Abstract
In the previous section, the time element was not considered in the determination of the stability of materials exposed to a continuous force. However, this aspect is of considerable importance in designing structural components that are required to maintain dimensional stability over a long period of time while in service.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
ASM, Creep and Recovery (American Society of Metals, Metals Park, 1957)
A.C. Damask, G.J. Dienes, Point Defects in Metals (Gordon and Breach, New York, 1971)
J.E. Dorn, in Energetics in Metallurgical Phenomens, ed. by W.M. Mueller, vol. 1 (Gordon and Breach, London, 1964)
R.W. Evans, B. Wilshire, Creep of Metals and Alloys (The Institute of Metals, London, 1985)
J. Friedel, Dislocations (Addison-Wesley Publishing Company, Inc, Reading, 1964)
F. Garofalo, Fundamentals of Creep and Creep-Rupture in Metals (The Macmillan Company, New York, 1965)
D. McLean, Mechanical Properties of Metals (Wiley, New York, 1962)
D. McLean, K.F. Hale, Structural Processes in Creep. Special Report No. 70 (Iron and Steel Institute, London, 1961)
F.R.N. Nabarro, Report on a conference on strength of solids (Physical Society of London, London, 1948), p. 75
F.R.N. Nabarro, H.L. De Villers, The Physics of Creep (Taylor & Francis, London, 1995)
F.H. Norton, The Creep of Steels at High Temperatures (McGraw-Hill, New York, 1929)
A.L. Ruoff, Materials Science (Prentice-Hall, Inc, Englewood Cliffs, 1973)
C. Zener, Elasticity and Anelasticity (University of Chicago Press, Chicago, 1948)
Further References
T.H. Alden, Acta Metall. 35, 11, 2621 (1987)
H.G. Armaki, R. Chen, K. Maruyama, M. Igarashi, Mater. Sci. Eng. A 527, 6581 (2010)
A.N.da C. Andrade, Proc. R. Soc. Lond. A 84, 1 (1910)
A.N.da C. Andrade, Proc. R. Soc. Lond. A 904, 329 (1914)
A.N.da C. Andrade, in Creep and Recovery, ed. by ASM (American Society of Metals, Metals Park, 1957), p. 176
A.N.da C. Andrade, B. Chalmers, Proc. R. Soc. Lond. A 138, 348 (1932)
R.W. Bailey, J. Inst. Met. 35, 27 (1926)
J. Beddoes, W. Wallace, Metallography 13, 85 (1980)
R.L. Bell, T.G. Langdon, J. Mater. Sci. 2, 313 (1967)
W. Blum, Phys. Stat. Sol. (b) 45, 561 (1971)
H. Butt, J.P. Dennison
P. Caron, T. Khan, Mater. Sci. Eng. 61, 173 (1983)
H.C. Chang, N.J. Grant, Trans. AIME 206, 544 (1956)
R.L. Coble, J. Appl. Phys. 34, 1679 (1963)
A.H. Cottrell, J. Mech. Phys. Solid. 1, 58 (1952)
F. Dobeš, J. Mater. Sci. 33, 2457 (1998)
F. Dobeš, K. Milicka, Met. Sci. 10, 382 (1976)
J.E. Dorn, J. Mech. Phys. Solid. 8, 85 (1954)
J.F. dos Reis Sobrinho, L. de Oliveira Bueno, Rev. Matér. 10, 463 (2005)
B.F. Dyson, M. Mclean, Acta Met. 31(17), 27 (1983)
P.J. Ennis, A. Czyrska-Filemonowicz, Sādhānā 28, 709 (2003)
