Abstract
The fuel consumption of vehicles can be affected by the weight of the vehicle. Trending on replacing the metal part or product with lighter composite material has emerged. By using polymer composite instead of metal material in producing an automotive component, the total weight of the vehicle will be reduced. This research aims to develop the conceptual designs of new lighter weight motorcycle handle brake lever by integrating Theory of Inventive Problem Solving (TRIZ) and FEA simulation. This research generates the best concept design based on user needs and product design specifications. TRIZ contradiction matrix and 40 inventive principles solution were applied in the early solution generation stage. The principle solution parameters for the specific design features were later refined using Morphological Chart to systematically develop numbers of concept design. After numbers of significant FEA simulation, decision-making processes are performed in selecting the most appropriate concept design. A design was selected as the best conceptual design as it has scored the highest in the concept rating. This research proves the significant contribution of integrating TRIZ and FEA simulation that will benefit the industry in conceptual design phase of producing a new product.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ding G, **e C, Zhang J, Zhang G, Song C, Zhou Z (2015) Modal analysis based on finite element method and experimental validation on carbon fibre composite drive shaft considering steel joints. Mater Res Innov 19(sup5):S5–748
Ibrahim MIF, Rosli MU, Ishak MI, Zakaria MS, Jamalludin MR, Khor CY, Rahim WMFWA, Nawi MAM, Shahrin S (2018) Simulation based optimization of injection molding parameter for meso-scale product of dental component fabrication using response surface methodology. In: RSM AIP conference proceedings, vol 2030, pp 1–6
Khan B, Rosli MU, Jahidi H, Ishak MI, Zakaria MS, Jamalludin MR, Khor CY, Faizal WM, Rahim WM, Nawi MAM (2017) Effect of zinc addition on the performance of aluminium alloy sacrificial anode for marine application. In: AIP conference proceedings vol 1885. American Institute of Physics Inc
Rosli MU, Jamalludin MR, Khor CY, Ishak MI, Jahidi H, Wasir NY, Faizal WM, Draman WNATW, Lailina NM, Ismail RI (2017) Analytical hierarchy process for natural fiber composites automotive armrest thermoset matrix selection. In: MATEC web conference, vol 97, pp 2–5
Rosli MU, Ariffin MKA, Sapuan SM, Sulaiman S (2013) Integrating TRIZ and AHP: A MPV's utility compartment improvement design concepts. Int J Mater Mech Manuf 1:32–35
Rosli MU, Ariffin MK, Sapuan SM, Sulaiman S (2014) Survey of Malaysian car owner needs of a car interior. Int J Mech Mechatron Eng 14:62–69
Rosli MU, Ariffin MKA, Sapuan SM, Sulaiman S (2013) Integrated AHP-TRIZ innovation method for automotive door panel design. Int J Eng Technol 5:3158–3167
Luqman M, Rosli MU, Khor CY, Zambree S, Jahidi H (2018) Manufacturing process selection of composite bicycle’s crank arm using analytical hierarchy process (AHP). In: IOP conference series: materials science and engineering, vol 318
Ehsani M, Ahmadi A, Fadai D (2016) Modeling of vehicle fuel consumption and carbon dioxide emission in road transport. Renew Sustain Energy Rev 53:1638–1648
Lyu M, Choi TG (2015) Research trends in polymer materials for use in lightweight vehicles. Int J Precis Eng Manuf 16(1):213–220
Ishak MI, Khor CY, Jamalludin MR, Rosli MU, Shahrin S, Wasir NY, Zakaria MS, Yamin AFM, Dahlan ND, Draman WNATW (2017) Conceptual design of automotive compressor for integrated portable air conditioning system. In: MATEC web conference, vol 97
Che Hassan MF, Mohd Rosli MU, Mohd Redzuan MA (2018) Material selection in a sustainable manufacturing practice of a badminton racket frame using Elimination and Choice Expressing Reality (ELECTRE). Method J Phys Conf Ser 1020(1):012012
Rosli MU, Ariffin MKA, Sapuan SM, Sulaiman S (2014) Integrated TRIZ-AHP support system for conceptual design. In: Applied mechanics and materials, vol 548–549. Trans Tech Publications. pp 1998–2002
Khor CY, Abdullah MZ (2013) Analysis of fluid/structure interaction: influence of silicon chip thickness in moulded packaging. Microelectron Reliab 53(2):334–347
Ong EES, Abdullah MZ, Khor CY, Loh WK, Ooi CK, Chan R (2012) Analysis of encapsulation process in 3D stacked chips with different microbump array. Int Commun Heat Mass Transf 39(10):1616–1623
Ishak MI, Abdul Kadir MR (2013) Biomechanics in dentistry: evaluation of different surgical approaches to treat atrophic maxilla patients. Springer briefs in applied sciences and technology 9783642326028 (9783642326028)
Tan JS, Khor CY, Rahim WMFWA, Ishak MI, Rosli MU, Jamalludin MR, Zakaria MS, Nawi MAM, Aziz MSA, Ani FC (2017) Influence of solder joint length to the mechanical aspect during the thermal stress analysis. In: AIP conference proceedings, vol 1885, p 20063
Ishak MI, Shafi AA, Rosli MU, Khor CY, Zakaria MS, Rahim WMFWA, Jamalludin MR (2017) Biomechanical evaluation of different abutment-implant connections—a nonlinear finite element analysis. In: AIP conference proceedings, vol 1885, p 20064
Abdul Aziz MS, Abdullah MZ, Khor CY, Fairuz ZM, Iqbal AM, Mazlan M, Rasat MSM (2014) Thermal fluid-structure interaction in the effects of pin-through-hole diameter during wave soldering. Adv Mech Eng, art. no. 275735
Cabanillas F, Maria J, Delgado O, Cabonés S, Bo B (2013) Bike brake lever designs
Mansor MR, Sapuan SM, Zainudin ES, Nuraini AA, Hambali A (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–morphological chart-analytic hierarchy process method. Mater Des 1980–2015(54):473–482
Acknowledgements
The authors gratefully acknowledge the financial support from UniMAP.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Rosli, M.U., Termizi, S.N.A.A., Khor, C.Y., Nawi, M.A.M., Chong, C.S., Ishak, M.I. (2021). Conceptual Design Selection of Motorcycle Handle Brake Lever Component by TRIZ and Simulation. In: Bahari, M.S., Harun, A., Zainal Abidin, Z., Hamidon, R., Zakaria, S. (eds) Intelligent Manufacturing and Mechatronics. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-16-0866-7_110
Download citation
DOI: https://doi.org/10.1007/978-981-16-0866-7_110
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-16-0865-0
Online ISBN: 978-981-16-0866-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)