Abstract
As per the increasing demand for energy and to save the environment, it is necessary to depend on non-conventional energy resources. One of the best alternatives adopted is solar photovoltaic (PV) system which produces the DC output. Currently, this DC output of solar PV system is converted into AC with the help of an inverter and again converted back to DC as per the need of the application. To improve the overall efficiency, conversion losses (from DC to AC then AC to DC) can be avoided by using a boost converter. To obtain N levels of output voltage, conventional boost converter along with capacitor, diode, electronic switch and inductor can be used as a DC–DC multilevel boost converter (MBC). This paper proposes an MBC topology in which a non-isolating circuit is designed and operated at high frequency. High-frequency operation results in the reduction of size of inductor and capacitor used and the ripple also reduces. The structure of the circuit is multimodular to convert low input dc voltage to high output dc voltage with low rating devices at low duty cycle. This makes the circuit more suitable for various applications such as PV system, fuel cell, home automation and electric vehicle. A detailed mathematical analysis of the proposed topology is given. To verify the mathematical results, simulations are done in MATLAB/Simulink.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
R.D. Middlebrook, Transformerless DC-to-DC converters with large conversion ratios. IEEE Trans. Power Electron. 3(4), 484–488 (1988)
D. Zhou, A. Pietkiewicz, S. Cuk, A three-switch high-voltage converter in power electronics. IEEE Trans. 14, 177–183 (1999)
B. Axelrod, Y. Berkovich, A. Ioinovici, Switched-capacitor/switched-inductor structures for getting transformerless hybrid DC–DC PWM converters. IEEE Trans. Circuits Syst. I Regul. Pap., 55(2), 687–696 (2008)
J.C. Rosas-Caro, J.M. Ramirez, F.Z. Peng, A. Valderrabano, A DC–DC multilevel boost converter. IET Power Electron. 3(1), 129 (2010)
M. Mousa, M.E. Ahmed, M. Orabi, New converter circuitry for high voltage applications using switched inductor multilevel converter, in 2011 IEEE 33rd International Telecommunications Energy Conference (INTELEC) (2011)
M. Kasper, D. Bortis, J.W. Kolar, Classification and comparative evaluation of PV panel-integrated DC–DC converter concept. IEEE Trans. Power Electron. 29(5), 2511–2526 (2014)
M. Bella, F. Prieto, S.P. Litrán, J. Manuel, E. Gómez, Combining single-switch nonisolated DC–DC converters for single-input, multiple-output applications. IEEE Ind. Electron. Mag. 10(2), 6–20 (2016)
M. Mousa, M. Hilmy, M. Ahmed, M. Orabi, A.A. El-Koussi, Optimum design for multilevel boost converter, in Fourteenth International Middle East Power Systems Conference (MEPCON) (2010), pp. 234–239
J.C. Mayo-Maldonado, R. Salas-Cabrera, J.C. Rosas-Caro, J.De Leon-Morales, E.N. Salas-Cabrera, Modelling and control of a DC–DC multilevel boost converter. IET Power Electron. 4(6), 693–700 (2011)
T.-S. Hwang, M.J. Tarca, S.-Y. Park, Dynamic response analysis of DC–DC converter with supercapacitor for direct borohydride fuel cell power conditioning system. IEEE Trans. Power Electron. 27(8), 3605–3615 (2012)
J. Huusari, T. Suntio, Origin of cross-coupling effects in distributed DC–DC converters in photovoltaic applications. IEEE Trans. Power Electron. 28(10), 4625–4635 (2013)
A. Diab-Marzouk, O. Trescases, SiC-based bidirectional Ćuk converter with differential power processing and MPPT for a solar powered aircraft. IEEE Trans. Transp. Electr. 1(4), 369–381 (2015)
Y. Chen, S. Zhao, Z. Li, X. Wei, Y. Kang, Modeling and control of the isolated DC–DC modular multilevel converter for electric ship medium voltage direct current (MVDC) power system. IEEE J. Emerg. Sel. Top. Power Electron. 99, 124–139 (2016)
A. Villarruel-Parra, A.J. Forsyth, Enhanced Average-value modeling of interleaved DC–DC converters using sampler decomposition. IEEE Trans. Power Electron. 32(3), 2290–2299 (2017)
J.R. Rahul, A. Kirubakaran, D. Vijayakumar, A new multilevel DC–DC boost converter for fuel cell based power system, in IEEE Students’ Conference on Electrical, Electronics and Computer Science (Mar 2012), pp. 1–5
S. Rezaee, E. Farjah, A DC–DC multiport module for integrating plug-in electric vehicles in a parking lot: topology and operation. IEEE Trans. Power Electron. 29(11), 5688–5695 (2014)
B. Mangu, S. Akshatha, D. Suryanarayana, B.G. Fernandes, Grid-connected PV-wind-battery-based multi-input transformer-coupled bidirectional DC–DC converter for household applications. IEEE J. Emerg. Sel. Top. Power Electron. 4(3), 1086–1095 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Singapore Pte Ltd.
About this paper
Cite this paper
Kumar, D., Kalra, D., Kumar, D. (2020). Design and Analysis of a Multilevel DC–DC Boost Converter. In: Singh Tomar, G., Chaudhari, N.S., Barbosa, J.L.V., Aghwariya, M.K. (eds) International Conference on Intelligent Computing and Smart Communication 2019. Algorithms for Intelligent Systems. Springer, Singapore. https://doi.org/10.1007/978-981-15-0633-8_108
Download citation
DOI: https://doi.org/10.1007/978-981-15-0633-8_108
Published:
Publisher Name: Springer, Singapore
Print ISBN: 978-981-15-0632-1
Online ISBN: 978-981-15-0633-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)