Abstract
For the sake of completeness, a brief overview of safety-relevant aspects of hydrogen and its technical applications follows. The safe handling of hydrogen requires knowledge of its properties and the observance of the resulting safety measures. This ranges from the correct choice of materials to compliance with explosion protection guidelines. In recent years, increasing efforts have been made to formulate corresponding internationally valid regulations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Literature
Nakhosteen, C. B.: Einfluss von Wasserstoff bei der Verarbeitung und Anwendung metallischer Werkstoffe. Galvanotechnik 94 (8), S. 1921–1926, 2003
San Marchi, C.; Somerday, B. P.; Robinson, S. L.: Hydrogen Pipeline and Material Compatibility Research at Sandia. Sandia National Laboratories, (14.10.2017). http://www.fitness4service.com/news/pdf_downloads/h2forum_pdfs/SanMarchi-SNL.pdf
Heffel, W.; Das, L.M.; Park, S.; Norbeck, M.: An Assessment of Flow Characteristics and Energy Levels from a Gaseous Fuel Injector using Hydrogen and Natural Gas. SAE paper 2001-28-0031, 2001
Stockhausen, W.; Natkin, R.; Kabat, D.; Reams, L.; Tang, X.; Hashemi, S.; Szwabowski, S.; Zanardelli, V.: Ford P2000 Hydrogen Engine Design and Vehicle Development Program. SAE paper 2002-01-0240, 2002
San Marchi, C.: Technical Reference on Hydrogen Compatibility of Materials, Austenitic Stainless Steels A-286 (code 2301). Sandia National Laboratories, May 2005 http://www.sandia.gov/matlsTechRef/chapters/2301TechRef_A286.pdf (14.10.2017)
San Marchi, C.: Technical Reference on Hydrogen Compatibility of Materials, Low Alloy Ferritic Steels: Tempered Fe-Cr-Mo Alloys (code 1211). Sandia National Laboratories, December 2005 http://www.sandia.gov/matlsTechRef/chapters/1211TechRef_FeCrMo_T.pdf (14.10.2017)
San Marchi, C.: Technical Reference on Hydrogen Compatibility of Materials, Low Alloy Ferritic Steels: Tempered Fe-Ni-Cr-Mo Alloys (code 1212). Sandia National Laboratories, December 2005, (14.10.2017) http://www.sandia.gov/matlsTechRef/chapters/1212TechRef_FeNiCrMo_T.pdf
San Marchi, C.: Technical Reference on Hydrogen Compatibility of Materials, Austenitic Stainless Steels Type 316 (code 2103). Sandia National Laboratories, March 2005 http://www.sandia.gov/matlsTechRef/chapters/2103TechRef_316SS.pdf (14.10.2017)
Dadieu, A.; Damm, R.; Schmidt, E.: Raketentreibstoffe. Springer Verlag, Wien New York, ISBN 9783211808566, 1968
Eichner, T.: Kryoverdichtung, Erzeugung von Hochdruckwasserstoff. Diplomarbeit, Technische Universität Graz, 2005
Klell, M.; Eichlseder, H.; Sartory, M.: Mixtures of Hydrogen and Methane in the Internal Combustion Engine – Synergies, Potential and Regulations. International Journal of Hydrogen Energy, Vol. 37, S. 11531 – 11540, 2012
Sartory, M.; Sartory, M.; Analyse eines skalierbaren Anlagenkonzepts für die dezentrale Wasserstoffversorgung, Dissertation, Technische Universität Graz, 2018
Europäische Kommission: Klimapolitik https://ec.europa.eu/clima/policies/strategies/2030_de (24.07.2017)
EUR-Lex – Der Zugang zum EU Recht, http://eur-lex.europa.eu
Bundesgesetzblatt der Republik Deutschland [45], Gesetz zum Schutz vor gefährlichen Stoffen, Chemikaliengesetz in der Fassung der Bekanntmachung vom 20. Juni 2002 (BGBl. I S. 2090), zuletzt geändert durch Artikel 231 der V. v. 31. Oktober 2006 (BGBl. I S. 2407)
Bundesgesetzblatt für die Republik Österreich [44], BGBl. I Nr. 53/1997 Chemikaliengesetz 1996 (ChemG)
ECHA, European Chemicals Agency, www.echa.europa.eu
Bundesgesetzblatt der Republik Deutschland [45], Neunte Verordnung zum Geräte- und Produktsicherheitsgesetz (Maschinenverordnung) vom 12. Mai 1993 (BGBl. I S. 704), zuletzt geändert durch Artikel 1 V v. 18. 6. 2008 I 1060
Bundesgesetzblatt für die Republik Österreich [44], Maschinen-Sicherheitsverordnung 2010 – MSV 2010, BGBl. Nr. 282/2008
Bundesgesetzblatt der Republik Deutschland [45], Vierzehnte Verordnung zum Geräte- und Produktsicherheitsgesetz (Druckgeräteverordnung) (14. GPSGV)
Bundesgesetzblatt für die Republik Österreich [44], BGBl. II Nr. 426/1999 Druckgeräteverordnung 1999 (DGVO)
ATEX Richtlinien, Druckgeräte online, http://www.druckgeraete-online.de/seiten/frameset10.htm (20.10.2017)
Bundesgesetzblatt für die Republik Österreich [44], BGBl II Nr. 309/2004 Verordnung explosionsfähige Atmosphären 2004 (VEXAT)
