methods for sensing strain fields and crack damage in cementitious structures. J. Intell. Mater. Syst. Struct. 20(11), 1363–1379 (2009)
Yang, C.Y., Wang, H.X., Cui, Z.Q.: Visual measurement of bubbling bed gas holdup distribution based on double-section ERT. J. Transducer Technol. 25, 1029–1033 (2012)
Zhou, X.Y., Yu, J.Q., Li, T.J.: Application of electrical impedance imaging technology in water seepage detection of cement-based materials. Nondestr. Test. 39, 26–30 (2017)
Avis, N.J., Barber, D.C., Brown, B.H., Kiber, M.A.: Back-projection distortions in applied potential tomography images due to non-uniform reference conductivity distributions. Clin. Phys. Physiol. Meas. 13(A), 113 (1992)
Geselowitz, D.B.: An application of electrocardiographic lead theory to impedance plethysmography. IEEE Trans. Biomed. Eng. 18(1), 38–41 (1971)
Murai, T., Kagawa, Y.: Electrical impedance computed tomography based on a finite element model. IEEE Trans. Biomed. Eng. 32(3), 177–184 (1985)
Yorkey, T.J., Webster, J.G., Tompkins, W.J.: An improved perturbation technique for electrical impedance imaging with some criticisms. IEEE Trans. Biomed. Eng. 34(11), 898–901 (1987)
Cheney, M., Isaacson, D., Newell, J.C., Simske, S., Goble, J.: NOSER: an algorithm for solving the inverse conductivity problem. Int. J. Imaging Syst. Technol. 2(2), 66–75 (1990)
Santosa, F., Vogelius, M.: A backprojection algorithm for electrical impedance imaging. SIAM J. Appl. Math. 50(1), 216–243 (1990)
Vauhkonen, M., Karjalainen, P.A., Kaipio, J.P.: A Kalman filter approach to track fast impedance changes in electrical impedance tomography. IEEE Trans. Biomed. Eng. 45(4), 486–493 (1998)
Yang, W.Q., Spink, D.M., York, T.A., McCann, H.J.M.S.: An image-reconstruction algorithm based on Landweber’s iteration method for electrical-capacitance tomography. Meas. Sci. 10(11), 1065 (1999)
Dong, F., Xu, L.J., Liu, X.P.: Flow pattern recognition of two-phase flow using electrical resistance tomography. Chin. J. Sci. Instrum. 22, 416–417 (2001)
Wei, Y., Yu, H.B., Wang, S.: Research on regularized generalized inverse ERT image reconstruction algorithm. Control Decis. 18, 500–503 (2003)
Liu, T.J.: Engineering Conductivity Measurement Technology and Application Research. Zhejiang University (2006)
Li, S.X., Wang, H.X., Fan, W.R.: Improved regularized ERT imaging algorithm based on three-dimensional model. J. Tian** Univ. 45, 215–220 (2012)
**ao, L.Q, Wang, H.X.: Static image reconstruction algorithm based on clustering electrical resistance tomography. Chin. J. Sci. Instrum. 1258–1266 (2016)
Huang, S., Green, R.G., Plaskowski, A., Beck, M.S.: A high frequency stray-immune capacitance transducer based on the charge transfer principle. IEEE Trans. Instrum. Meas. 37(3), 368–373 (1988)
Wang, M., Dickin, F.J., Mann, R.: Electrical resistance tomographic sensing systems for industrial applications. Chem. Eng. Commun. 175(1), 49–70 (1999)
Ma, Y.X., Xu, L.G., Jiang, C.Z.: Research on electrical resistance tomography technology. Chin. J. Sci. Instrum. 195–198+213 (2001)
Wei, Y., Yu, H.B., Wen, P.Z.: ERT sensor structure research and optimization design. Chin. J. Sci. Instrum. 24, 632–635 (2003)
Wang, H.X., Wang, J., Hu, L., Jiang, W.W., Chi, K.H., Song, Z.J.: Optimal design of ERT/ECT dual mode sensitive array electrode. J. Tian** Univ. 08, 911–918 (2008)
Wang, P.: Electrical Resistance Tomography (ERT) Technology and Its Application in Two-Phase Flow Detection. **dian University (2013)
**ao, L.Q., Wang, H.X., Nie, W.Y.: Array electrode width optimization of electrical resistance tomography system. J. Tian** Univ. 01, 79–87 (2018)
Li, C.T.: Research on the Conductivity and Pressure Sensitivity of Steel Slag Concrete. Chongqing University (2004)
Ao, Z.X.: Research on Steel Slag Graphite Conductive Asphalt Concrete. Wuhan University of Technology (2009)
Zhao, R.H., Ou, H.W., Fu, J.Y.: Study on the resistivity stability of conductive mortar mixed with industrial waste materials. Mater. Rev. 29, 129–134 (2015)
Yi, F.: Preparation and Research of Cement-Based Carbon Fiber Conductive Composite Materials. Shenzhen University (2016)
Hong, S.H., Yuan, T.F., Choi, J.S., Yoo, Y.S.: Effects of steelmaking slag and moisture on electrical properties of concrete. Materials 13(12), 2675 (2020)
Acknowledgments
This work was financially supported by Doctoral Foundation of the Shandong Natural Science Foundation (ZR2018BEE038), National Nature Science Foundation of China (51778372, 51678277), Guangdong Provincial Key Laboratory of Durability for Marine Civil Engineering (GDDCE15-05), A Project of Shandong Province Higher Educational Science and Technology 2015 (TJY1504), and the Doctoral Foundation of University of **an (XBS1437) fund.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Li, Y., Ren, H., Zhao, P., Qin, L. (2021). Research Progress of Electrical Resistance Tomography. In: Jain, L.C., Kountchev, R., Shi, J. (eds) 3D Imaging Technologies—Multi-dimensional Signal Processing and Deep Learning. Smart Innovation, Systems and Technologies, vol 234. Springer, Singapore. https://doi.org/10.1007/978-981-16-3391-1_16
Download citation
DOI: https://doi.org/10.1007/978-981-16-3391-1_16
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-3390-4
Online ISBN: 978-981-16-3391-1
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)