SpringerLink
Log in

Solid-State Joining by Roll Bonding and Accumulative Roll Bonding

  • Conference paper
  • First Online:
Advances in Material Forming and Joining

Part of the book series: Topics in Mining, Metallurgy and Materials Engineering ((TMMME))

Abstract

This chapter is intended to present the basic concept of roll bonding (RB) and accumulative roll bonding (ARB) of light-weight ductile metals. For this purpose, a discussion on previous research works on RB and ARB has been incorporated in this chapter. The general mechanisms of joining after rolling and several applications of RB and ARB have also been discussed. In the present study, an investigation on influence of various parameters on joint strength was conducted. Preheat temperature and percentages of thickness reduction are found to influence joint strength in a significant manner. The influence of annealing temperature and annealing time on mechanical properties of roll-bonded products in terms of controlling parameters has also been discussed here. The significant influence of preheat temperature and corresponding thickness reduction on the bond strength has been thoroughly discussed with a mechanism of peel testing. An attempt has been made to establish the mechanism behind failure along the joining line during peel testing of bond strength of solid-state welding through rolling.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Subscribe and save

Springer+ Basic
EUR 32.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or Ebook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 169.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free ship** worldwide - see info
Hardcover Book
USD 169.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free ship** worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  • Calvo FA, Urena A, Gomez De Salazar JM, Molleda F, Criado AJ (1988) Solid-state transformations during diffusion bonding of copper to iron. J Mater Sci 23:1231–1236

    Article  Google Scholar 

  • Chen Z, Luo T, Hang T, Li M, Hu A (2012) Low-temperature solid state bonding of Sn and Nickel micro cones for micro interconnection. ECS Solid State Lett 1:7–12

    Article  Google Scholar 

  • Cooper DR, Allwood JM (2014) The influence of diffusion mechanisms in aluminium solid-state welding processes. In: Procedia Engineering 11th International Conference on Technology of Plasticity, ICTP 2014

    Google Scholar 

  • Costa ALM, Reis ACC, Kestens L, Andrade MS (2006) Ultra grain refinement and hardening of IF-steel during accumulative roll-bonding. Mater Sci Eng A 406:279–285

    Article  Google Scholar 

  • Eizadjou M, Danesh Manesh H, Janghorban K (2009) Mechanism of warm and cold roll bonding of aluminum alloy strips. Mater Des 30:4156–4161

    Article  Google Scholar 

  • Hong-zhi Y (2006) Key factors for warm rolled bond of 6111-aluminium strip. Trans Nonferrous Met Soc China 16:84–90

    Article  Google Scholar 

  • Jamaati R, Toroghinejad MR (2010) Effect of friction, annealing conditions and hardness on the bond strength of Al/Al strips produced by cold roll bonding process. Mater Des 31:4508–4513

    Article  Google Scholar 

  • Kazakov NF (1985a) An outline of diffusion bonding in vacuum. Diffus Bond Mater 10–16

    Google Scholar 

  • Kazakov NF (1985b) A theory of diffusion bonding. Diffus Bond Mater 17–48

    Google Scholar 

  • Kazakov NF (1985c) Principal bonding variables and recommended. Procedures for diffusion bonding in vacuum. Diffus Bond Mater 49–70

    Google Scholar 

  • Kim SH, Kim HW, Euh K, Kang JH, Cho JH (2012) Effect of wire brushing on warm roll bonding of 6XXX/5XXX/6XXX aluminum alloy clad sheets. Mater Des 35:290–295

    Article  Google Scholar 

  • Klomp JT, Van De Ven AJC (1980) Parameters in solid-state bonding of metals to oxide materials and the adherence of bonds. J Mater Sci 15:2483–2488

    Article  Google Scholar 

  • Krallics G, Lenard JG (2004) An examination of the accumulative roll-bonding process. J Mater Process Technol 152:154–161

    Article  Google Scholar 

  • Lemus-Ruiz J, Ceja-Cardenas L, Bedolla-Becerril E, Lopez-Morelos VH (2011) Production, characterization, and mechanical evaluation of dissimilar metal/ceramic joints. Nanocomposites Unique Prop Appl Med Ind. InTech 205–224

    Google Scholar 

  • Liu CY, Wang Q, Jia YZ, **g R, Zhang B, Ma MZ, Liu RP (2012) Microstructures and mechanical properties of Mg/Mg and Mg/Al/Mg laminated composites prepared via warm roll bonding. Mater Sci Eng A 556:1–8

    Article  Google Scholar 

  • Madaah-Hosseini HR, Kokabi AH (2002) Cold roll bonding of 5754-aluminum strips. Mater Sci Eng A 335:186–190

    Article  Google Scholar 

  • Manesh DH, Taheri AK (2003) The effect of annealing treatment on mechanical properties of aluminum clad steel sheet. Mater Des 24:617–622

    Article  Google Scholar 

  • Manesh HD, Taheri AK (2004) Study of mechanisms of cold roll welding of aluminum alloy to steel strip. Mater Sci Technol 20:1064–1068