Bundesgesetzblatt für die Republik Österreich [44], BGBl Nr. 450/1994 i. d. F. BGBl. I Nr. 159/2001, Arbeitnehmerinnenschutzgesetz 2001 (AschG)
Groethe, M.; Merilo, E.; Colton, J.; Chiba, S.; Sato, Y., Iwabuchi, H.: Large-scale hydrogen deflagrations and detonations, Int. J. Hydrogen Energy, 32, S. 2125–2133, 2007
Grossel, S. S.: Deflagration and Detonation Flame Arresters. American Institute of Chemical Engineers, New York, ISBN 9780816907915, 2002
Steen, H.: Handbuch des Explosionsschutzes, Verlag Wiley-VCH, Weinheim, ISBN 9783527298488, 2000
United Nations Economic Commission for Europe, UNECE, http://www.unece.org
Österreichisches Normungsinstitut, http://www.on-norm.at
DIN Deutsches Institut für Normung e. V., http://www.din.de
Japanese Standards Association, http://www.jsa.or.jp
American National Standards Institute – ANSI, http://www.ansi.org
Europäisches Komitee für Normung, Comité Européen de Normalisation CEN, http://www.cen.eu
International Organization for Standardization ISO, http://www.iso.org
Deutsche Vereinigung für das Gas- und Wasserfach, http://www.dvgw.de
Österreichischen Vereinigung für das Gas- und Wasserfach, http://www.ovgw.at
Hydrogen/Fuel Cell Codes and Standards, http://www.fuelcellstandards.com/home.html (22.12.2011)
UNECE, Global Technical Regulation No. 13 (Hydrogen and fuel cell vehicles) https://www.unece.org/trans/main/wp29/wp29wgs/wp29gen/wp29glob_registry.html (27.09.2017)
HyApproval – Handbook for Approval of Hydrogen Refuelling Stations, http://www.hyapproval.org (14.10.2017)
Hydrogen Cars Now, http://www.hydrogencarsnow.com/index.php/fuel-cells/allis-chalmers-farm-tractor-was-first-fuel-cell-vehicle/ (22.08.2017)
HySafe, Network of Excellence for Hydrogen Safety, http://www.hysafe.org
NASA (National Aeronautics and Space Administration), Safety Standard for Hydrogen and Hydrogen Systems. Washington D.C., 1997 http://www.hq.nasa.gov/office/codeq/doctree/canceled/871916.pdf (14.01.2010)
Swain, M. R.: Fuel Leak Simulation. Proceedings of the 2001 DOE Hydrogen Program Review, U. S. Department of Energy, NREL/CP-570-30535, 2001 https://www1.eere.energy.gov/hydrogenandfuelcells/pdfs/30535be.pdf (14.10.2017)
Rossegger W.; Posch U.: Design Criteria and Instrumentation of Hydrogen Test Benches. Beitrag zum 1st International Symposium on Hydrogen Internal Combustion Engines, Mitteilungen des Instituts für Verbrennungskraftmaschinen und Thermodynamik, Technische Universität Graz, 2006
Aroutiounian, V. M.: Hydrogen Detectors. Int. Sc. J. for Alternative Energy and Ecology, ISJAEE 3 (23), S. 21–31, 2005
Baselt, D.R.; Fruhberger, B.; Klaassen, E. et.al: Design and performance of a microcantilever-based hydrogen sensor. Sensors and Actuators B 88, S. 120–131, 2003
Bronkhorst High-Tech B.V., http://www.bronkhorst.com
Butler, M. A.; Sanchez, R.; Dulleck, G. R.: Fiber Optic Hydrogen Sensor. Sandia National Laboratories, May 1996
COSA Instrument, Industrial Instrumentation for Laboratory and Process, http://www.cosa-instrument.com
Drägersafety, http://www.draeger.at
Endress und Hausner, http://www.endress.de
Nakagawa, H.; Yamamoto, N.; Okazaki, S.; Chinzei, T.; Asakura, S.: A room-temperature operated hydrogen leak sensor. Sensors and Actuators B 93, S. 468–474, 2003
Okazaki, S.; Nakagawa, H.; Asakura, S.; Tomiuchi Y.; Tsuji, N.; Murayama, H.; Washiya, M.: Sensing characteristics of an optical fiber sensor for hydrogen leak. Sensors and Actuators B 93, S. 142–147, 2003
Hydrogen Council 2017, http://hydrogeneurope.eu/wp-content/uploads/2017/01/20170109-HYDROGEN-COUNCIL-Vision-document-FINAL-HR.pdf (24.07.2017)
Bundesgesetzblatt für die Republik Österreich [44], BGBl. Nr. 194/1994 Gewerbeordnung 1994 (GewO)
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2023 Springer Fachmedien Wiesbaden GmbH, part of Springer Nature
About this chapter
Cite this chapter
Klell, M., Eichlseder, H., Trattner, A. (2023). Materials, Law and Safety. In: Hydrogen in Automotive Engineering. Springer, Wiesbaden. https://doi.org/10.1007/978-3-658-35061-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-658-35061-1_9
Published:
Publisher Name: Springer, Wiesbaden
Print ISBN: 978-3-658-35060-4
Online ISBN: 978-3-658-35061-1
eBook Packages: EngineeringEngineering (R0)