A. Fehér, S. Linn, M. Schwienheer, A. Scholz, C. Berger, Mater. Sci. Eng. A 510–511, 29 (2009)
H. Fukutomi, H. Takatobi, R. Horiuchi, Jpn. Inst. Met. 46, 755 (1982)
C. Gandhi, R. Raj, Met. Trans. A12, 515 (1981)
F. Garofalo, R.W. Whitemore, W.F. Domis, F. von Gemmingen, Trans. AIME 221, 310 (1961)
I.M. Glen, Philos. Mag. 1, 400 (1956)
A. Graham, K.F.A. Walles, J. Iron Steel Inst. 179, 105 (1955)
J. Harper, J.E. Dorn, Acta Met. 5, 654 (1957)
X. He, IEEE 978, 1049 (2009)
M. Heikmaier, B. Reppich, Met. Mater. Trans. A 27A, 3861 (1996)
K.J. Hemker, M.J. Mills, W.D. Nix, Acta Met. Mater. 39, 1901 (1991)
C. Herring, J. Appl. Phys. 21, 437 (1950)
H.U. Hong, B.G. Choi, H.W. Jeong, I.S. Kim, Y.S. Yoo, C.Y. Jo, ed. by T. Chandra, M. Ionescu, N. Wanderka, W. Reimers, Mater. Sci. Forum THERMEC, 638, 2245 (2010)
O.A. Kaibyshev, R.Z. Valiev, V.G. Khairullin, Fiz. Metallov i Metallovedenie 56, 577 (1983)
R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, D.A. Woodford (eds.), Superalloys (The Minerals, Metals and Materials Society, Warrendale, 1996). 283, 290 pp
R.L. Klueh, J. Nucl. Mater. 79, 363 (1979)
A.K. Koul, R. Castillo, K. Willett, Mater. Sci. Eng. 66, 213 (1984)
T.G. Langdon, Mater. Sci. Eng., A166, 67 (1993)
T.G. Langdon, J. Mater. Sci. 41, 597 (2006)
F.R. Larson, J. Miller, Trans. ASME 74, 765 (1952)
R. Le Hazif, J.P. Poirer, Acta Met. 23, 865 (1975)
G.R. Leverant, H.B. Kear, J.M. Oblak, Met. Trans. 4(335), 362 (1973)
J.C. Li, Acta Met. 21, 1195 (1963)
V.K. Lindroos, H.M. Kiekk-oja, Philos. Mag. 17, 119 (1968)
R.C. Lobb, Mater. Sci. Eng. 38, 249 (1979)
P. Lukáš, J. Čadek, V. Šustek, L. Kunz, Mater. Sci. Eng. A208, 149 (1996)
R.A. MacKay, R.D. Maier, Met. Trans. A 13A, 1747 (1982)
K. Maruyama, K. Sawada, J. Koike, ISIJ Int. 41, 641 (2001)
T. Matsunaga, T. Kameyama, E. Sato, IOP Conf. Ser. Mater. Sci. Eng. 3, 012014 (2009). IOP publishing
D. McLean, Rep. Prog. Phys. 29, 1 (1966)
S.K. Mitra, D. McLean, Proc. R. Soc. 285A, 288 (1966)
E.C. Monkman, N.J. Grant, Proc. Am. Soc. Test. Mater. 56, 593 (1956)
B.L. Mordike, Mater. Sci. Eng. A324, 103 (2002)
N.F. Mott, Philos. Mag. 43, 1151 (1952)
N.F. Mott, Proc. R. Soc. Lond. A 220, 1 (1953)
V. Murali, M.D. Mathew, K.B.S. Rao, V. Ganesan, S. Ravi, S. Baskar, N. Angaraj, Trans. Indian Inst. Met. 63, 635 (2010)
F.R.N. Nabarro, Philos. Mag. 16, 231 (1967)
F.R.N. Nabarro, Mater. Sci. Eng. A309, 227 (2001)
V.D. Natsik, A.I. Osetski, V.P. Soldatov, V.I. Stratsev, Phys. Status Sol. (b) 34, 99 (1972)
Levi de Oliveira Bueno, Vitor Luiz Sordi, Luiz Marino, Mater. Res. 8, 401 (2005)
E. Orowan, J. West Scot. Iron Steel Inst. 54, 45 (1947)
R.L. Orr, O.D. Sherby, J.E. Dorn, Trans. ASM 46, 113 (1954)
A.I. Osetski, V.P. Soldatov, V.I. Stratsev, V.D. Natsik, Phys. Status Sol. (b) 22, 739 (1974)
W.D. Pridemore, J Fail. Anal. Prevent, 8, 281 (2008)
T.M. Pollock, A.S. Argon, Acta Metall. Mater. 40, 1 (1992)
S.C. Prasad, I.J. Rao, K.R. Rajagopal, Acta Mater. 53, 669 (2005)
R. Raj, Met. Trans. A12, 1089 (1981)
W. Raman, Met. Trans. A17, 1100 (1986)
M. Rieth, A. Falkenstein, P. Graf, S. Heger, U. Jantsch, M. Klimiankou, E. Materna-Morris and H. Zimmermann, Inst. For Materialforschung Program Kernfusion, Forschungszentrum, Karlsruhe, in der Helmholtz-Gemeinschaft Wissenschaftliche Berichte, FZKA 7065, November2004
V. Sass, U. Glatzel, M. Feller-Kniepmeier, Creep anisotropy in the monocrystalline nickel-base superalloy CMSX-4, in Superalloys (The Minerals, Metals and Materials Society, Warrendale, 1996)
G. Schoeck, A. Seeger, Report on the Conference on Defects in a Crystalline Solid (Physical Society of London, London, 1955), p. 340
O.D. Sherby, J.E. Dorn, Creep correlations in alpha solid solutions of aluminum. Trans. AIME 4, 959 (1952)
O.D. Sherby, J.L. Lyton, Trans. AIME 206, 928 (1956)
O.D. Sherby, R.L. Orr, J.E. Dorn, Trans. AIME 200, 71 (1954)
O.D. Sherby, J.L. Lyton, J.E. Dorn, Acta Met. 219 (1957)
I. Shi, D.O. Northwood, Acta Met. Mater. 42, 871 (1994)
V.I. Stratsev, A.I. Osetski, V.P. Soldatov, E.E. Badyan, Pham Duyen, A.M. Gorki, J. Mater. Sci. 10, 387 (1975)
M. Suzuki, T. Kimura, J. Koike, K. Maruyama, Mat. Sci. Eng. A387, 706 (2004)
J.C. Tan, M.J. Tan, Mater. Sci. Eng. A339, 81 (2003)
Y. Terada, T. Sato, J. Alloys Compd. 504, 261 (2010)
M.D. Uchic, D.C. Chrzan, W.D. Nix, Intermetallics 9, 963 (2001)
R.Z. Valiev, V.Yu. Gertsman, O.A. Kaibyshev, Phys. Status Sol. (a) 97, 11 (1986)
J. Wadsworth, O.A. Ruano, O.D. Sherby, Met. Mater. Trans. 33A, 219 (2002)
C.W. Weaver, J. Inst. Met. 87, 126 (1958–1959)
J. Weertman, J. Appl. Phys. 26, 1213 (1955)
J. Weertman, J. Appl. Phys. 26, 1213 (1955b)
J. Weertman, J. Appl. Phys. 28(196), 1185 (1957a)
J. Weertman, J. Appl. Phys. 28(196), 362 (1957b)
J. Weertman, Trans. ASM 61, 680 (1968)
O.H. Wyatt, Proc. Phys. Soc. B66, 495 (1953)
C. Yuan, J. Guo, S. Wang, J. Mater. Sci. Technol. 14, 219 (1998)
J.X. Zhang, J.C. Wang, H. Harada, Y. Koizumi, Acta Mater. 53, 4623 (2005)
S.M. Zhu, S.J. Tjong, Met. Mater. Trans. A 29A, 299 (1998)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer Science+Business Media Dordrecht
About this chapter
Cite this chapter
Pelleg, J. (2013). Time Dependent Deformation – Creep. In: Mechanical Properties of Materials. Solid Mechanics and Its Applications, vol 190. Springer, Dordrecht. https://doi.org/10.1007/978-94-007-4342-7_5
Download citation
DOI: https://doi.org/10.1007/978-94-007-4342-7_5
Published:
Publisher Name: Springer, Dordrecht
Print ISBN: 978-94-007-4341-0
Online ISBN: 978-94-007-4342-7
eBook Packages: EngineeringEngineering (R0)