    Article  Google Scholar 

  • Masoumi M, Emadoddinm E (2013) Interface characterization and formability of two and three-layer composite sheets manufactured by roll bonding. Mater Des 44:392–396

    Article  Google Scholar 

  • Milner JL, Abu-Farha F, Bunget C, Kurfess T, Hammond VH (2013) Grain refinement and mechanical properties of CP-Ti processed by warm accumulative roll bonding. Mater Sci Eng A 56:109–117

    Article  Google Scholar 

  • Moore JJ, Wilson DV, Roberts WT (1981) Evaluation of formable light metal-alloy steel composites. Mater Sci Eng 48:123–136

    Article  Google Scholar 

  • Saito Y, Tsuji N, Utsunomiya H, Sakai T, Hong RG (1998) Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process. Scripta Mater 39:1221–1227

    Article  Google Scholar 

  • Saito Y, Utsunomiya H, Tsuji N, Sakai T (1999) Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding (ARB) process. Acta Mater 47:579–583

    Article  Google Scholar 

  • Shaarbaf M, Toroghinejad MR (2008) Nano-grained copper strip produced by accumulative roll bonding process. Mater Sci Eng A 473:28–33

    Article  Google Scholar 

  • Shabani A, Toroghinejad MR, Shafyei A (2012) Effect of post-rolling annealing treatment and thickness of nickel coating on the bond strength of Al–Cu strips in cold roll bonding process. Mater Des 40:212–220

    Article  Google Scholar 

  • Sheng LY, Yang F, ** TF, Lai C, Ye HQ (2011) Influence of heat treatment on interface of Cu/Al bimetal composite fabricated by cold rolling. Compos B 42:1468–1473

    Article  Google Scholar 

  • Su I, Lu C, Tieu K, Deng G (2013) Annealing behavior of accumulative roll bonding processed aluminum composites. Steel Res Int 84:1241–1245

    Article  Google Scholar 

  • Taheri AK, Maccagno TM, Jonas JJ (1995) Dynamic strain aging and the wire drawing of low carbon steel rods. ISIJ Int 35:1532–1540

    Article  Google Scholar 

  • Tolaminejad B, Arabi H (2008) A study of roll-bonding MS90 alloy to steel utilizing chromized interlayer. Iran J Sci Technol Trans B Eng 32:631–640

    Google Scholar 

  • Toroghinejad MR, Ashrafizadeh F, Jamaati R (2013) On the use of accumulative roll bonding process to develop nanostructured aluminum alloy 5083. Mater Sci Eng A 561:145–151

    Article  Google Scholar 

  • Tsuji N, Saito Y, Utsunomiya H, Tanigawa S (1999) Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process. Scripta Mater 40:795–800

    Article  Google Scholar 

  • Wright PK, Snow DA, Tay CK (1978) Interfacial conditions and bond strength in cold pressure welding by rolling. Met Technol 444:24–31

    Article  Google Scholar 

  • **ng ZP, kang SB, Kim HW (2002) Structure and properties of AA3003 alloy produced by accumulative roll bonding process. J Mater Sci 37:717–722

    Article  Google Scholar 

  • Yoda R, Shibata K, Morimitsu T, Terada D, Tsuji N (2011) Formability of ultrafine-grained interstitial-free steel fabricated by accumulative roll-bonding and subsequent annealing. Scripta Mater 65:175–178

    Article  Google Scholar 

  • Zhang BW, Bay N (1997) Cold welding experimental the surface preparation investigation methods. Weld Res Suppl 326s–330s

    Google Scholar 

  • Zhang XP, Yang TH, Castagne S, Gu CF, Wang JT (2011) Proposal of bond criterion for hot roll bonding and its application. Mater Des 32:2239–2245

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur, 721302, India

    Suprim Sardar & Shiv Brat Singh

  2. Department of Mechanical Engineering, Indian Institute of Technology Kharagpur, Kharagpur, 721302, India

    Atanu Mandal & Surjya K. Pal

Authors
  1. Suprim Sardar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Atanu Mandal
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Surjya K. Pal
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Shiv Brat Singh
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Suprim Sardar .

Editor information

Editors and Affiliations

  1. Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India

    R. Ganesh Narayanan

  2. Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, Assam, India

    Uday Shanker Dixit

Rights and permissions

Reprints and permissions

Copyright information

© 2015 Springer India

About this paper

Cite this paper

Sardar, S., Mandal, A., Pal, S.K., Singh, S.B. (2015). Solid-State Joining by Roll Bonding and Accumulative Roll Bonding . In: Narayanan, R., Dixit, U. (eds) Advances in Material Forming and Joining. Topics in Mining, Metallurgy and Materials Engineering. Springer, New Delhi. https://doi.org/10.1007/978-81-322-2355-9_18

Download citation

  • DOI: https://doi.org/10.1007/978-81-322-2355-9_18

  • Published:

  • Publisher Name: Springer, New Delhi

  • Print ISBN: 978-81-322-2354-2

  • Online ISBN: 978-81-322-2355-9

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation